{"title":"Compact Backyard Skate Ramp Setups","description":"\u003cp\u003e\u0026lt;p\u0026gt;A compact backyard setup can still give you more than one way to skate. Start with one transition, rail, box, or launch obstacle, then use the open space around it for a clean approach and roll-away.\u0026lt;\/p\u0026gt;\u0026lt;p\u0026gt;These products have a compact measured base, compact components, or a small or modular product form that makes them a reasonable starting point for a smaller yard. That includes the portable Road Series obstacles. This is not a minimum-yard promise. Measure the complete line, including the approach and roll-away, not just the ramp or one component.\u0026lt;\/p\u0026gt;\u003c\/p\u003e","products":[{"product_id":"bump-to-butter","title":"Bump to Butter Skate Obstacle","description":"  \u003cp\u003e\u003cstrong\u003eA compact obstacle that joins a bump to a Butter surface\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBump to Butter combines a 12-inch bump, a 17-inch rail element, and a dedicated Butter sliding surface in one 8-foot obstacle. It is for a setup that needs more than a simple bank and wants the bump, rail, and sliding decision to live together.\u003c\/p\u003e\u003ch2\u003eOne obstacle, three distinct surfaces\u003c\/h2\u003e\u003cp\u003eBump to Butter brings together a 12-inch bump, a 17-inch rail element, and a Butter sliding surface. That combination creates a different choice from a plain wedge or standalone rail. Pick it when the session needs transition into a dedicated slide-and-grind feature.\u003c\/p\u003e\u003ch2\u003ePlan for eight feet of obstacle\u003c\/h2\u003e\u003cp\u003eThe Bump to Butter measures 4 feet wide and 8 feet long. Those dimensions make it a substantial compact obstacle, not a small add-on beside another feature. Leave clear pavement on both sides so riders can reach and leave the bump without crowding the setup.\u003c\/p\u003e\u003ch2\u003eBuild the bump and Butter feature deliberately\u003c\/h2\u003e\u003cp\u003eAssembly requires a drill and takes about one to two hours. That work joins the bump, rail element, and Butter surface into one obstacle instead of three movable pieces. Set aside a focused build period, keep each section aligned, and inspect the completed feature before the first session.\u003c\/p\u003e\u003ch2\u003eKeep paint on the exposed plywood\u003c\/h2\u003e\u003cp\u003eOne quart of Skate Paint is specified for the Bump to Butter's exposed plywood. The paint choice belongs to the wooden ramp material, while the Butter surface remains the dedicated sliding element. That distinction keeps the finish plan matched to the product's actual parts.\u003c\/p\u003e\u003ch2\u003eUse the Butter surface for its own job\u003c\/h2\u003e\u003cp\u003eThe Butter material is the Bump to Butter's dedicated working surface for slides and grinds. It is not decorative trim on a generic ramp. The product is worth choosing when that separate sliding surface matters as much as the 12-inch bump and rail height.\u003c\/p\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAssembly details\u003c\/h3\u003e\u003cp\u003eBump to Butter has an estimated one-to-two-hour assembly window and requires a drill. Build the bump, rail, and Butter surface as one connected feature, then confirm their alignment on level pavement.\u003c\/p\u003e\u003ch3\u003eQuestions about Bump to Butter Skate Obstacle\u003c\/h3\u003e\u003ch4\u003eHow does the Bump to Butter Skate Obstacle differ from Bump to Rail?\u003c\/h4\u003e\u003cp\u003eBump to Butter adds a broad Butter sliding surface to the bump concept, while Bump to Rail centers its connected red rail. Compare the working surface the rider actually wants to use. Both combine obstacle jobs, but they lead to different slide-and-grind decisions.\u003c\/p\u003e\u003ch4\u003eWho should consider Bump to Butter instead of a plain bank?\u003c\/h4\u003e\u003cp\u003eIt suits a rider who wants a launch to feed directly into a dedicated slide-and-grind surface. A plain bank keeps the transition job simpler. Choose the combined obstacle only when the Butter section will be used enough to justify giving up the flexibility of separate pieces.\u003c\/p\u003e\u003ch4\u003eWhen would separate obstacles make more sense than Bump to Butter?\u003c\/h4\u003e\u003cp\u003eChoose separate pieces when the layout needs the bump and sliding feature to move independently or serve different routes. Bump to Butter makes more sense when their fixed relationship is the advantage. The decision is modular freedom versus one repeatable combined obstacle.\u003c\/p\u003e\u003ch4\u003eHow can riders use the Bump to Butter Skate Obstacle?\u003c\/h4\u003e\u003cp\u003eUse the Bump to Butter Skate Obstacle as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Bump to Butter Skate Obstacle if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003elaunch ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Bump only","offer_id":39508938064055,"sku":"BumpToButter","price":599.0,"currency_code":"USD","in_stock":true},{"title":"Bump + Flat Section","offer_id":39508938031287,"sku":"BumpToButter+FlatSection","price":828.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/bump1.jpg?v=1729241229"},{"product_id":"blue-tile-quarterpipe-by-brad-mcclain","title":"Brad McClain Blue Tile Quarter Pipe","description":"  \u003cp\u003e\u003cstrong\u003eBrad McClain's Blue Tile, built into the transition\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBrad McClain's Blue Tile Quarter Pipe brings its own visual character to a home transition with enough width to skate without turning a smaller space into a permanent construction zone. It is a choice for someone who wants the graphic and the transition to carry equal weight.\u003c\/p\u003e\u003ch2\u003eUse four feet of width with intention\u003c\/h2\u003e\u003cp\u003eThe Blue Tile Quarter Pipe is 2 feet tall, 4 feet wide, 4 feet deep, and 68 pounds. That gives the transition more room than a very compact ramp while keeping its overall footprint manageable. Confirm the approach and roll-away before committing to the graphic, because the usable session starts outside the ramp itself.\u003c\/p\u003e\u003ch2\u003eChoose a transition with its own character\u003c\/h2\u003e\u003cp\u003eThe Blue Tile design is specific to this Brad McClain product, not a finish that transfers to every quarter pipe. It lets the ramp read as a considered piece of the setup rather than a blank utility feature. Choose it when the artwork matters as much as having a two-foot transition close to home.\u003c\/p\u003e\u003ch2\u003eUse paint only for the exposed plywood\u003c\/h2\u003e\u003cp\u003eThis ramp can be ordered without Skate Paint or with one quart for exposed plywood. Paint protects that wood without changing the Blue Tile artwork. GatorSkins and Skatelite Pro are not offered for this product, so the choice stays between the base plywood build and the one-quart paint option.\u003c\/p\u003e\u003ch2\u003eBuild the Blue Tile in one focused session\u003c\/h2\u003e\u003cp\u003ePlan roughly 45 to 60 minutes with a drill. The included pre-cut parts and counted galvanized hardware allow the builder to follow the photo instructions rather than create a parts list from scratch. Keep the graphic panels protected while unpacking and complete the build on a level foundation.\u003c\/p\u003e\u003ch2\u003eLeave the tile ramp room to be ridden\u003c\/h2\u003e\u003cp\u003eThis is a stand-alone quarter pipe, so its best companion is open approach space. Put it where a rider can return to the transition from more than one direction rather than surrounding it with obstacles immediately. That leaves future additions free to add variety without taking away the purpose of the Blue Tile.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne Brad McClain Blue Tile Quarter Pipe in the selected Skate Paint configuration\u003c\/li\u003e\n\u003cli\u003eExterior-grade lumber and plywood parts\u003c\/li\u003e\n\u003cli\u003ePre-counted rust-resistant screws and required galvanized metal parts\u003c\/li\u003e\n\u003cli\u003ePre-cut and pre-drilled boards with computer-cut transition pieces\u003c\/li\u003e\n\u003cli\u003ePhoto instruction booklet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping to the contiguous U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eBrad McClain Blue Tile Quarter Pipe freight delivery\u003c\/h3\u003e\u003cp\u003eThe kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.\u003c\/p\u003e\u003ch3\u003eAssembly planning\u003c\/h3\u003e\u003cp\u003eAssembly uses a drill and takes about 45 to 60 minutes. Build on a level foundation with the required tools and follow the photo instructions.\u003c\/p\u003e\u003ch3\u003eQuestions about Brad McClain Blue Tile Quarter Pipe\u003c\/h3\u003e\u003ch4\u003eHow does the Blue Tile Quarter Pipe compare with the 4 Foot Wide Quarter Pipe Ramp?\u003c\/h4\u003e\u003cp\u003eBoth are four feet wide, but they solve different space and transition jobs. The Blue Tile is 2 feet tall, 4 feet deep, and 68 pounds, with Brad McClain artwork and an optional one-quart paint choice. The standard 4 Foot Wide ramp is 3 feet 2 inches tall, 6 feet 5 inches deep, 175 pounds, and has rear casters. Choose the geometry and mobility the site needs.\u003c\/p\u003e\u003ch4\u003eHow does the Blue Tile Quarter Pipe compare with the American Flag Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eBoth ramps are 2 feet tall and 4 feet deep. The Blue Tile is 4 feet wide, weighs 68 pounds, takes about 45 to 60 minutes to assemble, and offers one quart of Skate Paint for exposed plywood. The American Flag model is 3 feet 2 inches wide, weighs 70 pounds, takes 30 to 45 minutes, and has no separate paint choice. Choose by width, finish control, and artwork.\u003c\/p\u003e\u003ch4\u003eCan the Brad McClain Blue Tile Quarter Pipe be used outdoors?\u003c\/h4\u003e\u003cp\u003eYes. The Brad McClain Blue Tile Quarter Pipe uses materials intended for outdoor use. Build it on a level foundation, keep the approach and roll-away clear, and use the optional one quart of Skate Paint only on exposed plywood. Outdoor placement does not turn GatorSkins or Skatelite Pro into options for this model, and the Blue Tile artwork should remain uncovered.\u003c\/p\u003e\u003ch4\u003eWhat can riders practice on the Brad McClain Blue Tile Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eUse the Brad McClain Blue Tile Quarter Pipe for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Brad McClain Blue Tile Quarter Pipe if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/quarter-pipes\"\u003eCompare Quarter Pipe Ramps\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607490576567,"sku":"Blue Tile QP","price":479.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":39607490707639,"sku":"Blue Tile QP+Quart","price":558.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/ramp6.jpg?v=1729241229"},{"product_id":"bump-to-stairs","title":"Bump to Stairs Skate Obstacle","description":"  \u003cp\u003e\u003cstrong\u003eA bump that finishes in a stair-style obstacle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBump to Stairs creates a different obstacle choice by joining a 12-inch bump to a stair-style profile in a 6-foot length. Its narrower 3-foot-2-inch width makes the product a fit for riders deciding between a compact stair target and a wider bank or ledge.\u003c\/p\u003e\u003ch2\u003eA 12-inch bump with a stair-style target\u003c\/h2\u003e\u003cp\u003eBump to Stairs starts with a 12-inch bump and carries that movement into a stair-style obstacle. It is not another plain wedge. Pick it when the session needs a compact feature with a different visual target and action than a rail or rectangular grind box.\u003c\/p\u003e\u003ch2\u003eA narrower obstacle with a six-foot length\u003c\/h2\u003e\u003cp\u003eThe Bump to Stairs measures 3 feet 2 inches wide and 6 feet long. That narrow profile helps define placement, but it does not remove the need for a clear run-in and exit. Mark the full riding path before committing to its spot.\u003c\/p\u003e\u003ch2\u003eSet aside the short build window\u003c\/h2\u003e\u003cp\u003eAssembly requires a drill and takes about 45 to 60 minutes. Keep the bump, stair section, and coping parts organized, complete the build on level ground, and inspect the finished obstacle before riding so the first session starts with a stable stair-style target.\u003c\/p\u003e\u003ch2\u003eSeparate plywood care from metal details\u003c\/h2\u003e\u003cp\u003eOne quart of Skate Paint is specified for the Bump to Stairs' exposed plywood. The coating is a wood-care decision. Keep it separate from the galvanized coping and stair-specific construction so each material receives the right attention during setup and later maintenance.\u003c\/p\u003e\u003ch2\u003eChoose which stair receives the coping\u003c\/h2\u003e\u003cp\u003eThe kit includes one galvanized-metal coping piece that can mount on either stair. Decide that position before the build is finished, based on the approach the rider will actually use. The choice does not create two coping edges, but it does let one compact stair obstacle favor the route that makes the most sense in the available space.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne wedge bump ramp\u003c\/li\u003e\n\u003cli\u003eOne two-stair set\u003c\/li\u003e\n\u003cli\u003eOne galvanized-metal coping piece that mounts on either stair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAssembly details\u003c\/h3\u003e\u003cp\u003eFor Bump to Stairs Skate Obstacle, assembly is estimated at 45-60 minutes and the tools are drill. Follow the product instructions for the exact kit.\u003c\/p\u003e\u003ch3\u003eQuestions about Bump to Stairs Skate Obstacle\u003c\/h3\u003e\u003ch4\u003eHow does the Bump to Stairs Skate Obstacle differ from a basic Wedge Bump?\u003c\/h4\u003e\u003cp\u003eBump to Stairs carries the launch into a two-stair target with a coping choice. A Wedge Bump stays focused on the takeoff. Choose the stair version when the step feature will add meaningful practice instead of buying more complexity that the rider will avoid.\u003c\/p\u003e\u003ch4\u003eIs Bump to Stairs intended to replace a full street stair set?\u003c\/h4\u003e\u003cp\u003eNo. It is a focused six-foot obstacle built around a wedge bump and two-stair section. It brings stair-style practice into a controlled setup without claiming to reproduce every street condition. Judge the product by that compact role and the route available around it.\u003c\/p\u003e\u003ch4\u003eWhen should I compare Bump to Stairs with Bump to Rail?\u003c\/h4\u003e\u003cp\u003eCompare them when the rider wants a connected technical target after the bump. Bump to Stairs emphasizes a two-step shape and movable coping position; Bump to Rail emphasizes a raised red rail. Choose the obstacle the rider will actually use in repeated sessions.\u003c\/p\u003e\u003ch4\u003eHow can riders use the Bump to Stairs Skate Obstacle?\u003c\/h4\u003e\u003cp\u003eUse the Bump to Stairs Skate Obstacle as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Bump to Stairs Skate Obstacle if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003elaunch ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39490402582711,"sku":"creager","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/two_stairs.jpg?v=1729241229"},{"product_id":"bump-to-rail","title":"Bump to Rail Skate Obstacle","description":"  \u003cp\u003e\u003cstrong\u003eA bump and red rail in one connected obstacle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBump to Rail combines a 12-inch bump with a 17-inch rail in a 4-by-8-foot footprint. The rail comes in red, making this a choice for riders who want a single connected launch-and-rail feature rather than two separate obstacles competing for space.\u003c\/p\u003e\u003ch2\u003eA bump that leads into a rail decision\u003c\/h2\u003e\u003cp\u003eBump to Rail pairs a 12-inch bump with a rail measuring 17 inches high. The two elements are connected in one obstacle, so the product suits a rider who wants a launch-and-rail relationship rather than a separate wedge and flat bar.\u003c\/p\u003e\u003ch2\u003eUse the four-by-eight footprint honestly\u003c\/h2\u003e\u003cp\u003eThe Bump to Rail is 4 feet wide and 8 feet long. It needs clear pavement for the approach and roll-away beyond those dimensions, especially because the rider is moving through both the bump and rail section. Map the whole sequence before placing it.\u003c\/p\u003e\u003ch2\u003eA red rail defines the visible finish\u003c\/h2\u003e\u003cp\u003eThe Bump to Rail has a red rail. That finish is part of the obstacle's identity, not an indication of a broad color program. Choose the product when the connected shape and red rail fit the intended setup, including the visual balance of the surrounding obstacles.\u003c\/p\u003e\u003ch2\u003ePlan the assembly\u003c\/h2\u003e\u003cp\u003eThe Bump to Rail calls for a drill and has an estimated one-to-two-hour assembly window. That is a practical build commitment for a connected bump-and-rail obstacle. Organize the parts, follow the instructions, and inspect the completed feature on stable pavement.\u003c\/p\u003e\u003ch2\u003eCoat the wood, not the red rail\u003c\/h2\u003e\u003cp\u003eOne quart of Skate Paint is specified for the Bump to Rail's exposed plywood. The paint belongs to the ramp portion of the obstacle. It is separate from the red rail, which remains a distinct visual and functional part of the build.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne Bump to Rail kit combining a 12-inch wooden bump and 17-inch red rail\u003c\/li\u003e\n\u003cli\u003eOne quart of Skate Paint only when selected\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAssembly details\u003c\/h3\u003e\u003cp\u003eBump to Rail has an estimated one-to-two-hour assembly window and requires a drill. Build the connected bump and red rail carefully, then check their finished relationship before opening the riding lane.\u003c\/p\u003e\u003ch3\u003eQuestions about Bump to Rail Skate Obstacle\u003c\/h3\u003e\u003ch4\u003eHow does the Bump to Rail Skate Obstacle compare with the Triangle Apple Rail?\u003c\/h4\u003e\u003cp\u003eBump to Rail fixes a 12-inch bump to a raised red rail, creating one repeatable launch-to-rail relationship. Triangle Apple wraps galvanized coping around a low plywood triangle. Compare the movement the rider wants to repeat: a connected takeoff into a rail, or a wider shaped body that blends rail and bank character.\u003c\/p\u003e\u003ch4\u003eHow should rider experience affect the Bump to Rail Skate Obstacle decision?\u003c\/h4\u003e\u003cp\u003eUse the connected 12-inch bump and 17-inch rail as the real reference points rather than relying on a universal skill label. The right buyer wants to progress around that combined shape and has a route where the fixed takeoff-to-rail relationship can be practiced deliberately.\u003c\/p\u003e\u003ch4\u003eShould Bump to Rail anchor a route or connect two parts of the setup?\u003c\/h4\u003e\u003cp\u003eIt can serve either role depending on the surrounding space. Use it as an anchor when the connected bump and rail are the main practice feature. Use it as a connector only when the run-in and roll-away tie cleanly into other obstacles without creating crossing traffic.\u003c\/p\u003e\u003ch4\u003eHow can riders use the Bump to Rail Skate Obstacle?\u003c\/h4\u003e\u003cp\u003eUse the Bump to Rail Skate Obstacle as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Bump to Rail Skate Obstacle if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003elaunch ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607559913655,"sku":"BumpToRail","price":599.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":39607559946423,"sku":"BumpToRail+Quart","price":678.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/thumb1.jpg?v=1729241229"},{"product_id":"cody-mcentire-s-american-bench","title":"Cody McEntire American Skate Bench","description":"  \u003cp\u003e\u003cstrong\u003eA signed bench shape with a six-foot working length\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Cody McEntire American Skate Bench is a six-foot, 14-inch-high bench-style obstacle with Butter material for slides and grinds. Its 60-pound weight and drill-based assembly make it a choice for a rider who wants a dedicated bench feature rather than another low box.\u003c\/p\u003e\u003ch2\u003eA six-foot bench made to skate\u003c\/h2\u003e\u003cp\u003eThe Cody McEntire American Skate Bench measures 14 inches high and 6 feet long. That bench proportion creates a longer working shape than a short grind box. Pick it when a familiar bench silhouette and extended slide-or-grind distance are the priority.\u003c\/p\u003e\u003ch2\u003eButter material has a working purpose\u003c\/h2\u003e\u003cp\u003eThe Cody McEntire American Skate Bench uses Butter material for its dedicated slide-and-grind surface. That material is not a decorative detail. It is part of why the bench differs from an ordinary piece of street furniture or a generic plywood platform.\u003c\/p\u003e\u003ch2\u003ePlan the 60-pound placement\u003c\/h2\u003e\u003cp\u003eThe bench weighs 60 pounds. That gives it more presence than a small portable rail, while still requiring an intentional position in the setup. Choose the location around the approach and exit instead of treating the six-foot bench as a casual movable prop.\u003c\/p\u003e\u003ch2\u003ePlan 30 to 45 minutes with a drill\u003c\/h2\u003e\u003cp\u003eThe Cody McEntire American Skate Bench calls for a drill and roughly 30 to 45 minutes of assembly. That build work belongs to this signed bench product. Set aside the time, keep the parts organized, and inspect the finished feature on stable pavement.\u003c\/p\u003e\u003ch2\u003eThe Cody McEntire treatment stays with this bench\u003c\/h2\u003e\u003cp\u003eCody McEntire's signature treatment belongs to the American Skate Bench and its bench-style form. The attribution adds character, while the 14-inch height, six-foot length, and Butter working surface explain whether the actual obstacle fits the rider's planned spot and available run-in.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Cody McEntire American Bench\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003ePlan 30-45 minutes with a drill\u003c\/h3\u003e\u003cp\u003eThe Cody McEntire American Bench arrives boxed for assembly. Set aside a drill and about 30 to 45 minutes, keep the parts together, and check the six-foot bench on level ground before skating it.\u003c\/p\u003e\u003ch3\u003eQuestions about Cody McEntire American Skate Bench\u003c\/h3\u003e\u003ch4\u003eHow does the Cody McEntire American Bench differ from a standard grind box?\u003c\/h4\u003e\u003cp\u003eThe Cody bench uses a recognizable six-foot bench profile and a Butter working surface instead of a plain rectangular box. Pick it when the bench shape and signature treatment add something useful to the spot, not when a low basic ledge would do the same job.\u003c\/p\u003e\u003ch4\u003eHow does the Cody McEntire bench compare with Jordan Hoffart's Butter Bench?\u003c\/h4\u003e\u003cp\u003eBoth are six-foot, 14-inch bench-style obstacles with dedicated Butter working surfaces. Compare their designer identity, available finish treatment, weight, and overall look. Choose the Cody bench when its American Bench design belongs in the spot, not because of an unsupported performance claim.\u003c\/p\u003e\u003ch4\u003eWhen would a compact Grind Box make more sense than the Cody bench?\u003c\/h4\u003e\u003cp\u003eChoose a compact Grind Box when storage, simpler movement, or a basic rectangular edge matters more than a full six-foot bench silhouette. Choose the Cody McEntire bench when its longer Butter surface and recognizable signature form will be used enough to earn the extra space.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the Cody McEntire American Skate Bench?\u003c\/h4\u003e\u003cp\u003eUse the Cody McEntire American Skate Bench for ledge skills such as 50-50 grinds, boardslides, noseslides, and ollies on or off the obstacle. Where the top and geometry support it, riders can also work on manuals and nose manuals.\u003c\/p\u003e\u003ch4\u003eCan I return the Cody McEntire American Skate Bench if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/grind-boxes\"\u003egrind boxes and ledges\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39490413723831,"sku":"Cody-Flag-Bench","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/cody-mccentire-american-bench.jpg?v=1729241229"},{"product_id":"greg-lutzka-s-curb-kicker","title":"Greg Lutzka Curb Kicker","description":"  \u003cp\u003e\u003cstrong\u003eA tall curb-style kicker for a dedicated target\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Greg Lutzka Curb Kicker arrives assembled and can sit against a curb or stair or work as a launch or wedge ramp. Its 36-inch height and 33-inch depth create a tall, compact signature feature for riders who want more than a small nine-inch kicker.\u003c\/p\u003e\u003ch2\u003eA 36-inch curb-kicker profile\u003c\/h2\u003e\u003cp\u003eThe Greg Lutzka Curb Kicker measures 36 inches high. That tall profile gives the product a different presence from a nine-inch kicker or low manual pad. It works best when a serious curb-style target is more useful than another small obstacle.\u003c\/p\u003e\u003ch2\u003eThirty-three inches of depth defines placement\u003c\/h2\u003e\u003cp\u003eThe Curb Kicker measures 33 inches deep. Pair that depth with the 36-inch height when choosing its position on the pavement. The product needs a clear approach and exit, because the usable riding path extends beyond the dimensions of the kicker body.\u003c\/p\u003e\u003ch2\u003eArrives assembled for immediate placement\u003c\/h2\u003e\u003cp\u003eNo assembly is required for the Greg Lutzka Curb Kicker. Set the completed feature against the chosen curb or stair, or stage it as a launch or wedge ramp, then confirm the tall body sits securely before opening the route to riders.\u003c\/p\u003e\u003ch2\u003eOutdoor-use materials support the intended setting\u003c\/h2\u003e\u003cp\u003eThe Greg Lutzka Curb Kicker uses materials designed for outdoor use. A level base and sensible care still matter for a tall obstacle that may meet a curb or stair. Exterior material fit supports the intended setting without removing the need to plan a secure position.\u003c\/p\u003e\u003ch2\u003eUse one obstacle in three distinct ways\u003c\/h2\u003e\u003cp\u003eThe Curb Kicker can meet a curb, meet a stair, or stand on its own as a launch or wedge. That range gives the signature obstacle more than one role without changing its 36-inch height or 33-inch depth, making placement the creative decision after purchase.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Greg Lutzka Curb Kicker\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eNo assembly required\u003c\/h3\u003e\u003cp\u003eThe Greg Lutzka Curb Kicker arrives assembled. Place it against a curb or stair, or use it as a launch or wedge ramp, then confirm the 36-inch-high feature rests securely before skating.\u003c\/p\u003e\u003ch3\u003eQuestions about Greg Lutzka Curb Kicker\u003c\/h3\u003e\u003ch4\u003eHow does the Greg Lutzka Curb Kicker compare with Launch WR?\u003c\/h4\u003e\u003cp\u003eThe Curb Kicker is a tall, assembled signature feature that can meet a curb or stair or work as a launch. Launch WR is a smaller kit with separate launch and wallie faces. Choose the Curb Kicker for scale and multi-role placement; choose Launch WR for a compact two-face obstacle.\u003c\/p\u003e\u003ch4\u003eHow does the Curb Kicker differ from the smaller GB Kicker?\u003c\/h4\u003e\u003cp\u003eThe Greg Lutzka Curb Kicker is a tall signature feature that can meet curbs or stairs or stand alone as a launch. The GB Kicker is a compact nine-inch ramp designed around a Grind Box connection. They solve very different scale and route decisions.\u003c\/p\u003e\u003ch4\u003eWhen should I compare the Curb Kicker with a Wedge Bump or Bank Ramp?\u003c\/h4\u003e\u003cp\u003eCompare all three when the site needs a launch but the correct scale is unclear. The Curb Kicker offers a tall multi-role target, the Wedge Bump provides a compact connector, and the Bank supplies a broad dedicated face. Let the intended route choose the format.\u003c\/p\u003e\u003ch4\u003eHow can riders use the Greg Lutzka Curb Kicker?\u003c\/h4\u003e\u003cp\u003eUse the Greg Lutzka Curb Kicker as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Greg Lutzka Curb Kicker if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003elaunch ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39490423718071,"sku":"lutzka","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/CurbKicker6.jpg?v=1729241246"},{"product_id":"greg-lutzka-s-brick-box","title":"Greg Lutzka Brick Grind Box","description":"  \u003cp\u003e\u003cstrong\u003eA six-foot brick profile with a coping choice\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Greg Lutzka Brick Grind Box is a 12-inch-high, six-foot-long ledge with one- or two-coping-edge configurations. Its outdoor-use materials and brick-style form make it a choice for riders who want a long grind box with a more distinctive shape and edge decision.\u003c\/p\u003e\u003ch2\u003eA brick profile with a 12-inch height\u003c\/h2\u003e\u003cp\u003eThe Greg Lutzka Brick Grind Box measures 12 inches high. That height and brick-style shape create a different visual and working profile from a low manual pad. Pick it when a full ledge height and an unmistakable brick form are both part of the spot plan.\u003c\/p\u003e\u003ch2\u003eSix feet of working length\u003c\/h2\u003e\u003cp\u003eThe Greg Lutzka Brick Grind Box is 6 feet long, giving it more room than a compact four-foot ledge. Its length should be placed with a clear approach and exit on the actual pavement. A six-foot feature needs a route, not just an empty rectangle.\u003c\/p\u003e\u003ch2\u003eOne or two coping edges is a real choice\u003c\/h2\u003e\u003cp\u003eThe Brick Grind Box has configurations with one coping edge or two coping edges. That option changes the working surfaces available on the same six-foot body. Choose the edge configuration for the way the ledge will sit in the spot, not as a generic upgrade.\u003c\/p\u003e\u003ch2\u003eOutdoor materials fit a durable exterior setup\u003c\/h2\u003e\u003cp\u003eThe Greg Lutzka Brick Grind Box uses materials designed for outdoor use. Give the six-foot ledge a stable position and normal care so the selected coping edge or edges stay accessible. Exterior material fit supports an outdoor spot without making every uneven or exposed location suitable.\u003c\/p\u003e\u003ch2\u003eGreg Lutzka's treatment stays tied to this box\u003c\/h2\u003e\u003cp\u003eGreg Lutzka's signature treatment belongs to the Brick Grind Box and its brick-style form. The attribution gives the product character, but the 12-inch height, six-foot length, and coping configuration decide whether this particular ledge belongs in the planned session and fits the available pavement.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Greg Lutzka Brick Box in the selected coping configuration\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eArrives assembled\u003c\/h3\u003e\u003cp\u003eThe Greg Lutzka Brick Box needs no assembly. Choose a level location for the six-foot box, preserve an open route along the selected coping edge or edges, and place the finished obstacle before the session begins.\u003c\/p\u003e\u003ch3\u003eQuestions about Greg Lutzka Brick Grind Box\u003c\/h3\u003e\u003ch4\u003eHow should I choose between one coping edge and two?\u003c\/h4\u003e\u003cp\u003eChoose one coping edge when the ledge will have a primary working side. Choose two when the placement can keep both long sides open and riders will use that access. The second edge adds value only when the surrounding route makes it usable.\u003c\/p\u003e\u003ch4\u003eHow does the Brick Box differ from a standard Grind Box?\u003c\/h4\u003e\u003cp\u003eThe Greg Lutzka Brick Box combines a brick-style signature form with a selectable coping-edge count. A standard Grind Box offers a simpler low ledge in several lengths. Choose the Brick Box when its design and edge choice add value beyond the basic rectangular format.\u003c\/p\u003e\u003ch4\u003eWhen should I compare the Brick Box with a skate bench?\u003c\/h4\u003e\u003cp\u003eCompare them when the rider wants a six-foot working feature but has not chosen the body shape. The Brick Box presents a substantial ledge with a coping decision, while an American or Butter Bench brings a familiar furniture form and dedicated Butter surface.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the Greg Lutzka Brick Grind Box?\u003c\/h4\u003e\u003cp\u003eUse the Greg Lutzka Brick Grind Box for ledge skills such as 50-50 grinds, boardslides, noseslides, and ollies on or off the obstacle. Where the top and geometry support it, riders can also work on manuals and nose manuals.\u003c\/p\u003e\u003ch4\u003eCan I return the Greg Lutzka Brick Grind Box if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/grind-boxes\"\u003egrind boxes and ledges\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"1 coping edge","offer_id":39607609360567,"sku":"BrickBox","price":539.1,"currency_code":"USD","in_stock":false},{"title":"2 coping edge","offer_id":39607609393335,"sku":"BrickBox_2_copings","price":565.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/brick-box2.jpg?v=1729241246"},{"product_id":"jordan-hoffart-s-butter-bench","title":"Jordan Hoffart Butter Skate Bench","description":"  \u003cp\u003e\u003cstrong\u003eA signed Butter bench with six feet of working length\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJordan Hoffart's Butter Skate Bench is a 14-inch-high, six-foot obstacle with a dedicated Butter working surface. It weighs 69 pounds, comes in Black\/Grey or Brown\/Tan, and uses a drill-based build for riders who want a signature bench rather than another plain ledge.\u003c\/p\u003e\u003ch2\u003eA six-foot bench with a 14-inch profile\u003c\/h2\u003e\u003cp\u003eJordan Hoffart's Butter Skate Bench measures 14 inches high and 6 feet long. Those dimensions create a full bench-style obstacle as opposed to a short grind box. The right fit is a setup where the session benefits from a familiar bench shape with a longer working surface.\u003c\/p\u003e\u003ch2\u003eButter material supports the working surface\u003c\/h2\u003e\u003cp\u003eThe Butter Skate Bench uses Butter material for its slide-and-grind surface. That material has a functional job on this bench, not a decorative one. It helps distinguish the product from ordinary furniture and from a plain plywood ledge with no dedicated working surface.\u003c\/p\u003e\u003ch2\u003eA 69-pound bench needs a settled spot\u003c\/h2\u003e\u003cp\u003eThe Jordan Hoffart Butter Skate Bench weighs 69 pounds. That is substantial enough to make placement a real decision. Choose a stable location with a clear approach and exit instead of expecting the six-foot bench to move casually after every session.\u003c\/p\u003e\u003ch2\u003eReserve 30 to 45 minutes for the build\u003c\/h2\u003e\u003cp\u003eAssembly requires a drill and takes about 30 to 45 minutes. That work is specific to the signed bench. Keep the parts organized, follow the supplied build sequence, and check the finished Butter Skate Bench on level pavement before it is used.\u003c\/p\u003e\u003ch2\u003eJordan Hoffart's treatment belongs to this bench\u003c\/h2\u003e\u003cp\u003eJordan Hoffart designed the Butter Bench around a skateable bench form. The signature detail gives it identity, while the six-foot length, 14-inch height, and Butter surface explain the practical reason it may fit a rider's setup better than another ledge.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Jordan Hoffart Butter Bench in the selected color\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003ePlan 30-45 minutes with a drill\u003c\/h3\u003e\u003cp\u003eThe Jordan Hoffart Butter Bench arrives as a kit and needs a drill plus about 30 to 45 minutes of assembly. Build it on stable ground, then check the six-foot bench before skating.\u003c\/p\u003e\u003ch3\u003eQuestions about Jordan Hoffart Butter Skate Bench\u003c\/h3\u003e\u003ch4\u003eHow does the Jordan Hoffart Butter Skate Bench compare with the Skateboard Picnic Bench?\u003c\/h4\u003e\u003cp\u003eThe Jordan Hoffart bench uses a straighter six-foot signature form with selectable color treatments, while the Picnic Bench emphasizes a familiar table-and-seat silhouette. Both use Butter working surfaces. Choose the body shape that adds the more useful target to the existing obstacle mix.\u003c\/p\u003e\u003ch4\u003eHow does the Jordan Hoffart bench compare with the Cody McEntire bench?\u003c\/h4\u003e\u003cp\u003eBoth are six-foot, 14-inch bench-style obstacles with dedicated Butter working surfaces. They differ in designer identity, finish choices, and weight. Compare the appearance and configuration that fit the site, then choose the bench that adds the more useful shape and character to the existing obstacle mix.\u003c\/p\u003e\u003ch4\u003eWhen is a basic Grind Box a better choice than the Butter Bench?\u003c\/h4\u003e\u003cp\u003eChoose a Grind Box when a lower rectangular ledge, selectable length, or easier placement matters more than a full bench silhouette. Choose the Jordan Hoffart Butter Bench when riders will use its six-foot Butter surface and the signature bench form earns the added space and build commitment.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the Jordan Hoffart Butter Skate Bench?\u003c\/h4\u003e\u003cp\u003eUse the Jordan Hoffart Butter Skate Bench for ledge skills such as 50-50 grinds, boardslides, noseslides, and ollies on or off the obstacle. Where the top and geometry support it, riders can also work on manuals and nose manuals.\u003c\/p\u003e\u003ch4\u003eCan I return the Jordan Hoffart Butter Skate Bench if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/grind-boxes\"\u003egrind boxes and ledges\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Black\/Grey","offer_id":39607690395831,"sku":"JHbutterbench_blackgrey","price":439.0,"currency_code":"USD","in_stock":true},{"title":"Brown\/Tan","offer_id":39607690428599,"sku":"JHbutterbench_brown_tan","price":439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/hoff_bench-1.jpg?v=1729241248"},{"product_id":"huf-shoe-box-skate-ledge","title":"HUF Shoe Box Skate Ledge","description":"  \u003cp\u003e\u003cstrong\u003eA HUF shoe shape with two full coping sides\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe HUF Shoe Box Skate Ledge brings a life-size shoe profile to a 15.5-inch-high, four-foot-wide, eight-foot-long ledge. Rust-free coping runs along both long sides, making it a serious double-sided obstacle for riders who want a recognizable HUF form rather than a generic box.\u003c\/p\u003e\u003ch2\u003eA HUF shoe form at full ledge size\u003c\/h2\u003e\u003cp\u003eThe HUF Shoe Box Skate Ledge uses a life-size shoe silhouette instead of a plain rectangular box. Its 15.5-inch height gives that recognizable form real obstacle scale. It earns its place when the setup calls for a street-style object with substantial ledge dimensions, not just a graphic detail.\u003c\/p\u003e\u003ch2\u003eBoth eight-foot sides carry coping\u003c\/h2\u003e\u003cp\u003eRust-free coping runs the full eight-foot length of both sides of the HUF Shoe Box Skate Ledge. That double-sided construction gives the product two long working edges. It should be compared with a single-edge ledge based on usable surfaces, not only its HUF identity.\u003c\/p\u003e\u003ch2\u003eFour feet wide needs an open position\u003c\/h2\u003e\u003cp\u003eThe HUF Shoe Box Skate Ledge measures 4 feet wide and 8 feet long. Those figures describe a large shoe-shaped body. Leave open pavement along both coping sides so riders are not forced to approach the obstacle through a congested path.\u003c\/p\u003e\u003ch2\u003eOutdoor materials belong in an exterior plan\u003c\/h2\u003e\u003cp\u003eThe HUF Shoe Box Skate Ledge uses materials designed for outdoor use. Keep its large body on a stable base and give both coping sides enough open pavement. Exterior material fit supports an outdoor spot without making an uneven, crowded, or neglected placement work.\u003c\/p\u003e\u003ch2\u003eA finished signature ledge on day one\u003c\/h2\u003e\u003cp\u003eThe HUF Shoe Box arrives ready to skate, avoiding a separate assembly session for a large branded obstacle. The buyer can focus on a level final position that leaves both coping sides open, which is useful when the goal is a complete street-style centerpiece as opposed to another build project.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne HUF Shoe Box Skate Ledge\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eArrives ready to skate\u003c\/h3\u003e\u003cp\u003eThe HUF Shoe Box Skate Ledge arrives without an assembly step. Reserve level space for the four-by-eight-foot obstacle and keep both long coping sides open before moving it into position.\u003c\/p\u003e\u003ch3\u003eQuestions about HUF Shoe Box Skate Ledge\u003c\/h3\u003e\u003ch4\u003eHow does the HUF Shoe Box compare with the éS Shoe Box Ledge?\u003c\/h4\u003e\u003cp\u003eHUF and éS use the same working dimensions and double-sided coping layout, so neither gains space through a smaller body. Let the HUF identity and shoe appearance lead only after confirming that the site can support a 15.5-inch-high, four-by-eight-foot ledge with both long sides open.\u003c\/p\u003e\u003ch4\u003eWhy choose the HUF shoe shape instead of a plain Grind Box?\u003c\/h4\u003e\u003cp\u003eThe HUF silhouette gives the setup recognizable streetwear character while the two coping sides provide the working edges. A Grind Box offers a simpler rectangular body and multiple lengths. Choose the shoe form when the visual identity improves the spot enough to justify its scale.\u003c\/p\u003e\u003ch4\u003eWhen is a one-edge ledge a better fit than the HUF Shoe Box?\u003c\/h4\u003e\u003cp\u003eChoose a one-edge ledge when the site cannot preserve routes along both long sides or needs a narrower body. Choose the HUF Shoe Box when riders will use both coping edges and the large branded silhouette adds enough character to justify its footprint.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the HUF Shoe Box Skate Ledge?\u003c\/h4\u003e\u003cp\u003eUse the HUF Shoe Box Skate Ledge for ledge skills such as 50-50 grinds, boardslides, noseslides, and ollies on or off the obstacle. Where the top and geometry support it, riders can also work on manuals and nose manuals.\u003c\/p\u003e\u003ch4\u003eCan I return the HUF Shoe Box Skate Ledge if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/grind-boxes\"\u003egrind boxes and ledges\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39490441085111,"sku":"HufBox","price":789.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/huf-box.jpg?v=1729241247"},{"product_id":"jordan-hoffart-s-speed-bump","title":"Jordan Hoffart Speed Bump Ramp","description":"  \u003cp\u003e\u003cstrong\u003eA wide eight-foot bump with a signed profile\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Jordan Hoffart Speed Bump Ramp is a 14-inch-high, four-foot-wide, eight-foot-long launch obstacle weighing 67 pounds. Its drill-based assembly, one-quart Skate Paint requirement, and outdoor-use materials make it a choice for a rider planning a wide, long bump instead of a small kicker.\u003c\/p\u003e\u003ch2\u003eA 14-inch bump with an eight-foot length\u003c\/h2\u003e\u003cp\u003eThe Jordan Hoffart Speed Bump Ramp measures 14 inches high and 8 feet long. That length makes it a larger bump decision than a compact four-foot kicker. It works best when a long, wide launch surface belongs in the plan for the available pavement.\u003c\/p\u003e\u003ch2\u003eFour feet wide changes its placement\u003c\/h2\u003e\u003cp\u003eThe Speed Bump Ramp measures 4 feet wide. Combined with the eight-foot length, that creates a substantial obstacle footprint. Lay out clear pavement before and after the bump so the four-foot width does not become a bottleneck in the rest of the setup.\u003c\/p\u003e\u003ch2\u003eA 67-pound ramp deserves a stable location\u003c\/h2\u003e\u003cp\u003eAt 67 pounds, the Jordan Hoffart Speed Bump Ramp has enough weight to favor a settled placement. It can be moved with planning, but the product earns its place as a wide, long bump. Choose the location around the full riding path.\u003c\/p\u003e\u003ch2\u003ePlan a drill and 30-to-45-minute build\u003c\/h2\u003e\u003cp\u003eThe Jordan Hoffart Speed Bump Ramp calls for a drill and roughly 30 to 45 minutes of assembly. That window belongs to this eight-foot obstacle. Organize the build, finish it on level ground, and inspect the ramp before beginning a session.\u003c\/p\u003e\u003ch2\u003eOne quart addresses the exposed plywood\u003c\/h2\u003e\u003cp\u003eThe Speed Bump Ramp specifies one quart of Skate Paint for its exposed plywood. That amount is tied to this product's outdoor-use materials and should be planned as a wood-care task. It is separate from the decision to choose a wide, signed bump profile.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne Jordan Hoffart Speed Bump Ramp kit\u003c\/li\u003e\n\u003cli\u003eOne quart of Skate Paint only when selected\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAssembly details\u003c\/h3\u003e\u003cp\u003eFor Jordan Hoffart Speed Bump Ramp, assembly is estimated at 30-45 minutes and the tools are drill. Follow the product instructions for the exact kit.\u003c\/p\u003e\u003ch3\u003eQuestions about Jordan Hoffart Speed Bump Ramp\u003c\/h3\u003e\u003ch4\u003eHow does the Jordan Hoffart Speed Bump differ from the compact Wedge Bump?\u003c\/h4\u003e\u003cp\u003eThe Speed Bump is a broader eight-foot obstacle standing 14 inches high and four feet wide. The Wedge Bump is a four-foot connector standing 12 inches high. Choose the Speed Bump when a larger signature transition is the desired feature, not simply a small launch.\u003c\/p\u003e\u003ch4\u003eHow does the Speed Bump compare with the Bank Skateboard Ramp?\u003c\/h4\u003e\u003cp\u003eThe Speed Bump is a lower, two-sided-style bump that can sit within a route, while the Bank is a much larger inclined face intended as a substantial feature. Choose the Speed Bump for flow through the setup and the Bank when a broad face should anchor it.\u003c\/p\u003e\u003ch4\u003eWho should consider the Speed Bump instead of a two-sided spine?\u003c\/h4\u003e\u003cp\u003eChoose the Speed Bump for a broad bump profile approached as one continuous feature. Choose a Micro Spine or Quarter Pipe Spine when two transition faces and direction changes are the main job. The products may occupy similar planning conversations, but they create different riding shapes.\u003c\/p\u003e\u003ch4\u003eHow can riders use the Jordan Hoffart Speed Bump Ramp?\u003c\/h4\u003e\u003cp\u003eUse the Jordan Hoffart Speed Bump Ramp as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Jordan Hoffart Speed Bump Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003elaunch ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607699046583,"sku":"SpeedBump","price":379.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":39607699079351,"sku":"SpeedBump+Quart","price":458.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/speed_bump22-1.jpg?v=1729241246"},{"product_id":"double-step-ledge","title":"Double Step Skate Ledge","description":"  \u003cp\u003e\u003cstrong\u003eTwo ledge heights in one six-foot obstacle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Double Step Skate Ledge combines a 6.5-inch first step and a 12-inch second step in a six-foot-long, 2.5-foot-wide body. It gives a rider two distinct ledge heights without having to choose between separate low and higher boxes for the same spot.\u003c\/p\u003e\u003ch2\u003eTwo heights make the Double Step different\u003c\/h2\u003e\u003cp\u003eThe Double Step Skate Ledge has a 6.5-inch first step and a 12-inch second step. Those two working heights are the product's central decision. It earns its place when the setup benefits from a low and higher ledge target in one connected six-foot obstacle.\u003c\/p\u003e\u003ch2\u003eA six-foot length with a 2.5-foot width\u003c\/h2\u003e\u003cp\u003eThe Double Step Skate Ledge measures 6 feet long and 2.5 feet wide. That gives the product a meaningful rectangular footprint. Add clear pavement for the approach and exit so the stepped shape can be used without forcing riders into a cramped path.\u003c\/p\u003e\u003ch2\u003eBuild both ledge heights in one session\u003c\/h2\u003e\u003cp\u003eAssembly requires a drill and about 30 to 45 minutes. Keep the 6.5-inch and 12-inch step sections organized, follow the photo instructions, and check that the complete six-foot ledge rests level so both working heights are ready at the same time.\u003c\/p\u003e\u003ch2\u003eOne quart protects its exposed plywood\u003c\/h2\u003e\u003cp\u003eThe Double Step Skate Ledge specifies one quart of Skate Paint for the exposed plywood. That amount belongs to this six-foot stepped obstacle. Plan the paint as a wood-care task and keep it separate from the decision about the two riding heights.\u003c\/p\u003e\u003ch2\u003eOutdoor materials fit the intended setting\u003c\/h2\u003e\u003cp\u003eThe Double Step Skate Ledge uses materials designed for outdoor use, making it suitable for an exterior spot. A stable, level placement, drainage awareness, and routine care remain important around both working heights. Outdoor-ready materials support the intended setting but cannot make uneven or crowded pavement work.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne Double Step Skate Ledge kit with 6.5-inch and 12-inch step heights\u003c\/li\u003e\n\u003cli\u003eOne quart of Skate Paint only when selected\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eBuild the two steps with a drill\u003c\/h3\u003e\u003cp\u003eThe Double Step Ledge needs a drill and about 30 to 45 minutes of assembly. Keep the 6.5-inch and 12-inch step sections organized, then check that the completed six-foot ledge rests level.\u003c\/p\u003e\u003ch3\u003eQuestions about Double Step Skate Ledge\u003c\/h3\u003e\u003ch4\u003eHow does the Double Step Ledge differ from stacking two separate boxes?\u003c\/h4\u003e\u003cp\u003eIts 6.5-inch and 12-inch steps are connected in one six-foot obstacle, so the relationship between the two levels stays consistent. Separate boxes offer more rearrangement. Choose the Double Step when two fixed heights in one compact ledge are more valuable than modular placement.\u003c\/p\u003e\u003ch4\u003eWho should compare the Double Step with the Crescent Ledge?\u003c\/h4\u003e\u003cp\u003eBoth provide more than one working height, but they do it differently. The Double Step creates two defined levels; the Crescent moves between a 9-inch low end and 14-inch high end along a curve. Compare the kind of edge the rider wants, not just length.\u003c\/p\u003e\u003ch4\u003eHow does the Double Step Skate Ledge compare with the Skateboard Manny Pad?\u003c\/h4\u003e\u003cp\u003eThe Double Step is a standalone six-foot kit with 6.5-inch and 12-inch ledge levels. The Manny Pad is a lower eight-foot platform with coping on both sides and is available only with a qualifying large-ramp order. Choose Double Step for built-in height variety; choose the Manny Pad when its low platform and purchase path fit the project.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the Double Step Skate Ledge?\u003c\/h4\u003e\u003cp\u003eUse the Double Step Skate Ledge for ledge skills such as 50-50 grinds, boardslides, noseslides, and ollies on or off the obstacle. Where the top and geometry support it, riders can also work on manuals and nose manuals.\u003c\/p\u003e\u003ch4\u003eCan I return the Double Step Skate Ledge if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/grind-boxes\"\u003egrind boxes and ledges\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607618011319,"sku":"DoubleStepLedge","price":499.0,"currency_code":"USD","in_stock":false},{"title":"1 Quart","offer_id":39607618044087,"sku":"DoubleStepLedge+Quart","price":578.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/double-step2.jpg?v=1729241247"},{"product_id":"ryan-decenzo-s-24k-gold-rail","title":"Ryan Decenzo 24k Gold Skate Rail","description":"  \u003cp\u003e\u003cstrong\u003eAn adjustable gold rail that splits for travel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Ryan Decenzo 24K Gold Skate Rail is an eight-foot rail that adjusts from 12 to 17 inches high and separates into two four-foot pieces. Its 52-pound weight, short assembly estimate, outdoor-use materials, and one gold-finish configuration make it a rail-first choice with a specific visual identity.\u003c\/p\u003e\u003ch2\u003eSet the rail from 12 to 17 inches\u003c\/h2\u003e\u003cp\u003eThe Ryan Decenzo 24K Gold Skate Rail adjusts from 12 to 17 inches high. That range makes height a real setup decision. Choose the setting that suits the rider and the surrounding obstacles while keeping the same eight-foot rail as the working feature.\u003c\/p\u003e\u003ch2\u003eEight feet separates into two four-foot pieces\u003c\/h2\u003e\u003cp\u003eThe Ryan Decenzo rail is 8 feet long and cuts in half at 4 feet. That separation changes travel and storage without changing the full stated rail length. It is useful for a rider who needs an eight-foot session rail that can be transported in shorter pieces.\u003c\/p\u003e\u003ch2\u003eA 52-pound rail needs deliberate placement\u003c\/h2\u003e\u003cp\u003eAt 52 pounds, the Ryan Decenzo 24K Gold Skate Rail is substantial enough to favor a settled position during use. The split design aids travel, but the rail should still sit securely on level pavement with a clear straight approach and exit.\u003c\/p\u003e\u003ch2\u003eThree to five minutes for assembly\u003c\/h2\u003e\u003cp\u003eAssembly takes about three to five minutes, and the rail comes apart for travel. That supports a mobile rail routine without changing the need for a stable final setup. Join the two four-foot sections carefully, choose the height, then check the connection and straight approach before riding.\u003c\/p\u003e\u003ch2\u003eThe 24K name means a gold-colored finish\u003c\/h2\u003e\u003cp\u003eThe Ryan Decenzo 24K Gold name refers to the rail's gold-colored finish, not real gold. The rail comes in one configuration. Pick it when that finish and an adjustable eight-foot rail fit the intended setup, instead of expecting selectable materials or colors.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Ryan Decenzo 24K Gold Rail\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eThree to five minutes for rail setup\u003c\/h3\u003e\u003cp\u003eThe Ryan Decenzo 24K Gold Rail takes about three to five minutes to assemble. Join the two four-foot sections into the full eight-foot rail, choose a height from 12 to 17 inches, and check the connection before riding.\u003c\/p\u003e\u003ch3\u003eQuestions about Ryan Decenzo 24K Gold Skate Rail\u003c\/h3\u003e\u003ch4\u003eCan the two four-foot sections of the Ryan Decenzo 24K Gold Rail be ridden as separate rails?\u003c\/h4\u003e\u003cp\u003eNo. The eight-foot rail separates into two four-foot pieces for travel and storage, but those pieces are not presented as two independent riding configurations. Assemble and secure the complete rail for use; the travel joint is not proof that either half is a standalone rail.\u003c\/p\u003e\u003ch4\u003eHow does this rail compare with the Green Monster Flat Rail?\u003c\/h4\u003e\u003cp\u003eBoth are adjustable flat rails, but Ryan Decenzo's rail adjusts from 12 to 17 inches and splits into two four-foot pieces. Green Monster adjusts from 11 to 14 inches and is lighter. Compare desired height range, travel routine, and visual finish.\u003c\/p\u003e\u003ch4\u003eHow does the 24K Gold Rail compare with the Glow in the Dark Round Rail?\u003c\/h4\u003e\u003cp\u003eRyan Decenzo's rail uses a flat profile, reaches a higher adjustment range, and separates for travel. The Glow rail uses a round profile and is lighter. Compare the working surface and handling routine first, then let the distinctive finish break a close tie.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the Ryan Decenzo 24K Gold Skate Rail?\u003c\/h4\u003e\u003cp\u003eUse the Ryan Decenzo 24K Gold Skate Rail for rail tricks such as boardslides and 50-50 grinds, then progress to more technical slides and grinds as control improves. Keep a straight, clear approach and exit that match the rail's height and length.\u003c\/p\u003e\u003ch4\u003eCan I return the Ryan Decenzo 24K Gold Skate Rail if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/skate-rails\"\u003eskate rails\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39490451734711,"sku":"24kGoldRail","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/decenzo_rail1.jpg?v=1729241246"},{"product_id":"grl-combo","title":"GRL Combo Skate Obstacle","description":"  \u003cp\u003e\u003cstrong\u003eThree ways to skate one compact combo\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGRL stands for Grind Box, Rail, and Launch Ramp. The combo brings all three into one product so riders can work on ledge, rail, and launch tricks without buying each feature separately. Approach the box, rail, or launch section based on the trick and available space, then build a line around the feature the rider wants to use next.\u003c\/p\u003e\u003ch2\u003eBuild more tricks into one setup\u003c\/h2\u003e\u003cp\u003eThe GRL Combo combines a six-foot grind box, skate rail, and launch ramp in one product. Use the box for 50-50s, slides, and manuals; the rail for boardslides and rail grinds; and the launch ramp for ollies, flip tricks, and grabs. Each feature gives the rider a different reason to keep the session moving.\u003c\/p\u003e\u003ch2\u003eChoose the approach that fits the trick\u003c\/h2\u003e\u003cp\u003eCome straight into the launch ramp, square up with the box for manuals or grinds, or take the line that creates a clean entry and exit on the rail. Each section stays part of the same GRL Combo; the rider changes the line and approach based on the trick.\u003c\/p\u003e\u003ch2\u003eProtect the plywood with Skate Paint\u003c\/h2\u003e\u003cp\u003eThe optional one quart of Skate Paint is for exposed plywood on the GRL Combo. Choose it when you want added protection for the wood, especially when the product will see outdoor conditions. GatorSkins and Skatelite Pro are not available for this product, making Skate Paint the surface-protection upgrade offered for the combo.\u003c\/p\u003e\u003ch2\u003eBuild the kit in about thirty minutes\u003c\/h2\u003e\u003cp\u003eAssembly uses the required kit hardware and takes about 30 minutes. Keep the grind box, rail, launch ramp, and hardware organized while unpacking, work on a level surface, and use the current assembly guidance for this exact kit.\u003c\/p\u003e\u003ch2\u003eTurn the GRL Combo into a full session\u003c\/h2\u003e\u003cp\u003eFocus on one feature at a time or link compatible tricks across the GRL Combo: grind or manual the box, slide or grind the rail, and use the launch for ollies, flip tricks, or grabs. The product's advantage is the number of ways it can be skated within one compact setup.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne 6-foot grind box\u003c\/li\u003e\n\u003cli\u003eOne skate rail\u003c\/li\u003e\n\u003cli\u003eOne launch ramp\u003c\/li\u003e\n\u003cli\u003eRequired kit hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping to the contiguous U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eBoxed kit delivery\u003c\/h3\u003e\u003cp\u003eThe kit arrives packaged for assembly. Keep the components together, inspect the shipment when it arrives, and report any visible damage promptly.\u003c\/p\u003e\u003ch3\u003eAssembly and setup\u003c\/h3\u003e\u003cp\u003eKeep the three components and kit hardware together and plan about 30 minutes for assembly. Build the combo on a level foundation and keep each piece organized as the layout changes.\u003c\/p\u003e\u003ch3\u003eQuestions about GRL Ramp, Rail and Grind Box Combo\u003c\/h3\u003e\u003ch4\u003eWhat tricks can I practice on the GRL Combo?\u003c\/h4\u003e\u003cp\u003eUse the grind box for 50-50s, slides, and manuals; the skate rail for boardslides and rail grinds; and the launch ramp for ollies, flip tricks, and grabs. The GRL Combo supports several kinds of sessions in one product, so riders can focus on one feature at a time or link compatible tricks into a line.\u003c\/p\u003e\u003ch4\u003eWhat comes with the GRL Combo?\u003c\/h4\u003e\u003cp\u003eThe GRL Combo includes one 6-foot grind box, one skate rail, one launch ramp, and the required kit hardware. Those three skating features are sold together as one combo.\u003c\/p\u003e\u003ch4\u003eShould I add Skate Paint to the GRL Combo?\u003c\/h4\u003e\u003cp\u003eAdd the one-quart Skate Paint option when you want protection for the exposed plywood. GatorSkins and Skatelite Pro are not available for this product, so Skate Paint is the surface-protection upgrade offered for the GRL Combo.\u003c\/p\u003e\u003ch4\u003eHow long does the GRL Combo take to assemble?\u003c\/h4\u003e\u003cp\u003ePlan about 30 minutes for assembly. Keep the grind box, rail, launch ramp, and required hardware together while unpacking, use the current assembly guidance for this exact kit, and assemble the combo on a level work area.\u003c\/p\u003e\u003ch4\u003eCan I return the GRL Ramp, Rail and Grind Box Combo if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003eExplore Skate Ramps and Obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607819567287,"sku":"GRL_combo","price":599.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":39607819600055,"sku":"GRL_combo_1Quart","price":678.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/grindbox4-1.jpg?v=1729241247"},{"product_id":"green-monster-skate-rail-6ft-flat","title":"Green Monster 6 Foot Flat Skate Rail","description":"  \u003cp\u003e\u003cstrong\u003eA six-foot flat rail with adjustable height\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Green Monster 6 Foot Flat model measures eight feet overall, with a 19-inch base and an adjustable 11-to-14-inch height range. At 25 pounds, it can come apart and move when the spot changes, then settle back into a long flat-rail session on level pavement.\u003c\/p\u003e\u003ch2\u003eAdjust the Green Monster from 11 to 14 inches\u003c\/h2\u003e\u003cp\u003eThe Green Monster 6 Foot Flat Skate Rail adjusts from 11 to 14 inches high. That height range is the key comparison point for this rail. Use it to match the rail to the rider's comfort and the other obstacles already occupying the session.\u003c\/p\u003e\u003ch2\u003ePlan from the eight-foot overall length\u003c\/h2\u003e\u003cp\u003eGreen Monster is the 6 Foot Flat model and measures eight feet overall. Use the full eight feet when mapping the spot, then leave a straight run-in and roll-away beyond the rail. Planning from the complete footprint prevents the model name from producing an undersized space.\u003c\/p\u003e\u003ch2\u003eTwenty-five pounds helps with layout changes\u003c\/h2\u003e\u003cp\u003eAt 25 pounds, the Green Monster 6 Foot Flat Skate Rail can be repositioned more easily than a large ramp. Its long profile still deserves a stable final position. Move it when the layout changes, then settle it firmly for the session.\u003c\/p\u003e\u003ch2\u003eUse the outdoor rail on level pavement\u003c\/h2\u003e\u003cp\u003eGreen Monster's materials are designed for outdoor use, supporting an exterior flat-rail setup. Level pavement, a straight riding route, and normal care still matter across the full obstacle. Outdoor-ready construction helps with the intended setting, but it does not make a crowded, uneven, or unstable position workable.\u003c\/p\u003e\u003ch2\u003eTake the rail apart between locations\u003c\/h2\u003e\u003cp\u003eGreen Monster is built to come apart and move, giving the 25-pound rail an ownership advantage when one spot is not permanent. Reconnect the pieces, choose the working height, and settle the full rail on level pavement each time as opposed to treating portability as a shortcut around setup.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Green Monster 6ft Flat Skate Rail\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eTake it apart when the spot changes\u003c\/h3\u003e\u003cp\u003eThe Green Monster is made to move and take apart. Reassemble it at the chosen 11-to-14-inch height, plan from the eight-foot overall length, and settle the 25-pound rail on level pavement before riding.\u003c\/p\u003e\u003ch3\u003eQuestions about Green Monster 6 Foot Flat Skate Rail\u003c\/h3\u003e\u003ch4\u003eDoes the Green Monster have a round-rail or fixed-height configuration?\u003c\/h4\u003e\u003cp\u003eNo. Green Monster is the flat-profile model and its verified height range adjusts from 11 to 14 inches. Buyers who want a round contact surface should compare the Glow rail, while someone who wants a fixed height should choose a different rail rather than expecting this selector-free product to change profiles.\u003c\/p\u003e\u003ch4\u003eHow does the Green Monster 6 Foot Flat Skate Rail compare with the Glow in the Dark Round Rail?\u003c\/h4\u003e\u003cp\u003eGreen Monster has a flat working profile and adjusts from 11 to 14 inches. The Glow rail is round and adjusts from 10.5 to 13.5 inches. Choose the top profile the rider wants first, then use the smaller height difference as a secondary factor.\u003c\/p\u003e\u003ch4\u003eHow does Green Monster compare with Ryan Decenzo's 24K Gold Rail?\u003c\/h4\u003e\u003cp\u003eBoth are adjustable flat rails, but Green Monster is lighter and uses a lower adjustment range, while the Ryan Decenzo rail reaches higher and splits into two four-foot sections. Compare working height, handling routine, and visual identity before choosing between them.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the Green Monster 6 Foot Flat Skate Rail?\u003c\/h4\u003e\u003cp\u003eUse the Green Monster 6 Foot Flat Skate Rail for rail tricks such as boardslides and 50-50 grinds, then progress to more technical slides and grinds as control improves. Keep a straight, clear approach and exit that match the rail's height and length.\u003c\/p\u003e\u003ch4\u003eCan I return the Green Monster 6 Foot Flat Skate Rail if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/skate-rails\"\u003eskate rails\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39490512552119,"sku":"GrnMonster","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/Green6ftFlatRail1.jpg?v=1729241248"},{"product_id":"glow-in-dark-8ft-round-rail","title":"Glow in the Dark 8 Foot Round Skate Rail","description":"  \u003cp\u003e\u003cstrong\u003eAn adjustable round rail with its own visual character\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Glow in the Dark 8 Foot Round Skate Rail measures 92 inches overall and adjusts from 10.5 to 13.5 inches high. At 30 pounds, with outdoor-use materials and its glow treatment, it gives a rail-focused setup an adjustable round profile and a finish that looks different after daylight fades.\u003c\/p\u003e\u003ch2\u003eAn adjustable rail from 10.5 to 13.5 inches\u003c\/h2\u003e\u003cp\u003eThe Glow in the Dark 8 Foot Round Skate Rail adjusts from 10.5 to 13.5 inches high. That range makes height a real part of the decision. Choose the setting that matches the rider and the surrounding obstacles instead of treating adjustment as a cosmetic feature.\u003c\/p\u003e\u003ch2\u003eNinety-two inches of round-rail length\u003c\/h2\u003e\u003cp\u003eThe Glow in the Dark rail measures 92 inches long and 19.5 inches wide. That creates an extended rail footprint with a round working surface. Reserve enough clear pavement for a straight approach and exit instead of fitting it into leftover space.\u003c\/p\u003e\u003ch2\u003eThirty pounds supports planned repositioning\u003c\/h2\u003e\u003cp\u003eAt 30 pounds, the Glow in the Dark 8 Foot model can move more readily than a heavy wood ramp, but its 92-inch overall length still calls for deliberate handling. Set the rail securely where the full round profile has room to work, then keep the surrounding route open instead of treating its weight as a reason to place it casually.\u003c\/p\u003e\u003ch2\u003eUse the outdoor rail on a stable surface\u003c\/h2\u003e\u003cp\u003eThe Glow in the Dark Round Rail materials are designed for outdoor use, which supports an exterior setup. Level pavement, a straight riding route, and normal care still matter across the 92-inch rail. Outdoor-ready construction does not make a crowded, uneven, or unstable position safe or useful.\u003c\/p\u003e\u003ch2\u003eThe glow finish gives the rail its own identity\u003c\/h2\u003e\u003cp\u003eThe glow treatment belongs to this adjustable round-rail model, not to a separate checkout option. It adds visual character after daylight fades, while the 10.5-to-13.5-inch height range and 92-inch overall length decide whether the rail truly fits the rider and site. Lead with the working profile, then let the finish break a close choice.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Glow in the Dark 8ft Round Rail\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eSet the adjustable rail on level pavement\u003c\/h3\u003e\u003cp\u003eChoose a height from 10.5 to 13.5 inches, then settle the 30-pound rail on level pavement. Its 92-inch overall length needs a straight route that stays clear of crossing traffic.\u003c\/p\u003e\u003ch3\u003eQuestions about Glow in the Dark 8 Foot Round Skate Rail\u003c\/h3\u003e\u003ch4\u003eHow should storage affect the choice between the Glow Rail and Green Monster?\u003c\/h4\u003e\u003cp\u003eThe Glow in the Dark Round Rail measures 92 inches overall and weighs 30 pounds. Green Monster weighs 25 pounds and is made to come apart for moving. Choose the working profile first, then compare whether a one-piece round rail or a take-apart flat rail fits the storage routine.\u003c\/p\u003e\u003ch4\u003eHow does the Glow in the Dark 8 Foot Round Skate Rail compare with a flat rail?\u003c\/h4\u003e\u003cp\u003eIts round working profile creates a narrower curved contact surface, while a flat rail provides a broader top. Choose the shape the rider wants to practice before considering the glow finish. The 8 Foot model measures 92 inches overall, so plan the site from that physical length.\u003c\/p\u003e\u003ch4\u003eWhen is the glow finish worth prioritizing?\u003c\/h4\u003e\u003cp\u003ePrioritize it when the rider already wants this round adjustable rail and the visual treatment adds value to the spot, photos, or evening atmosphere. Do not let the finish override the practical comparison of profile, height range, length, weight, and available riding route.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the Glow in the Dark 8 Foot Round Skate Rail?\u003c\/h4\u003e\u003cp\u003eUse the Glow in the Dark 8 Foot Round Skate Rail for rail tricks such as boardslides and 50-50 grinds, then progress to more technical slides and grinds as control improves. Keep a straight, clear approach and exit that match the rail's height and length.\u003c\/p\u003e\u003ch4\u003eCan I return the Glow in the Dark 8 Foot Round Skate Rail if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/skate-rails\"\u003eskate rails\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39490513240247,"sku":"8_glow_dark","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/8ftGlowDarkRail1.jpg?v=1729241247"},{"product_id":"quarter-pipe-ramp-3-foot-wide","title":"3 Foot Wide Quarter Pipe Ramp","description":"  \u003cp\u003e\u003cstrong\u003eA compact quarter pipe with a real coping edge\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 3 Foot Wide Quarter Pipe Ramp gives a tighter garage or backyard a proper transition without asking it to become a dedicated park. Its surface choice is simple and useful: decide whether the top should remain plywood or use Skatelite, then protect only the plywood that remains exposed.\u003c\/p\u003e\u003ch2\u003eSave room for a compact transition\u003c\/h2\u003e\u003cp\u003eThis quarter pipe is 2 feet tall, 3 feet 2 inches wide, 4 feet deep, and approximately 68 to 70 pounds. Its smaller scale helps with placement, but the approach and exit still decide whether it will be fun to skate. Mark those zones before deciding the ramp belongs in a garage or backyard corner.\u003c\/p\u003e\u003ch2\u003eChoose a small ramp with a clear job\u003c\/h2\u003e\u003cp\u003eA two-foot quarter pipe can be the regular transition in a modest home setup: somewhere to turn, reach coping, or launch into the rest of the space. It is most useful when it is not crowded by unrelated obstacles. Choose this width when a compact feature with a real approach is more valuable than a wider ramp that blocks the area.\u003c\/p\u003e\u003ch2\u003eChoose plywood or Skatelite before paint\u003c\/h2\u003e\u003cp\u003eThe top surface can be plywood or Skatelite. The one-quart Skate Paint option protects exposed plywood, so it belongs after the riding surface is chosen. Paint should not be applied over Skatelite, and GatorSkins is not an available choice for this product. Keep the surface and paint decisions separate.\u003c\/p\u003e\u003ch2\u003eFinish the short build without shortcuts\u003c\/h2\u003e\u003cp\u003ePlan about 30 to 45 minutes with a drill. The pre-cut, pre-drilled boards and photo instructions give the compact ramp a defined order of work. Build it on a level surface, keep the fasteners organized, and make the final check before the ramp becomes the setup's everyday transition.\u003c\/p\u003e\u003ch2\u003eLeave space to come back to it\u003c\/h2\u003e\u003cp\u003eThe value of this smaller quarter pipe is that it can remain easy to use. Keep its approach open, then add a rail, ledge, or another feature only if it creates a different challenge. That lets the setup grow around the ramp instead of turning the compact footprint into a traffic jam.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne 3-foot-wide quarter pipe ramp in the selected surface and Skate Paint configuration\u003c\/li\u003e\n\u003cli\u003eExterior-grade lumber and plywood parts\u003c\/li\u003e\n\u003cli\u003ePre-counted rust-resistant screws and required galvanized metal parts\u003c\/li\u003e\n\u003cli\u003ePre-cut and pre-drilled boards with computer-cut transition pieces\u003c\/li\u003e\n\u003cli\u003ePhoto instruction booklet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping to the contiguous U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eBoxed kit delivery\u003c\/h3\u003e\u003cp\u003eThe kit arrives packaged for assembly. Keep the components together, inspect the shipment when it arrives, and report any visible damage promptly.\u003c\/p\u003e\u003ch3\u003eAssembly planning\u003c\/h3\u003e\u003cp\u003eAssembly uses a drill and takes about 30 to 45 minutes. Build on a level foundation with the required tools and follow the photo instructions.\u003c\/p\u003e\u003ch3\u003eQuestions about 3 Foot Wide Quarter Pipe Ramp\u003c\/h3\u003e\u003ch4\u003eWhen should I choose one 3 Foot Wide Quarter Pipe instead of the pair?\u003c\/h4\u003e\u003cp\u003eChoose this single ramp when one compact transition gives the space the turn, coping, or launch feature it needs. The Pair of 3 Foot Quarter Pipes provides two complete transitions that can face each other, sit side by side, or serve separate approaches. Buy the pair only when the site can preserve a clear route to both ramps.\u003c\/p\u003e\u003ch4\u003eHow does the 3 Foot Wide Quarter Pipe compare with the Jack-O Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eBoth are 2 feet tall, 3 feet 2 inches wide, and 4 feet deep. The standard 3 Foot Wide Quarter Pipe weighs about 68 to 70 pounds and offers plywood or Skatelite with optional paint for exposed wood. The 70-pound Jack-O keeps its fixed seasonal graphic and has no separate Skate Paint choice. Choose surface flexibility or the graphic treatment.\u003c\/p\u003e\u003ch4\u003eHow does this model compare with the 4 Foot Wide Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eThis ramp is two feet tall, 3 feet 2 inches wide, and four feet deep. The four-foot model is taller and deeper as well as wider. Choose by the complete geometry and usable approach, not by one foot of nominal width alone.\u003c\/p\u003e\u003ch4\u003eWhat can riders practice on the 3 Foot Wide Quarter Pipe Ramp?\u003c\/h4\u003e\u003cp\u003eUse the 3 Foot Wide Quarter Pipe Ramp for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the 3 Foot Wide Quarter Pipe Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/quarter-pipes\"\u003eCompare Quarter Pipe Ramps\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None \/ Plywood","offer_id":44072604762351,"sku":"Q3","price":389.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Skatelite","offer_id":45281830699247,"sku":"Q3+Skatelite","price":539.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Plywood","offer_id":44072604795119,"sku":"Q3+QSP","price":468.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Skatelite","offer_id":45281830732015,"sku":"Q3+QSP+Skatelite","price":618.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/quart-3-wide-1.jpg?v=1729241247"},{"product_id":"quarter-pipe-ramp-4-ft-wide","title":"4 Foot Wide Quarter Pipe Ramp","description":"  \u003cp\u003e\u003cstrong\u003eFour feet wide and easy to place where you skate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 4 Foot Wide Quarter Pipe Ramp balances a taller home transition with a feature that can still be repositioned when the room needs to change. It suits a buyer who needs a real 3-foot-2-inch transition but does not want that decision to permanently consume the space.\u003c\/p\u003e\u003ch2\u003ePlan for the taller compact ramp\u003c\/h2\u003e\u003cp\u003eThis ramp is 3 feet 2 inches tall, 4 feet wide, 6 feet 5 inches deep, and 175 pounds. Those dimensions make it more than a casual corner obstacle, so its approach and exit deserve to be laid out before purchase. Place it where the transition can work without forcing a rider into a wall or a storage zone.\u003c\/p\u003e\u003ch2\u003eUse the caster wheels as a planning tool\u003c\/h2\u003e\u003cp\u003eRear caster wheels help move the four-foot quarter pipe into storage or reset its angle when the space changes. That mobility is useful only with a clear path and a planned resting place. Choose this model when a taller transition needs to share its home with other uses rather than stay fixed forever.\u003c\/p\u003e\u003ch2\u003eTreat paint as exposed-wood protection\u003c\/h2\u003e\u003cp\u003eThe ramp can be ordered without Skate Paint or with one quart for exposed plywood. That choice protects visible wood; GatorSkins and Skatelite Pro are not available surface choices for this ramp. Use paint only where plywood remains exposed; it does not add another top sheet.\u003c\/p\u003e\u003ch2\u003eBuild the moving ramp with both tools ready\u003c\/h2\u003e\u003cp\u003eBring a drill and wrench and set aside one to two hours for the 4 Foot Wide Quarter Pipe Ramp. The kit's pre-cut boards, galvanized metal parts, and photo instructions keep the work understandable when the hardware stays grouped by step. Build on a level foundation and verify the caster-wheel area before moving the ramp into its first position.\u003c\/p\u003e\u003ch2\u003eReset the space without losing the ramp\u003c\/h2\u003e\u003cp\u003eThe four-foot ramp can be stored or re-angled when the home setup needs to serve another purpose. Keep its travel path open and avoid surrounding it with features that make movement impossible. That makes rear caster wheels a real practical benefit rather than a detail that only sounds useful in the cart.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne 4-foot-wide quarter pipe kit in the selected Skate Paint configuration\u003c\/li\u003e\n\u003cli\u003eExterior-grade lumber and plywood parts\u003c\/li\u003e\n\u003cli\u003ePre-counted rust-resistant screws and required galvanized metal parts\u003c\/li\u003e\n\u003cli\u003ePre-cut and pre-drilled boards with computer-cut transition pieces\u003c\/li\u003e\n\u003cli\u003ePhoto instruction booklet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping to the contiguous U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003e4 Foot Wide Quarter Pipe Ramp freight delivery\u003c\/h3\u003e\u003cp\u003eThe kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.\u003c\/p\u003e\u003ch3\u003eAssembly planning\u003c\/h3\u003e\u003cp\u003eAssembly uses a drill and wrench and takes about 1 to 2 hours. Build on a level foundation with the required tools and follow the photo instructions.\u003c\/p\u003e\u003ch3\u003eQuestions about 4 Foot Wide Quarter Pipe Ramp\u003c\/h3\u003e\u003ch4\u003eHow does the 4 Foot Wide Quarter Pipe differ from the 3 Foot Wide model?\u003c\/h4\u003e\u003cp\u003eThe four-foot ramp is 3 feet 2 inches tall, 6 feet 5 inches deep, weighs 175 pounds, and includes rear caster wheels. The smaller model is two feet tall, 3 feet 2 inches wide, four feet deep, weighs approximately 68 to 70 pounds, and has no rear wheels. Choose by complete geometry, approach space, and movement plan.\u003c\/p\u003e\u003ch4\u003eWhen should I choose one 4 Foot Wide Quarter Pipe instead of the pair?\u003c\/h4\u003e\u003cp\u003eChoose the single 4 Foot Wide Quarter Pipe when one 3-foot-2-inch transition serves the space and one movement route is enough. The pair provides two complete 175-pound ramps that can face each other, sit separately, or move into storage on rear casters. Buy two only when both approaches, exits, and storage paths remain usable.\u003c\/p\u003e\u003ch4\u003eHow does the 4 Foot Wide Quarter Pipe compare with the 6 Foot Wide model?\u003c\/h4\u003e\u003cp\u003eBoth ramps are 3 feet 2 inches tall, 6 feet 5 inches deep, and use rear caster wheels. The 4-foot model weighs 175 pounds; the 6-foot model adds two feet of coping span and weighs 215 pounds. Choose the larger span only when the rider will use it and the site keeps the approach and storage route clear.\u003c\/p\u003e\u003ch4\u003eWhat can riders practice on the 4 Foot Wide Quarter Pipe Ramp?\u003c\/h4\u003e\u003cp\u003eUse the 4 Foot Wide Quarter Pipe Ramp for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the 4 Foot Wide Quarter Pipe Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/quarter-pipes\"\u003eCompare Quarter Pipe Ramps\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607707730103,"sku":"Q4","price":849.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":39607707762871,"sku":"Q4+1xQuart","price":928.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/quart-4-wide-3.jpg?v=1729241247"},{"product_id":"micro-spine","title":"Micro Spine Skate Ramp","description":"  \u003cp\u003e\u003cstrong\u003eA narrow two-sided transition for changing direction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Micro Spine Skate Ramp is an eight-foot-long, two-foot-wide, 15-inch-high two-sided transition with a drill-and-one-hour build and a one-quart Skate Paint option. It is for a rider who wants direction changes over a compact spine instead of another one-way bank or kicker.\u003c\/p\u003e\u003ch2\u003eTwo transition faces keep the session moving\u003c\/h2\u003e\u003cp\u003eThe Micro Spine has usable transition faces on both sides. That two-sided shape lets riders approach from either direction and carry movement over the center. This makes sense when the setup needs a compact spine that changes direction rather than a one-way launch surface.\u003c\/p\u003e\u003ch2\u003eEight feet long in a two-foot-wide body\u003c\/h2\u003e\u003cp\u003eThe Micro Spine measures 8 feet long, 2 feet wide, and 15 inches high. Those dimensions create a narrow, two-sided transition feature. Give both faces clear pavement so neither approach is blocked by a wall, rail, or another obstacle and the full spine remains usable.\u003c\/p\u003e\u003ch2\u003eA drill and one hour support the build\u003c\/h2\u003e\u003cp\u003eThe Micro Spine calls for a drill and an estimated one hour of assembly. That build commitment is part of owning a two-sided transition ramp. Keep the parts organized, follow the photo instructions, and inspect the completed spine on level pavement.\u003c\/p\u003e\u003ch2\u003eUse the narrow width to connect two directions\u003c\/h2\u003e\u003cp\u003eAt two feet wide, Micro Spine can sit between other features without becoming a broad wall across the spot. Keep both transition faces open, then use the narrow body to create a direction change between routes. That gives the compact spine a useful connecting role alongside larger features.\u003c\/p\u003e\u003ch2\u003eProtect the exposed plywood for outdoor use\u003c\/h2\u003e\u003cp\u003eOne quart of Skate Paint is specified for the Micro Spine's exposed plywood, and its materials are designed for outdoor use. Treat the coating as wood care for this two-sided ramp, separate from the decision about its 15-inch transition profile.\u003c\/p\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAssembly details\u003c\/h3\u003e\u003cp\u003eMicro Spine has an estimated one-hour assembly window and requires a drill. Its two 15-inch transition faces need an open approach on both sides, so settle the final placement after the build.\u003c\/p\u003e\u003ch3\u003eQuestions about Micro Spine Skate Ramp\u003c\/h3\u003e\u003ch4\u003eHow does Micro Spine differ from the Quarter Pipe Spine Ramp?\u003c\/h4\u003e\u003cp\u003eMicro Spine is the narrower, lower option at 15 inches high and two feet wide. Quarter Pipe Spine stands two feet high and is wider. Choose Micro Spine when a compact two-sided transition better fits the rider and site; choose the larger spine for more scale.\u003c\/p\u003e\u003ch4\u003eHow does Micro Spine compare with the Green Monster Flat Rail?\u003c\/h4\u003e\u003cp\u003eMicro Spine is a two-foot-wide, 15-inch-high ramp with transition faces on both sides. Green Monster is a 25-pound flat rail with an 11-to-14-inch adjustable height range and a body that separates for moving. Choose Micro Spine when the route needs a compact direction change; choose Green Monster when a narrow adjustable grinding surface is the missing obstacle.\u003c\/p\u003e\u003ch4\u003eHow does Micro Spine compare with Launch WR?\u003c\/h4\u003e\u003cp\u003eMicro Spine uses two back-to-back transition faces, while Launch WR combines a launch face with a wallie face. Compare the movement the rider wants to repeat. Both are compact multi-face obstacles, but they change direction in different ways and should not be treated as substitutes by name alone.\u003c\/p\u003e\u003ch4\u003eHow can riders use the Micro Spine Skate Ramp?\u003c\/h4\u003e\u003cp\u003eUse the Micro Spine Skate Ramp as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Micro Spine Skate Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003elaunch ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607709106359,"sku":"MicroSpine","price":399.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":39607709139127,"sku":"MicroSpine+QSP","price":478.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/019.jpg?v=1729241247"},{"product_id":"quarter-pipe-ramps-two-3-foot","title":"Pair of 3 Foot Quarter Pipes","description":"  \u003cp\u003e\u003cstrong\u003eTwo compact quarter pipes, more than one setup\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Pair of 3 Foot Quarter Pipes is for a smaller setup that wants choice instead of one fixed transition. Face them together for back-and-forth riding, split them apart for separate approaches, or use the gap between them as the rest of the setup changes.\u003c\/p\u003e\u003ch2\u003eMeasure each ramp, then the space between\u003c\/h2\u003e\u003cp\u003eEach ramp in this pair is 2 feet tall, 3 feet 2 inches wide, 4 feet deep, and approximately 67 to 70 pounds. The pair is not one merged obstacle. Plan the footprint and approach for each transition, then decide how much clear ground should sit between them for the arrangement you want to skate.\u003c\/p\u003e\u003ch2\u003eMake two compact transitions do different work\u003c\/h2\u003e\u003cp\u003eThe pair can face each other for back-and-forth runs, sit side by side around a gap, or be separated into different parts of the space. That flexibility is the reason to choose two ramps. Start with the arrangement that creates the clearest approaches, then keep enough room to change it when the session needs something new.\u003c\/p\u003e\u003ch2\u003eProtect both ramps' exposed plywood\u003c\/h2\u003e\u003cp\u003eThe pair can be ordered without Skate Paint or with two quarts to protect exposed plywood across both ramps. Paint is a wood-protection decision, not an added GatorSkins or Skatelite Pro surface. Choose it when the selected pair leaves plywood exposed; no premium sheet material is offered for this pair.\u003c\/p\u003e\u003ch2\u003eBuild one compact transition at a time\u003c\/h2\u003e\u003cp\u003ePlan about 30 to 45 minutes with a drill for each ramp. Keep the pre-cut pieces and counted hardware for the first ramp together until it is complete, then repeat the photo-guided process for the second. That avoids mixing components and lets the pair be checked as two complete, matching builds.\u003c\/p\u003e\u003ch2\u003eKeep the pair flexible after assembly\u003c\/h2\u003e\u003cp\u003eTwo small quarter pipes only add value when they can be arranged with clear approaches. Try the face-to-face position, a side-by-side gap, and a separated setup before treating one arrangement as permanent. That lets the pair change the session without forcing either ramp to compete for the same narrow path.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo 3-foot quarter pipe ramps in the selected Skate Paint configuration\u003c\/li\u003e\n\u003cli\u003eExterior-grade lumber and plywood parts\u003c\/li\u003e\n\u003cli\u003ePre-counted rust-resistant screws and required galvanized metal parts\u003c\/li\u003e\n\u003cli\u003ePre-cut and pre-drilled boards with computer-cut transition pieces\u003c\/li\u003e\n\u003cli\u003ePhoto instruction booklet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping to the contiguous U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eBoxed kit delivery\u003c\/h3\u003e\u003cp\u003eThe kit arrives packaged for assembly. Keep the components together, inspect the shipment when it arrives, and report any visible damage promptly.\u003c\/p\u003e\u003ch3\u003eAssembly planning\u003c\/h3\u003e\u003cp\u003eAssembly uses a drill and takes about 30 to 45 minutes per ramp. Build on a level foundation with the required tools and follow the photo instructions.\u003c\/p\u003e\u003ch3\u003eQuestions about Pair of 3 Foot Quarter Pipes\u003c\/h3\u003e\u003ch4\u003eWhen does the Pair of 3 Foot Quarter Pipes make more sense than one compact ramp?\u003c\/h4\u003e\u003cp\u003eOne 3 Foot Wide Quarter Pipe creates a single compact transition and can be ordered with plywood or Skatelite. This pair creates two matching two-foot-tall transitions that can face each other or support separate approaches, but it does not offer a premium sheet surface. Choose the pair only when two positions materially improve the session and the site can keep both routes clear; otherwise, one ramp is the simpler fit.\u003c\/p\u003e\u003ch4\u003eHow does the Pair of 3 Foot Quarter Pipes compare with the American Flag Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eBoth use the compact two-foot-tall, roughly three-foot-wide, four-foot-deep transition. The pair supplies two matching ramps and offers an optional two-quart Skate Paint choice across them. The American Flag product is one 70-pound ramp with its graphic fixed to the design and no separate paint choice. Choose two configurable positions or one dedicated graphic statement.\u003c\/p\u003e\u003ch4\u003eHow does the Pair of 3 Foot Quarter Pipes differ from Greg Lutzka's 3 in 1?\u003c\/h4\u003e\u003cp\u003eThe pair provides two dedicated two-foot quarter-pipe transitions that can be arranged around the site. Greg Lutzka's 3 in 1 is one 12-inch-tall, four-foot-wide, 39-inch-long obstacle that can work as a quarter pipe, ledge, or launch ramp according to the approach. Choose two matching transitions for back-and-forth variety or one smaller multi-role feature for a more compact setup.\u003c\/p\u003e\u003ch4\u003eWhat can riders practice with Pair of 3 Foot Quarter Pipes?\u003c\/h4\u003e\u003cp\u003eFace the pair for back-and-forth transition runs or use each quarter pipe as a separate return point in a larger line. Common progression includes kickturns, rock-to-fakies, axle stalls, and transfers that match the rider's ability and the available clearance.\u003c\/p\u003e\u003ch4\u003eCan I return the Pair of 3 Foot Quarter Pipes if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/quarter-pipes\"\u003eCompare Quarter Pipe Ramps\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607776051383,"sku":"2xQ3","price":758.0,"currency_code":"USD","in_stock":true},{"title":"2 Quarts","offer_id":39607776084151,"sku":"2xQ3+2xQuarts","price":916.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/mirror-Q3.jpg?v=1729241247"},{"product_id":"quarter-pipe-ramps-two-4-foot","title":"Pair of 4 Foot Quarter Pipes","description":"  \u003cp\u003e\u003cstrong\u003eTwo four-foot quarter pipes that can keep moving\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Pair of 4 Foot Quarter Pipes gives a home setup two matched, movable transitions rather than one fixed destination. Rear caster wheels make the pair especially useful for a space that shifts between skating, storage, and different arrangements from one session to the next.\u003c\/p\u003e\u003ch2\u003ePlan each four-foot transition separately\u003c\/h2\u003e\u003cp\u003eEach ramp is 3 feet 2 inches tall, 4 feet wide, 6 feet 5 inches deep, and 175 pounds. Give both ramps their own approach and exit before deciding how they relate to each other. That protects the utility of a pair: two complete transitions, not two ramps squeezed into the same piece of floor.\u003c\/p\u003e\u003ch2\u003eLet the caster wheels earn their place\u003c\/h2\u003e\u003cp\u003eRear caster wheels allow the pair to move between facing, separated, and stored positions as the space changes. Choose this pair when that flexibility is genuinely useful, then plan the paths needed to move each ramp. A movable ramp still needs a clear route, a stable skating position, and somewhere sensible to rest.\u003c\/p\u003e\u003ch2\u003eUse paint for wood, not as a surface claim\u003c\/h2\u003e\u003cp\u003eThe pair can be ordered with no Skate Paint or with two quarts for exposed plywood across both ramps. That is not a GatorSkins or Skatelite Pro upgrade. Paint protects the wood that remains visible, while the two ramps keep the plywood configuration described for this product.\u003c\/p\u003e\u003ch2\u003eComplete one ramp before opening the second\u003c\/h2\u003e\u003cp\u003ePlan about one to two hours with a drill and wrench. Stage one ramp's pre-cut components and hardware, follow the photo instructions through its connection checks, then repeat the process for the matching second ramp. Keeping the two builds separate makes the paired kit easier to verify and manage.\u003c\/p\u003e\u003ch2\u003eChange the relationship without crowding it\u003c\/h2\u003e\u003cp\u003eThe strongest arrangement gives each four-foot ramp a clean approach, whether they face one another, sit apart, or go into storage. Test the pair in more than one position before adding other obstacles. That preserves the flexibility the caster wheels were meant to provide instead of turning the two transitions into one congested cluster.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo 4-foot quarter pipe ramps in the selected Skate Paint configuration\u003c\/li\u003e\n\u003cli\u003eExterior-grade lumber and plywood parts\u003c\/li\u003e\n\u003cli\u003ePre-counted rust-resistant screws and required galvanized metal parts\u003c\/li\u003e\n\u003cli\u003ePre-cut and pre-drilled boards with computer-cut transition pieces\u003c\/li\u003e\n\u003cli\u003ePhoto instruction booklet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping to the contiguous U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003ePair of 4 Foot Quarter Pipes freight delivery\u003c\/h3\u003e\u003cp\u003eThe kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.\u003c\/p\u003e\u003ch3\u003eAssembly planning\u003c\/h3\u003e\u003cp\u003eAssembly uses a drill and wrench and takes about 1 to 2 hours. Build on a level foundation with the required tools and follow the photo instructions.\u003c\/p\u003e\u003ch3\u003eQuestions about Pair of 4 Foot Quarter Pipes\u003c\/h3\u003e\u003ch4\u003eWhen should I choose the Pair of 4 Foot Quarter Pipes instead of one four-foot ramp?\u003c\/h4\u003e\u003cp\u003eEach ramp in the pair shares the single model's 3-foot-2-inch height, 4-foot width, 6-foot-5-inch depth, 175-pound weight, and rear casters. The pair adds a second complete transition and uses a two-quart paint choice across both, while the single ramp uses one quart. Choose two only when facing or separated approaches justify the extra footprint, movement route, build, and storage position.\u003c\/p\u003e\u003ch4\u003eHow does the Pair of 4 Foot Quarter Pipes compare with the Pair of 3 Foot Quarter Pipes?\u003c\/h4\u003e\u003cp\u003eThe three-foot pair keeps each ramp two feet tall, four feet deep, and about 67 to 70 pounds. Each four-foot ramp rises to 3 feet 2 inches, reaches 6 feet 5 inches deep, weighs 175 pounds, and includes rear casters. Choose the compact pair for a smaller layout; choose four feet when the taller geometry and planned caster route fit the site.\u003c\/p\u003e\u003ch4\u003eWhat changes between the Pair of 4 Foot Quarter Pipes and the eight-foot pair?\u003c\/h4\u003e\u003cp\u003eBoth pairs use 3-foot-2-inch-tall, 6-foot-5-inch-deep ramps with rear casters. Each four-foot ramp weighs 175 pounds; each eight-foot ramp weighs 350 pounds and doubles the coping span. Choose four feet when two movable transitions need a more contained footprint. Move to eight feet only when the riders will use that width and the property can preserve two full approaches and storage routes.\u003c\/p\u003e\u003ch4\u003eWhat can riders practice with Pair of 4 Foot Quarter Pipes?\u003c\/h4\u003e\u003cp\u003eFace the pair for back-and-forth transition runs or use each quarter pipe as a separate return point in a larger line. Common progression includes kickturns, rock-to-fakies, axle stalls, and transfers that match the rider's ability and the available clearance.\u003c\/p\u003e\u003ch4\u003eCan I return the Pair of 4 Foot Quarter Pipes if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/quarter-pipes\"\u003eCompare Quarter Pipe Ramps\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607772872887,"sku":"2xQ4","price":1669.0,"currency_code":"USD","in_stock":true},{"title":"2 Quarts","offer_id":39607772905655,"sku":"2xQ4+2xQuarts","price":1827.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/5.jpg?v=1729241248"},{"product_id":"quarter-pipe-ramp-spine","title":"Quarter Pipe Spine Ramp","description":"  \u003cp\u003e\u003cstrong\u003eA two-sided 2-foot spine for open approaches\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Quarter Pipe Spine Ramp is a two-sided transition ramp measuring 2 feet high, 3 feet 2 inches wide, and 6 feet 4 inches deep. With a drill-and-one-to-two-hour build, a one-quart Skate Paint requirement, and outdoor-use materials, it is for a rider who can keep both approaches open.\u003c\/p\u003e\u003ch2\u003eA true two-sided spine transition\u003c\/h2\u003e\u003cp\u003eThe Quarter Pipe Spine Ramp has transition faces on both sides. That two-sided configuration is the reason to choose it over a one-way bank. It suits a setup where riders can approach from either direction and carry movement over the spine instead of stopping at one face.\u003c\/p\u003e\u003ch2\u003eTwo feet high with a six-foot-four-inch depth\u003c\/h2\u003e\u003cp\u003eThe Quarter Pipe Spine Ramp measures 2 feet high, 3 feet 2 inches wide, and 6 feet 4 inches deep. Those dimensions define the ramp body. Both transition faces need their own clear pavement, so the placement should be mapped as a two-way feature.\u003c\/p\u003e\u003ch2\u003ePlan one to two hours for assembly\u003c\/h2\u003e\u003cp\u003eAssembly requires a drill and about one to two hours. Keep the two transition sections organized, follow the photo instructions, and inspect the finished spine on level ground before either side is used. The build window belongs in the site plan, not in the first session.\u003c\/p\u003e\u003ch2\u003eBuild a return route around the spine\u003c\/h2\u003e\u003cp\u003eA two-sided spine can connect more than one part of a setup when the surrounding route returns riders to either face. Plan how the rider circulates after the roll-away instead of treating both approaches as isolated strips of pavement. That makes the center transition useful beyond one pass.\u003c\/p\u003e\u003ch2\u003ePaint and outdoor materials address the wood\u003c\/h2\u003e\u003cp\u003eOne quart of Skate Paint is specified for the Quarter Pipe Spine Ramp's exposed plywood, and its materials are designed for outdoor use. That coating is part of wood care for this exact two-sided ramp, not a replacement for thoughtful placement.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Quarter Pipe Ramp Spine\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAssembly details\u003c\/h3\u003e\u003cp\u003eQuarter Pipe Spine Ramp has an estimated one-to-two-hour assembly window and requires a drill. The completed two-foot spine needs room on both transition faces, making final placement part of the build decision.\u003c\/p\u003e\u003ch3\u003eQuestions about Quarter Pipe Spine Ramp\u003c\/h3\u003e\u003ch4\u003eHow does Quarter Pipe Spine differ from Micro Spine?\u003c\/h4\u003e\u003cp\u003eQuarter Pipe Spine stands two feet high and is 3 feet 2 inches wide, giving it more scale than the 15-inch-high, two-foot-wide Micro Spine. Both are two-sided, so choose between them by rider comfort and available room rather than product name alone.\u003c\/p\u003e\u003ch4\u003eHow does Quarter Pipe Spine compare with Jordan Hoffart's Speed Bump?\u003c\/h4\u003e\u003cp\u003eQuarter Pipe Spine uses two curved transition faces over a shared center and stands two feet high. The Speed Bump is lower, broader, and built around one continuous bump profile. Choose the spine when two-way transition is the job; choose the Speed Bump when the route needs a wide flowing obstacle.\u003c\/p\u003e\u003ch4\u003eIs Quarter Pipe Spine the same as placing two separate quarter pipes back to back?\u003c\/h4\u003e\u003cp\u003eNo. It is sold as one purpose-built two-sided spine with a shared center. Two separate quarter pipes would remain independent products with their own placement and connection decisions. Choose the spine when one integrated transition over the center is the intended riding shape.\u003c\/p\u003e\u003ch4\u003eHow can riders use the Quarter Pipe Spine Ramp?\u003c\/h4\u003e\u003cp\u003eUse the Quarter Pipe Spine Ramp as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Quarter Pipe Spine Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003elaunch ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39490541813943,"sku":"Spine","price":489.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/spine1.jpg?v=1729241247"},{"product_id":"unicorn-skate-ramp","title":"Unicorn Quarter Pipe Ramp","description":"  \u003cp\u003e\u003cstrong\u003eA unicorn quarter pipe that is ready to stand out\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Unicorn Quarter Pipe Ramp combines a six-foot-wide transition with an engraved graphic and shown colors that are part of this specific build. It is for a home setup that wants a usable ramp with personality, plus rear wheels for the practical moments when the space needs to change.\u003c\/p\u003e\u003ch2\u003eGive the six-foot ramp a clear home\u003c\/h2\u003e\u003cp\u003eThe Unicorn Quarter Pipe Ramp is 2 feet 6 inches tall, 6 feet wide, 6 feet 5 inches deep, and 185 pounds. That gives it more presence than a very small quarter pipe while remaining manageable in a thoughtful home layout. Plan the approach, exit, and storage route before deciding the graphic belongs in the space.\u003c\/p\u003e\u003ch2\u003eChoose the engraved Unicorn build\u003c\/h2\u003e\u003cp\u003eThe engraved unicorn graphic and shown colors are part of this specific six-foot quarter pipe. Choose it when that visual identity matters alongside the transition itself. This is a distinct Unicorn build, not a generic finish that can be moved to another quarter pipe configuration.\u003c\/p\u003e\u003ch2\u003eUse the paint option for exposed plywood\u003c\/h2\u003e\u003cp\u003eThe Unicorn ramp has an optional one-quart Skate Paint selection for exposed plywood. That paint protects visible wood; GatorSkins and Skatelite Pro are not available surface choices for this ramp. Keep the engraved graphic and shown colors separate from the wood-protection choice.\u003c\/p\u003e\u003ch2\u003eBuild the Unicorn with a drill and wrench\u003c\/h2\u003e\u003cp\u003eThe Unicorn build calls for a drill and wrench over one to two hours. Pre-cut and pre-drilled parts, counted fasteners, and photo instructions give the builder a clear route through the project. Work on a level foundation, keep the graphic-specific components protected, and check the completed structure before skating.\u003c\/p\u003e\u003ch2\u003eLet the rear wheels preserve flexibility\u003c\/h2\u003e\u003cp\u003eRear wheels help move the Unicorn ramp when the session or storage plan changes. Choose a location that makes that benefit real, with an open route to its alternate position. That preserves the ramp's practical side without losing the clear approach and visual presence that made this particular build appealing.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne 6-foot-wide Unicorn Quarter Pipe Ramp in the selected Skate Paint configuration\u003c\/li\u003e\n\u003cli\u003eExterior-grade lumber and plywood parts\u003c\/li\u003e\n\u003cli\u003ePre-counted rust-resistant screws and required galvanized metal parts\u003c\/li\u003e\n\u003cli\u003ePre-cut and pre-drilled boards with computer-cut transition pieces\u003c\/li\u003e\n\u003cli\u003ePhoto instruction booklet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping to the contiguous U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eUnicorn Quarter Pipe Ramp freight delivery\u003c\/h3\u003e\u003cp\u003eThe kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.\u003c\/p\u003e\u003ch3\u003eAssembly planning\u003c\/h3\u003e\u003cp\u003eAssembly uses a drill and wrench and takes about 1 to 2 hours. Build on a level foundation with the required tools and follow the photo instructions.\u003c\/p\u003e\u003ch3\u003eQuestions about Unicorn Quarter Pipe Ramp\u003c\/h3\u003e\u003ch4\u003eHow does the Unicorn Quarter Pipe Ramp compare with the Blue Tile Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eBoth are signature graphic ramps, but their geometry is different. The Unicorn is 2 feet 6 inches tall, 6 feet wide, 6 feet 5 inches deep, weighs 185 pounds, and uses rear wheels. The Blue Tile is 2 feet tall, 4 feet wide, 4 feet deep, weighs 68 pounds, and carries Brad McClain artwork. Choose the transition and footprint first, then the visual identity.\u003c\/p\u003e\u003ch4\u003eHow does the Unicorn Quarter Pipe Ramp differ from the American Flag Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eThe Unicorn is a 2-foot-6-inch-tall, six-foot-wide transition with rear wheels, an engraved graphic, shown colors, and an optional one-quart Skate Paint choice. The American Flag model is a compact two-foot-tall, 3-foot-2-inch-wide, 70-pound ramp with a fixed graphic and no separate paint choice. Choose between the larger movable Unicorn layout and the smaller fixed-design transition the site can use comfortably.\u003c\/p\u003e\u003ch4\u003eHow does the Unicorn Quarter Pipe Ramp compare with the standard 4 Foot Wide Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eThe Unicorn stands 2 feet 6 inches tall, spans six feet, weighs 185 pounds, and makes its engraved identity part of the product. The standard four-foot ramp is 3 feet 2 inches tall, weighs 175 pounds, uses rear casters, and offers a plain configurable presentation. Both are 6 feet 5 inches deep. Choose by transition height and usable width before deciding whether the Unicorn design belongs in the setup.\u003c\/p\u003e\u003ch4\u003eWhat can riders practice on the Unicorn Quarter Pipe Ramp?\u003c\/h4\u003e\u003cp\u003eUse the Unicorn Quarter Pipe Ramp for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Unicorn Quarter Pipe Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/quarter-pipes\"\u003eCompare Quarter Pipe Ramps\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607806656695,"sku":"UnicornQ6","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":39607806689463,"sku":"UnicornQ6+Quart","price":1578.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/OCramps_UnicornRamp_7.jpg?v=1729241275"},{"product_id":"gb-kicker","title":"GB Kicker Ramp","description":"  \u003cp\u003e\u003cstrong\u003eA low four-foot kicker for a focused launch decision\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GB Kicker Ramp is a nine-inch-high, four-foot-long obstacle with a 19-inch width, a short assembly window, and a one-quart Skate Paint requirement. It suits a rider choosing a compact kicker instead of a taller bank or a long multi-part launch feature.\u003c\/p\u003e\u003ch2\u003eA nine-inch kicker keeps the launch low\u003c\/h2\u003e\u003cp\u003eThe GB Kicker Ramp measures 9 inches high. That low profile makes it a different choice from a tall bank or large transition. It works best when the session needs a compact launch target without turning a small area into a major ramp installation.\u003c\/p\u003e\u003ch2\u003eFour feet long and 19 inches wide\u003c\/h2\u003e\u003cp\u003eThe GB Kicker Ramp measures 4 feet long and 19 inches wide. Those dimensions define a narrow, focused obstacle. Leave clear pavement on the approach and exit, because the usable riding path is larger than the four-foot structure alone and needs a straight entry.\u003c\/p\u003e\u003ch2\u003eTen minutes and a drill for the build\u003c\/h2\u003e\u003cp\u003eAssembly requires a drill and takes about 10 minutes. That short estimate is useful for planning, not a reason to rush the finished obstacle. Organize the parts, complete the build on level ground, align the nine-inch connection profile, and inspect the kicker before riding.\u003c\/p\u003e\u003ch2\u003ePaint belongs to the exposed wood\u003c\/h2\u003e\u003cp\u003eOne quart of Skate Paint is specified for the GB Kicker Ramp. That quantity is tied to the kicker's exposed plywood and outdoor-care needs. Treat the coating as part of maintaining this wood feature, not as a generic add-on for any obstacle.\u003c\/p\u003e\u003ch2\u003eBuild launch and grind lines around the GB Kicker\u003c\/h2\u003e\u003cp\u003eUse the GB Kicker as a compact launch, or align its nine-inch height and 19-inch width with a compatible OC Ramps Grind Box to create a focused approach. Riders can work on controlled launches, ollies, and box tricks while keeping a straight run-in and clear roll-away around the full setup.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne GB Kicker ramp\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAssembly details\u003c\/h3\u003e\u003cp\u003eFor GB Kicker Ramp, assembly is estimated at 10 minutes and the tools are drill. Follow the product instructions for the exact kit.\u003c\/p\u003e\u003ch3\u003eQuestions about GB Kicker Ramp\u003c\/h3\u003e\u003ch4\u003eHow is the GB Kicker intended to work with an OC Ramps Grind Box?\u003c\/h4\u003e\u003cp\u003eThe nine-inch height and 19-inch width align with the Grind Box profile, allowing the kicker to form a planned approach into the box. Choose the Grind Box length separately, then map the combined route so the connection improves the session instead of crowding it.\u003c\/p\u003e\u003ch4\u003eWhy would I choose the GB Kicker over the Wedge Bump?\u003c\/h4\u003e\u003cp\u003eChoose the GB Kicker when its narrow profile and Grind Box relationship are the priority. Choose the broader Wedge Bump when a more general launch or connector fits the obstacle mix. The better ramp is the one that solves the actual route as opposed to the one with the bigger footprint.\u003c\/p\u003e\u003ch4\u003eCan the GB Kicker connect with different Grind Box lengths?\u003c\/h4\u003e\u003cp\u003eYes. Its matching nine-inch height and 19-inch width support the Grind Box profile while the box length is chosen as a separate product. Plan enough pavement for the selected length and kicker together so the combined feature has a usable run-in and roll-away.\u003c\/p\u003e\u003ch4\u003eHow can riders use the GB Kicker Ramp?\u003c\/h4\u003e\u003cp\u003eUse the GB Kicker Ramp as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the GB Kicker Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003elaunch ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39490599092407,"sku":"GBK","price":159.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/kicker.jpg?v=1654711722"},{"product_id":"grind-box-8-foot","title":"8 Foot Grind Box","description":"  \u003cp\u003e\u003cstrong\u003eAn eight-foot box for a longer dedicated ledge\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 8 Foot Grind Box is a nine-inch-high, 19-inch-deep ledge that weighs 68 pounds and uses galvanized metal details. A one-quart Skate Paint option covers the exposed plywood. It is the long-format choice for riders who want more continuous ledge distance and have pavement to give it a proper route.\u003c\/p\u003e\u003ch2\u003eEight feet makes this the long-format box\u003c\/h2\u003e\u003cp\u003eThe 8 Foot Grind Box measures 8 feet long. That extended length is the reason to choose it over shorter grind boxes. It needs a meaningful clear approach and exit, so reserve a section of pavement where the full ledge can actually be used.\u003c\/p\u003e\u003ch2\u003eA low profile across a long body\u003c\/h2\u003e\u003cp\u003eThe 8 Foot Grind Box measures 9 inches high and 19 inches deep. The height stays low while the length becomes substantial. That combination fits a rider who wants a long ledge without stepping up to a taller obstacle with a different visual and riding role.\u003c\/p\u003e\u003ch2\u003eSixty-eight pounds favors a settled location\u003c\/h2\u003e\u003cp\u003eAt 68 pounds, the 8 Foot Grind Box is more substantial than the shorter formats. It can be moved with planning, but the long body is best treated as a settled feature within the layout. Choose the spot around its full eight-foot working length.\u003c\/p\u003e\u003ch2\u003eGalvanized metal protects the metal details\u003c\/h2\u003e\u003cp\u003eThe 8 Foot Grind Box uses galvanized metal parts alongside its wood construction. Treat those materials as separate care decisions: the protected metal belongs to the long working feature, while exposed plywood still needs the appropriate outdoor-care plan for the selected configuration.\u003c\/p\u003e\u003ch2\u003ePaint is an option for exposed plywood\u003c\/h2\u003e\u003cp\u003eThe selector offers one quart of Skate Paint for the 8 Foot Grind Box's exposed plywood. The coating option applies to the wooden portions of this long ledge. Add it when the outdoor-care plan calls for paint, instead of expecting it in every configuration.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne 8 Foot Grind Box in the selected Skate Paint option\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAbout 25 minutes to assemble\u003c\/h3\u003e\u003cp\u003eThe 8 Foot Grind Box arrives pre-drilled and pre-cut, with about 25 minutes of assembly. Its 68-pound weight calls for a deliberate move and a stable position along the full eight-foot edge.\u003c\/p\u003e\u003ch3\u003eQuestions about 8 Foot Grind Box\u003c\/h3\u003e\u003ch4\u003eHow does the 8 Foot Grind Box compare with the Green Monster Flat Rail?\u003c\/h4\u003e\u003cp\u003eThe Grind Box is a nine-inch-high, 19-inch-deep wooden ledge with an eight-foot body. Green Monster uses a flat metal working profile, adjusts from 11 to 14 inches, weighs 25 pounds, and separates for moving. Choose the Grind Box for a broad low ledge; choose Green Monster when an adjustable, lighter rail better fits the session.\u003c\/p\u003e\u003ch4\u003eCan the 8 Foot Grind Box work with the GB Kicker?\u003c\/h4\u003e\u003cp\u003eYes. The GB Kicker matches the Grind Box profile and can create an approach into the box. Because the eight-foot ledge already needs a longer lane, map the combined setup carefully before deciding that both pieces belong in the same spot.\u003c\/p\u003e\u003ch4\u003eHow does the 8 Foot Grind Box compare with a shoe-box ledge?\u003c\/h4\u003e\u003cp\u003eThe Grind Box provides a straightforward low rectangular ledge, while the éS and HUF Shoe Boxes use much larger branded bodies with coping on both sides. Choose the eight-foot box when working length matters more than a signature silhouette or double-sided shoe form.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the 8 Foot Grind Box?\u003c\/h4\u003e\u003cp\u003eUse the 8 Foot Grind Box for ledge skills such as 50-50 grinds, boardslides, noseslides, and ollies on or off the obstacle. Where the top and geometry support it, riders can also work on manuals and nose manuals.\u003c\/p\u003e\u003ch4\u003eCan I return the 8 Foot Grind Box if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/grind-boxes\"\u003egrind boxes and ledges\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607827234999,"sku":"G8","price":359.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":39607827267767,"sku":"G8+QSP","price":438.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/OCramps_GrindBox_15_8ft.jpg?v=1729241276"},{"product_id":"grind-box-6-foot","title":"6 Foot Grind Box","description":"  \u003cp\u003e\u003cstrong\u003eA six-foot box when more ledge distance matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 6 Foot Grind Box is a nine-inch-high, 19-inch-deep ledge weighing 45 pounds and a one-quart Skate Paint option. It is for a rider who wants two more feet of working length than the compact four-foot version without committing to the eight-foot box.\u003c\/p\u003e\u003ch2\u003eSix feet changes the working distance\u003c\/h2\u003e\u003cp\u003eThe 6 Foot Grind Box measures 6 feet long. That additional length is its main advantage over a compact four-foot box. Pick it when more usable ledge distance matters enough to justify a larger footprint in the available skate space.\u003c\/p\u003e\u003ch2\u003eA low nine-inch ledge profile\u003c\/h2\u003e\u003cp\u003eThe 6 Foot Grind Box measures 9 inches high and 19 inches deep. Those dimensions keep the ledge's profile low while the six-foot length supplies more working distance. The feature needs an open approach and exit, not only room for its rectangular body.\u003c\/p\u003e\u003ch2\u003eForty-five pounds balances length and movement\u003c\/h2\u003e\u003cp\u003eAt 45 pounds, the 6 Foot Grind Box sits between the shorter and longer box formats in portability. It can be repositioned with planning, but its six-foot length deserves a stable placement. Pick it when that balance suits the session.\u003c\/p\u003e\u003ch2\u003ePre-drilled parts support the longer build\u003c\/h2\u003e\u003cp\u003eThe 6 Foot Grind Box has pre-drilled parts, keeping assembly focused on joining the longer ledge instead of creating a drilling plan from scratch. Follow the supplied instructions, keep the six-foot working edge straight, and make sure the completed box rests level before use.\u003c\/p\u003e\u003ch2\u003eA one-quart paint option for the plywood\u003c\/h2\u003e\u003cp\u003eOne quart of Skate Paint is available for the 6 Foot Grind Box's exposed plywood. That option is about caring for this longer wooden ledge. Select it when the outdoor-use plan calls for coating the wood, not as a default accessory.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne 6 Foot Grind Box kit with product-specific wood, galvanized metal parts, hardware, and photo instructions\u003c\/li\u003e\n\u003cli\u003eOne quart of Skate Paint only when selected\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAbout 20 minutes to assemble\u003c\/h3\u003e\u003cp\u003eThe 6 Foot Grind Box arrives pre-drilled and takes about 20 minutes to assemble. At 45 pounds, it can move between a garage and street spot with planning, but it should stay settled during use.\u003c\/p\u003e\u003ch3\u003eQuestions about 6 Foot Grind Box\u003c\/h3\u003e\u003ch4\u003eHow does the 6 Foot Grind Box compare with Cody McEntire's American Bench?\u003c\/h4\u003e\u003cp\u003eBoth are six feet long, but the Grind Box is a nine-inch-high rectangular ledge that weighs 45 pounds. Cody McEntire's American Bench stands 14 inches high, weighs 60 pounds, and uses a Butter working surface. Choose the Grind Box for a lower standard ledge; choose the signed bench when its taller form and Butter surface fit the session.\u003c\/p\u003e\u003ch4\u003eCan the 6 Foot Grind Box connect with the GB Kicker?\u003c\/h4\u003e\u003cp\u003eYes. The GB Kicker matches the Grind Box at nine inches high and 19 inches wide, creating an optional approach into the longer ledge. Plan enough pavement for both products, complete each build, and make sure the joined route stays level and clear before riding.\u003c\/p\u003e\u003ch4\u003eHow does the 6 Foot Grind Box fit into a mixed obstacle setup?\u003c\/h4\u003e\u003cp\u003eIts middle length can provide a substantial ledge without taking the full lane demanded by the eight-foot box. It works best when the surrounding setup needs a dedicated low edge and still has room for a rail, kicker, or transition to keep a separate route.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the 6 Foot Grind Box?\u003c\/h4\u003e\u003cp\u003eUse the 6 Foot Grind Box for ledge skills such as 50-50 grinds, boardslides, noseslides, and ollies on or off the obstacle. Where the top and geometry support it, riders can also work on manuals and nose manuals.\u003c\/p\u003e\u003ch4\u003eCan I return the 6 Foot Grind Box if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/grind-boxes\"\u003egrind boxes and ledges\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607825498295,"sku":"G6","price":309.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":39607825531063,"sku":"G6+QSP","price":388.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/OCramps_GrindBox_13_6ft.jpg?v=1729241275"},{"product_id":"grind-box-4-foot","title":"4 Foot Grind Box","description":"  \u003cp\u003e\u003cstrong\u003eA compact four-foot box for a smaller ledge decision\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 4 Foot Grind Box is a nine-inch-high, 19-inch-deep ledge weighing 34 pounds and a one-quart Skate Paint option for exposed plywood. It is the compact choice for a rider who values a shorter working length and easier repositioning over extra ledge distance.\u003c\/p\u003e\u003ch2\u003eFour feet keeps the ledge compact\u003c\/h2\u003e\u003cp\u003eThe 4 Foot Grind Box measures 4 feet long. That shorter length makes it a sensible choice when a compact ledge fits the spot better than a six- or eight-foot box. It still needs a clear approach and exit beyond the four-foot structure.\u003c\/p\u003e\u003ch2\u003eNine inches high and 19 inches deep\u003c\/h2\u003e\u003cp\u003eThe 4 Foot Grind Box measures 9 inches high and 19 inches deep. Those dimensions create a low, focused ledge profile rather than a broad platform. Use the actual measurements when deciding if the spot needs a compact grind surface or more working distance.\u003c\/p\u003e\u003ch2\u003eA 34-pound box can change positions\u003c\/h2\u003e\u003cp\u003eAt 34 pounds, the 4 Foot Grind Box is more practical to reposition than the longer grind-box formats. That portability is useful when the setup changes between sessions. Place it securely once the preferred route through the obstacle is established.\u003c\/p\u003e\u003ch2\u003ePre-drilled parts focus the build\u003c\/h2\u003e\u003cp\u003eThe 4 Foot Grind Box has pre-drilled parts. That detail helps keep the assembly focused on the compact box as opposed to creating a separate drilling plan. Follow the product instructions and inspect the finished ledge on stable pavement before riding.\u003c\/p\u003e\u003ch2\u003eChoose paint only for the exposed wood\u003c\/h2\u003e\u003cp\u003eThe selector offers one quart of Skate Paint for the 4 Foot Grind Box's exposed plywood. That is a product-specific wood-care option. Keep the base configuration when the compact box does not need that coating choice, rather than assuming paint arrives automatically.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne 4 Foot Grind Box kit with product-specific wood, galvanized metal parts, hardware, and photo instructions\u003c\/li\u003e\n\u003cli\u003eOne quart of Skate Paint only when selected\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAbout 20 minutes to assemble\u003c\/h3\u003e\u003cp\u003eThe 4 Foot Grind Box arrives pre-drilled and takes about 20 minutes to assemble. Its 34-pound build is intended to be portable, so choose a level skating position and a practical storage spot.\u003c\/p\u003e\u003ch3\u003eQuestions about 4 Foot Grind Box\u003c\/h3\u003e\u003ch4\u003eHow does the 4 Foot Grind Box compare with the Double Step Ledge?\u003c\/h4\u003e\u003cp\u003eThe 4 Foot Grind Box keeps one nine-inch working height in a four-foot-long, 19-inch-deep body. Double Step extends six feet and connects 6.5-inch and 12-inch ledge levels. Choose the Grind Box when compact size and one consistent edge matter; choose Double Step when the setup can use a larger footprint and built-in height changes.\u003c\/p\u003e\u003ch4\u003eCan the 4 Foot Grind Box be used with the GB Kicker?\u003c\/h4\u003e\u003cp\u003eYes. The GB Kicker matches the Grind Box at nine inches high and 19 inches wide, so it can form a planned approach into the box. Map the combined run-in and roll-away first, then assemble and secure each product according to its own instructions.\u003c\/p\u003e\u003ch4\u003eWhat role does the 4 Foot Grind Box add beside a skate rail?\u003c\/h4\u003e\u003cp\u003eThe box supplies a low, broad ledge body, while a rail provides a narrower elevated working surface. Choose the four-foot box when the setup needs a compact ledge rather than another rail. Owning both only makes sense if their routes do not compete for the same limited space.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the 4 Foot Grind Box?\u003c\/h4\u003e\u003cp\u003eUse the 4 Foot Grind Box for ledge skills such as 50-50 grinds, boardslides, noseslides, and ollies on or off the obstacle. Where the top and geometry support it, riders can also work on manuals and nose manuals.\u003c\/p\u003e\u003ch4\u003eCan I return the 4 Foot Grind Box if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/grind-boxes\"\u003egrind boxes and ledges\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607823663287,"sku":"G4","price":239.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":39607823696055,"sku":"G4+QSP","price":318.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/OCramps_GrindBox_3_4ft.jpg?v=1729241277"},{"product_id":"oc-barrier","title":"OC Skate Barrier","description":"  \u003cp\u003e\u003cstrong\u003eA Jersey-style barrier for boardslides, lipslides, and flexible length\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe OC Skate Barrier brings a two-foot-high, 40-inch-wide Jersey-barrier form into a skate setup. At 15 pounds, with Red or White color choices, optional water weight, and a connection feature for multiple barriers, it is a distinct alternative to a standard rail or box.\u003c\/p\u003e\u003ch2\u003eA Jersey-barrier shape built for slides\u003c\/h2\u003e\u003cp\u003eThe OC Skate Barrier uses a familiar Jersey-barrier silhouette for boardslides and lipslides. Its two-foot height gives the form real scale. It fits when riders need a slide-focused obstacle with a roadwork profile instead of another round rail or rectangular ledge.\u003c\/p\u003e\u003ch2\u003eTwo feet high and 40 inches wide\u003c\/h2\u003e\u003cp\u003eThe OC Skate Barrier measures 2 feet high and 40 inches wide. Those dimensions create a compact but visible obstacle. Leave a clear approach and exit around the barrier so the 40-inch body does not interrupt the path to another feature.\u003c\/p\u003e\u003ch2\u003eOne barrier can stand alone or connect\u003c\/h2\u003e\u003cp\u003eMultiple OC Skate Barriers can connect into a longer obstacle, while one barrier can also stand alone. That connection feature changes the purchase decision from one fixed length to a setup that can grow. Plan the joined length around the actual pavement available.\u003c\/p\u003e\u003ch2\u003eWater can add weight when needed\u003c\/h2\u003e\u003cp\u003eThe OC Skate Barrier measures 15 pounds, and water can be added when extra weight is needed. That makes stability a product-specific choice. Use the barrier's weight feature deliberately instead of assuming a lightweight road-style obstacle will stay put in every location.\u003c\/p\u003e\u003ch2\u003eChoose Red or White for the visible setup\u003c\/h2\u003e\u003cp\u003eChoose between Red and White for the OC Skate Barrier. The color is part of the barrier's visible roadwork character, while the boardslide and lipslide role remains the practical reason to choose it. Match the selected color to the intended spot.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne OC Barrier in the selected color\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAdd stability or connect another barrier\u003c\/h3\u003e\u003cp\u003eThe 15-pound OC Barrier can be weighted with water, and multiple barriers can connect into a longer obstacle. Choose the Red or White barrier, then set the 40-inch-wide form securely for the intended arrangement.\u003c\/p\u003e\u003ch3\u003eQuestions about OC Skate Barrier\u003c\/h3\u003e\u003ch4\u003eHow does the OC Barrier compare with a fixed ledge?\u003c\/h4\u003e\u003cp\u003eThe Barrier offers a Jersey-style body that can stand alone or connect with another unit, while a fixed ledge provides a defined working edge and settled length. Choose the Barrier when its shape and modular growth matter more than owning a traditional rectangular box.\u003c\/p\u003e\u003ch4\u003eWho benefits most from starting with one Barrier and expanding later?\u003c\/h4\u003e\u003cp\u003eA buyer who wants to test the single 40-inch form before building a longer connected feature benefits from the modular path. Start with one only if it is useful by itself. Expansion should follow real use and available room, not an assumption that more units are automatically better.\u003c\/p\u003e\u003ch4\u003eWhen does the water-fill feature create an ownership tradeoff?\u003c\/h4\u003e\u003cp\u003eWater adds settling weight after placement but makes movement and storage less convenient until it is managed. That tradeoff matters when the setup changes often. Choose the fillable Barrier when added stability is useful and the owner has a practical routine for relocating or storing it.\u003c\/p\u003e\u003ch4\u003eHow can riders use the OC Skate Barrier?\u003c\/h4\u003e\u003cp\u003eUse the OC Skate Barrier as a street-inspired obstacle for line planning, approach control, and tricks that match its exact shape. Start by rolling past or over the feature, then add suitable ollies, taps, slides, or grinds only where the product geometry supports them.\u003c\/p\u003e\u003ch4\u003eCan I return the OC Skate Barrier if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/road-series\"\u003eExplore the Road Series\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Red","offer_id":39502512062647,"sku":"Barrier_red","price":129.0,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":39502512095415,"sku":"Barrier_offwhite","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/JerseyBarrier11.jpg?v=1729241276"},{"product_id":"caution-skateboarding","title":"Caution Skate Obstacle: Skateboarding Sign","description":"  \u003cp\u003e\u003cstrong\u003eA light caution sign that changes the visual language of a spot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Caution Skateboarding Sign is a 2-foot-tall plastic obstacle with an 11.5-inch base and a weight of 2 pounds. It is for riders who want a portable road-sign target that can add a visual cue or simple obstacle without committing to a large ramp.\u003c\/p\u003e\u003ch2\u003eA caution sign made for a skate setting\u003c\/h2\u003e\u003cp\u003eThe Caution Skateboarding Sign brings road-sign language into the setup without adding another ramp or rail. Its 2-foot height gives it a clear visual presence. It works best when a lightweight, sign-shaped target makes more sense than a permanent wood obstacle.\u003c\/p\u003e\u003ch2\u003eAn 11.5-inch base keeps the footprint small\u003c\/h2\u003e\u003cp\u003eThe Caution Skateboarding Sign has an 11.5-inch base, so its product footprint is compact. That small base does not create a full riding area by itself. Leave clear pavement around the sign and place it where it cannot shift into another feature's path.\u003c\/p\u003e\u003ch2\u003eTwo pounds changes how it is used\u003c\/h2\u003e\u003cp\u003eAt a weight of 2 pounds, the Caution Skateboarding Sign is much lighter than a ramp, rail, or ledge. Its value is easy repositioning and visual variety. Stable placement still matters, because a lightweight sign should not become an unpredictable moving object.\u003c\/p\u003e\u003ch2\u003ePlastic construction serves the sign role\u003c\/h2\u003e\u003cp\u003eThe Caution Skateboarding Sign uses plastic construction, which matches its sign-style identity. That material and the low weight make it a different purchase from a structural plywood obstacle. Pick it for the roadwork visual and portable role it actually provides.\u003c\/p\u003e\u003ch2\u003eStore a full-height target in a small footprint\u003c\/h2\u003e\u003cp\u003eThe two-foot sign supplies a visible target without the storage demand of a wood ramp or long rail. Its 11.5-inch base and plastic build suit a garage or vehicle where space is tight, as long as the lightweight obstacle is reset securely before every session.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Caution Skateboarding sign obstacle\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eSet the lightweight sign for each session\u003c\/h3\u003e\u003cp\u003eAt two pounds, the plastic Caution Skateboarding Sign is easy to reposition. Set the 11.5-inch base flat and clear of other traffic before each session so the portable target stays where the rider expects it.\u003c\/p\u003e\u003ch3\u003eQuestions about Caution Skate Obstacle: Skateboarding Sign\u003c\/h3\u003e\u003ch4\u003eHow does the Caution Skate Obstacle: Skateboarding Sign differ from the A-Frame Construction Sign?\u003c\/h4\u003e\u003cp\u003eThe Caution sign is the lighter, smaller option: it is two feet tall, weighs two pounds, and uses plastic construction. The A-Frame is a larger 40-inch, 25-pound obstacle. Choose the Caution sign for an easily moved target and visual accent.\u003c\/p\u003e\u003ch4\u003eIs this sign meant to replace a wood ramp or metal rail?\u003c\/h4\u003e\u003cp\u003eNo. It adds a compact visible target and roadwork character, not a long riding surface or continuous grind edge. It works best when the session needs a small movable obstacle instead of another structural ramp, ledge, or rail competing for permanent space.\u003c\/p\u003e\u003ch4\u003eCan the Caution Skateboarding Sign support drills or filming as well as riding?\u003c\/h4\u003e\u003cp\u003eYes. Its visible road-sign form can mark a target, frame a repeated attempt, or add a recognizable object to a filmed session. Keep it secured for each use. The value is a clear movable cue, not the structural working surface supplied by a ramp or rail.\u003c\/p\u003e\u003ch4\u003eHow can riders use the Caution Skate Obstacle: Skateboarding Sign?\u003c\/h4\u003e\u003cp\u003eUse the Caution Skate Obstacle: Skateboarding Sign as a street-inspired obstacle for line planning, approach control, and tricks that match its exact shape. Start by rolling past or over the feature, then add suitable ollies, taps, slides, or grinds only where the product geometry supports them.\u003c\/p\u003e\u003ch4\u003eCan I return the Caution Skate Obstacle: Skateboarding Sign if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/road-series\"\u003eSee more Road Series obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39502513504439,"sku":"caution","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/CautionSign3.jpg?v=1729241275"},{"product_id":"a-frame-construction","title":"A-Frame Skate Obstacle: Construction Sign","description":"  \u003cp\u003e\u003cstrong\u003eA roadwork shape with a real place in the session\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe A-Frame Construction Sign turns a familiar roadwork silhouette into a portable skate obstacle. Its compact 25-pound build, 40-inch height, and outdoor-use materials make it a choice for riders who want a visible target that feels different from another ramp, rail, or rectangular box.\u003c\/p\u003e\u003ch2\u003eA construction sign, not another ramp\u003c\/h2\u003e\u003cp\u003eThe A-Frame Construction Sign puts a familiar roadwork form in the setup instead of repeating a bank, rail, or ledge. At 40 inches high, it reads as a tall visual target as well as an obstacle. The right fit is a setup where that distinct silhouette is what the session is missing.\u003c\/p\u003e\u003ch2\u003eMap its 39-by-28-inch footprint\u003c\/h2\u003e\u003cp\u003eThe A-Frame Construction Sign is 39 inches wide and 28 inches deep. Those dimensions describe the obstacle itself, while the approach and exit need their own clear pavement. Mark its position on the actual surface so the road-sign shape does not crowd a narrow driveway.\u003c\/p\u003e\u003ch2\u003eMove it as a 25-pound feature\u003c\/h2\u003e\u003cp\u003eAt 25 pounds, the A-Frame Construction Sign is portable and lightweight. That makes it better suited to a setup that changes between sessions than a heavy permanent feature. Once placed, give it a stable resting position rather than treating portability as permission for a loose obstacle.\u003c\/p\u003e\u003ch2\u003eUse outdoor materials in the right setting\u003c\/h2\u003e\u003cp\u003eThe materials are designed for outdoor use, which makes the A-Frame Construction Sign a fit for an outside spot. A level surface and regular care still matter. Outdoor-ready construction defines the intended setting; it does not make every placement or weather condition equal.\u003c\/p\u003e\u003ch2\u003eOne focused configuration keeps the decision simple\u003c\/h2\u003e\u003cp\u003eThe A-Frame Construction Sign comes in one current size and form, so there is no option maze to solve after choosing it. The real decision is whether its 40-inch roadwork shape, 25-pound handling, and compact base add the right challenge and character to the existing setup. If those facts do not fit, another obstacle is the better call.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne A-Frame Construction Road Series obstacle\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003ePlace the 25-pound sign securely\u003c\/h3\u003e\u003cp\u003eThe A-Frame Construction Sign is portable, but its 40-inch profile still needs level ground and a settled position before anyone skates around it. Move it between sessions, then keep the 39-by-28-inch base out of another obstacle's path.\u003c\/p\u003e\u003ch3\u003eQuestions about A-Frame Skate Obstacle: Construction Sign\u003c\/h3\u003e\u003ch4\u003eHow does the A-Frame Skate Obstacle: Construction Sign compare with the Caution Skateboarding Sign?\u003c\/h4\u003e\u003cp\u003eThe A-Frame is the larger, heavier roadwork obstacle at 40 inches high and 25 pounds. The Caution sign is a two-foot, two-pound plastic target. Choose the A-Frame when the setup can support a more substantial construction-sign form; choose Caution when very light handling and smaller storage matter more.\u003c\/p\u003e\u003ch4\u003eHow should rider experience affect the A-Frame decision?\u003c\/h4\u003e\u003cp\u003eThere is no useful universal skill label for a 40-inch roadwork-style obstacle. Compare the rider's control, the way the sign will be approached, and the available route around its 39-by-28-inch base. The right setup offers a deliberate next challenge without placing a tall target where the rider cannot use it comfortably.\u003c\/p\u003e\u003ch4\u003eWho should skip the A-Frame and choose a rail or ledge instead?\u003c\/h4\u003e\u003cp\u003eA rider who mainly wants a continuous working edge for grinds and slides should prioritize a rail or ledge. The A-Frame makes more sense when a tall roadwork-style target and strong visual identity add a genuinely different job to the existing obstacle mix.\u003c\/p\u003e\u003ch4\u003eHow can riders use the A-Frame Skate Obstacle: Construction Sign?\u003c\/h4\u003e\u003cp\u003eUse the A-Frame Skate Obstacle: Construction Sign as a street-inspired obstacle for line planning, approach control, and tricks that match its exact shape. Start by rolling past or over the feature, then add suitable ollies, taps, slides, or grinds only where the product geometry supports them.\u003c\/p\u003e\u003ch4\u003eCan I return the A-Frame Skate Obstacle: Construction Sign if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/road-series\"\u003eSee more Road Series obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39502513766583,"sku":"Aframe_sign","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/AFrameBarrier1.jpg?v=1729241278"},{"product_id":"skate-cones","title":"Skate Cones","description":"  \u003cp\u003e\u003cstrong\u003eA portable cone-and-bar target with four height settings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkate Cones include two cones and one 38-inch ollie bar in a seven-pound practice set. The bar can be set at 5, 9, 13, or 17 inches, making the product a compact choice for riders who want a visible adjustable target rather than a fixed ramp, rail, or ledge.\u003c\/p\u003e\u003ch2\u003eTwo cones and one 38-inch ollie bar\u003c\/h2\u003e\u003cp\u003eSkate Cones include two cones and one 38-inch ollie bar. Those parts create a compact, adjustable practice target instead of a fixed wood obstacle. Choose the set when a visible bar can add a focused objective to a session without requiring a large ramp footprint.\u003c\/p\u003e\u003ch2\u003eFour heights change the practice target\u003c\/h2\u003e\u003cp\u003eThe Skate Cones bar can be set at 5, 9, 13, or 17 inches. Those four positions let the same cone-and-bar set change as the target changes. The product is useful because height can be adjusted without buying a separate obstacle for each setting.\u003c\/p\u003e\u003ch2\u003eKeep the target span consistent\u003c\/h2\u003e\u003cp\u003eThe 38-inch bar fixes the distance between the two cones, so each height change keeps the same visible span. That consistency helps the rider compare attempts across the 5-, 9-, 13-, and 17-inch settings without moving to a wider or narrower target at the same time.\u003c\/p\u003e\u003ch2\u003eSeven pounds supports a changing session\u003c\/h2\u003e\u003cp\u003eAt 7 pounds, Skate Cones are easy to move as the session layout changes. That portability is part of the product's appeal. Set the cones and bar securely for each attempt so a lightweight practice target does not become an unpredictable object.\u003c\/p\u003e\u003ch2\u003eOne complete set, without a second configuration\u003c\/h2\u003e\u003cp\u003eThe current Skate Cones product is one seven-pound set with two cones and a 38-inch bar. The challenge changes through the four bar positions, not through a separate size, color, or material selector. Choose the set when that exact adjustable target solves the practice job; compare another obstacle when a different working surface is needed.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo skate cones\u003c\/li\u003e\n\u003cli\u003eOne 38-inch ollie bar with 5-, 9-, 13-, and 17-inch height settings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eSet one of four bar heights\u003c\/h3\u003e\u003cp\u003ePlace the 38-inch ollie bar at 5, 9, 13, or 17 inches, then make sure both cones sit securely. The seven-pound set is easy to move when the practice target changes.\u003c\/p\u003e\u003ch3\u003eQuestions about Skate Cones\u003c\/h3\u003e\u003ch4\u003eHow do Skate Cones compare with a compact Wedge Bump?\u003c\/h4\u003e\u003cp\u003eSkate Cones create an adjustable horizontal target using a 38-inch bar and four height settings. A Wedge Bump is a structural takeoff that launches the rider from a plywood ramp face. Choose the cones for a movable practice goal; choose the wedge when the setup needs an actual launch surface.\u003c\/p\u003e\u003ch4\u003eHow do Skate Cones compare with the Caution Skateboarding Sign?\u003c\/h4\u003e\u003cp\u003eSkate Cones use a bar between two cones to create a horizontal target that changes height. The Caution sign is one fixed two-foot plastic roadwork object. Choose the cones when adjustable bar practice is the goal; choose the sign when a compact vertical target and visual obstacle fit the session better.\u003c\/p\u003e\u003ch4\u003eWhen is Starter Package 1 a better starting point than Skate Cones?\u003c\/h4\u003e\u003cp\u003eSkate Cones are one seven-pound adjustable target for a rider who already has the rest of the session covered. Starter Package 1 adds a complete skateboard, two Wedge Bumps, and a Roll-On Rail. Choose the package when the buyer needs a broader first setup, not only a movable bar target.\u003c\/p\u003e\u003ch4\u003eHow can skaters use the Skate Cones?\u003c\/h4\u003e\u003cp\u003eUse the cones for slalom lines, turning drills, approach markers, or ollie practice. Adjust the included bar to create a visible clearance goal that matches the rider's current ability, then raise it gradually as consistency improves.\u003c\/p\u003e\u003ch4\u003eCan I return the Skate Cones if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/road-series\"\u003eSee more Road Series obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39502561116343,"sku":"skate_cones","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/Cones1.jpg?v=1729241277"},{"product_id":"wedge-bump-ramp","title":"Wedge Bump Skate Ramp","description":"  \u003cp\u003e\u003cstrong\u003eA compact 12-inch wedge for building a launch point\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Wedge Bump Skate Ramp is a 12-inch-high, 38-inch-wide, four-foot-long launch feature weighing 45 pounds and a drill-based 20-to-40-minute build. It is for a rider who needs a compact rise to connect gaps, rails, boxes, or other obstacles in a changing setup.\u003c\/p\u003e\u003ch2\u003eA 12-inch rise creates a compact launch\u003c\/h2\u003e\u003cp\u003eThe Wedge Bump Skate Ramp measures 12 inches high. That rise creates a straightforward launch point without requiring a large bank. It earns its place when a compact wedge can connect a gap, rail, box, or another obstacle in the planned session.\u003c\/p\u003e\u003ch2\u003eThirty-eight inches wide and four feet long\u003c\/h2\u003e\u003cp\u003eThe Wedge Bump is 38 inches wide and 4 feet long. Those dimensions keep the ramp compact, but the run-in and exit still need clear pavement. Place the wedge where its short body can support a useful route instead of sitting in a crowded corner.\u003c\/p\u003e\u003ch2\u003eForty-five pounds favors a stable launch point\u003c\/h2\u003e\u003cp\u003eAt 45 pounds, the Wedge Bump is lighter than a large bank yet substantial enough to deserve a stable location. It can be repositioned with planning. Once placed, make sure the compact launch point does not shift during the session.\u003c\/p\u003e\u003ch2\u003ePlan 20 to 40 minutes with a drill\u003c\/h2\u003e\u003cp\u003eThe Wedge Bump Skate Ramp calls for a drill and roughly 20 to 40 minutes of assembly. That is a focused build commitment for a compact ramp. Organize the parts, follow the instructions, and inspect the completed wedge on level pavement.\u003c\/p\u003e\u003ch2\u003eMove the takeoff when the session changes\u003c\/h2\u003e\u003cp\u003eAt 45 pounds and four feet long, the Wedge Bump can shift from a rail approach to a gap or box route with deliberate handling. One compact takeoff can support several arrangements, giving the rider room to rebuild the session without committing the wedge to one permanent position.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Wedge Bump Ramp\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAssembly details\u003c\/h3\u003e\u003cp\u003eFor Wedge Bump Skate Ramp, assembly is estimated at 20-40 minutes and the tools are drill. Follow the product instructions for the exact kit.\u003c\/p\u003e\u003ch3\u003eQuestions about Wedge Bump Skate Ramp\u003c\/h3\u003e\u003ch4\u003eHow does the Wedge Bump differ from the GB Kicker?\u003c\/h4\u003e\u003cp\u003eThe Wedge Bump stands 12 inches high and is 38 inches wide, creating a broader compact launch. The GB Kicker is nine inches high and 19 inches wide to match a Grind Box. Choose the Wedge for general connections and the GB for that specific pairing.\u003c\/p\u003e\u003ch4\u003eWho should choose a Wedge Bump instead of a full Bank Ramp?\u003c\/h4\u003e\u003cp\u003eChoose the Wedge Bump when a compact four-foot connector can link gaps, rails, or boxes and the layout needs to stay flexible. Choose the eight-foot-wide Bank when a broad, substantial bank face should anchor a dedicated spot as opposed to move around it.\u003c\/p\u003e\u003ch4\u003eHow does the Wedge Bump compare with Jordan Hoffart's Speed Bump?\u003c\/h4\u003e\u003cp\u003eThe Wedge Bump is a compact four-foot takeoff and connector. The Speed Bump is a broader eight-foot signed feature intended to carry more of the route. Choose the Wedge for flexibility and the Speed Bump when the larger shape deserves a settled role.\u003c\/p\u003e\u003ch4\u003eHow can riders use the Wedge Bump Skate Ramp?\u003c\/h4\u003e\u003cp\u003eUse the Wedge Bump Skate Ramp as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Wedge Bump Skate Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003elaunch ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39508545372343,"sku":"wedge\/bump","price":319.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/wedge3.jpg?v=1729241276"},{"product_id":"bank-skateboard-ramp","title":"Bank Skateboard Ramp","description":"  \u003cp\u003e\u003cstrong\u003eA substantial bank for a dedicated outdoor spot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Bank Skateboard Ramp is a large 8-foot-wide bank with rear caster wheels, outdoor-use materials, and a two-quart Skate Paint requirement. It suits a rider planning a permanent-feeling session feature that can still be repositioned deliberately when the spot needs to change.\u003c\/p\u003e\u003ch2\u003eAn 8-foot bank with real scale\u003c\/h2\u003e\u003cp\u003eThe Bank Skateboard Ramp is 8 feet wide, 7 feet 5 inches deep, and 3 feet 2 inches high. This is a substantial footprint, not a compact driveway add-on. Pick the location by mapping the bank, approach, and exit together on the pavement.\u003c\/p\u003e\u003ch2\u003eRear casters help with planned moves\u003c\/h2\u003e\u003cp\u003eAt 350 pounds, the Bank Skateboard Ramp is not a casual carry-around feature. Rear caster wheels give it a way to be repositioned when the setup changes. Use that mobility for deliberate placement, then settle the ramp securely before the session starts.\u003c\/p\u003e\u003ch2\u003eReserve a real build window\u003c\/h2\u003e\u003cp\u003eThe Bank Skateboard Ramp calls for a drill and wrench, with an estimated assembly time of two to three hours. Treat that as a project with room to organize parts and inspect the finished ramp. The bank is most rewarding when the build receives the same attention as its placement.\u003c\/p\u003e\u003ch2\u003eKeep the Bank's surface roles straight\u003c\/h2\u003e\u003cp\u003eThe Bank Skateboard Ramp supplies exposed plywood and specifies two quarts of Skate Paint for that wood. Skatelite Pro does not come with the Bank and is not an order choice. Plywood forms the supplied riding face, Skate Paint coats it, and any separately purchased surface panel needs its own compatibility, cut, seam, and quantity plan.\u003c\/p\u003e\u003ch2\u003eChoose the straight bank shape for the way it rides\u003c\/h2\u003e\u003cp\u003eA bank uses a straight inclined face, while a quarter pipe curves through a transition. That difference changes the movement riders repeat even before size enters the conversation. The Bank Skateboard Ramp makes sense when a broad straight face is the feature the site needs and the rider wants that incline to anchor a dedicated route.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Bank Skateboard Ramp\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAssembly details\u003c\/h3\u003e\u003cp\u003eFor Bank Skateboard Ramp, assembly is estimated at 2-3 hours and the tools are drill and wrench. Follow the product instructions for the exact kit.\u003c\/p\u003e\u003ch3\u003eQuestions about Bank Skateboard Ramp\u003c\/h3\u003e\u003ch4\u003eHow is the Bank Skateboard Ramp different from a compact Wedge Bump?\u003c\/h4\u003e\u003cp\u003eThe Bank is a full eight-foot-wide, 350-pound ramp built for a substantial dedicated spot. A Wedge Bump is a much smaller connector or launch point. Choose the Bank when a broad bank face is the primary feature, not an accessory between other obstacles.\u003c\/p\u003e\u003ch4\u003eCan I choose a different Bank Skateboard Ramp size at checkout?\u003c\/h4\u003e\u003cp\u003eNo. The Bank is offered as one 8-foot-wide, 7-foot-5-inch-deep, 3-foot-2-inch-high configuration. Confirm that complete ramp body, plus its run-in and roll-away, fits before ordering. If the site needs a smaller footprint, compare a different ramp instead of expecting a Bank size selector.\u003c\/p\u003e\u003ch4\u003eHow does the Bank Skateboard Ramp compare with Launch WR?\u003c\/h4\u003e\u003cp\u003eThe Bank is an eight-foot-wide, 350-pound ramp with one broad straight face. Launch WR is a compact two-foot-wide obstacle with separate launch and wallie faces. Choose the Bank when a substantial straight incline should anchor the site; choose Launch WR when two smaller working faces and planned movement better fit the session.\u003c\/p\u003e\u003ch4\u003eHow can riders use the Bank Skateboard Ramp?\u003c\/h4\u003e\u003cp\u003eUse the Bank Skateboard Ramp as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Bank Skateboard Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003elaunch ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39508551467191,"sku":"The Bank","price":1269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/OCramps_RawRamp_3.jpg?v=1729241276"},{"product_id":"launch-wr","title":"Launch WR Skate Ramp","description":"  \u003cp\u003e\u003cstrong\u003eA compact ramp with a launch side and a wallie side\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Launch WR Skate Ramp is a portable, 15-inch-high, two-foot-wide obstacle that measures 52 inches long. With a drill and an estimated one-hour build, a one-quart Skate Paint requirement, and two distinct sides, it is for riders choosing launch and wallie options within one compact ramp format.\u003c\/p\u003e\u003ch2\u003eLaunch and wallie sides in one ramp\u003c\/h2\u003e\u003cp\u003eLaunch WR gives the rider a launch side and a wallie side within one compact obstacle. That two-sided role is why it differs from a plain kicker. The right fit is a setup where one 15-inch ramp needs to support two distinct targets in the same setup.\u003c\/p\u003e\u003ch2\u003eA two-foot width and 52-inch length\u003c\/h2\u003e\u003cp\u003eThe Launch WR measures 2 feet wide and 52 inches long. Those dimensions make the ramp compact, but they do not include the approach and exit. Give both sides usable pavement so the launch and wallie choices remain genuinely available.\u003c\/p\u003e\u003ch2\u003eMove it when the setup changes\u003c\/h2\u003e\u003cp\u003eLaunch WR is built to move between sessions, which helps when one compact obstacle needs to serve more than one arrangement. Carry and reposition the completed ramp deliberately, then settle both working faces on level pavement so the launch and wallie approaches remain stable and open.\u003c\/p\u003e\u003ch2\u003ePlan one hour with a drill\u003c\/h2\u003e\u003cp\u003eLaunch WR calls for a drill and an estimated one hour of assembly. That is a real build task for a two-sided ramp. Reserve the time, keep the parts and instructions together, and inspect the completed obstacle on level pavement.\u003c\/p\u003e\u003ch2\u003eOne quart protects the exposed plywood\u003c\/h2\u003e\u003cp\u003eThe Launch WR specifies one quart of Skate Paint for exposed plywood. That finish choice belongs to this compact launch-and-wallie ramp. Use it as part of the wood-care plan, separate from the decision about which of the two riding sides suits the session.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Launch WR ramp with galvanized-steel coping\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eAssembly details\u003c\/h3\u003e\u003cp\u003eLaunch WR has an estimated one-hour assembly window and requires a drill. Once built, preserve a clear lane to both the launch and wallie faces instead of treating it as a one-way kicker.\u003c\/p\u003e\u003ch3\u003eQuestions about Launch WR Skate Ramp\u003c\/h3\u003e\u003ch4\u003eHow does the Launch WR Skate Ramp compare with the GB Kicker?\u003c\/h4\u003e\u003cp\u003eLaunch WR is a 15-inch obstacle with separate launch and wallie faces. The GB Kicker is a lower, narrower ramp designed to align with an OC Ramps Grind Box. Choose Launch WR when two distinct faces add useful variety; choose the GB Kicker when a compact Grind Box approach is the actual job.\u003c\/p\u003e\u003ch4\u003eHow does Launch WR compare with the Bank Skateboard Ramp?\u003c\/h4\u003e\u003cp\u003eLaunch WR is a portable two-foot-wide obstacle with launch and wallie faces. The Bank is an eight-foot-wide, 350-pound ramp meant for a much more substantial position. Choose Launch WR for compact variety and planned movement; choose the Bank when a broad straight face should anchor the site.\u003c\/p\u003e\u003ch4\u003eWho should compare Launch WR with the Micro Spine?\u003c\/h4\u003e\u003cp\u003eCompare them when two usable faces are important. Launch WR pairs a launch face with a wallie face, while Micro Spine uses two back-to-back transition faces. Choose the type of direction change the rider wants instead of assuming every two-sided obstacle serves the same practice.\u003c\/p\u003e\u003ch4\u003eHow can riders use the Launch WR Skate Ramp?\u003c\/h4\u003e\u003cp\u003eUse the Launch WR Skate Ramp as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Launch WR Skate Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/launch-ramps\"\u003elaunch ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":39508553367735,"sku":"LaunchWR","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/LaunchWR03.jpg?v=1729241277"},{"product_id":"quarter-pipe-ramp-6-foot-wide","title":"6 Foot Wide Quarter Pipe Ramp","description":"  \u003cp\u003e\u003cstrong\u003eSix feet across the transition\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 6 Foot Wide Quarter Pipe Ramp is for a home setup ready to give its transition more room across the coping while keeping the option to move it later. Two plywood riding layers and rear caster wheels make it a practical middle ground between compact placement and a broader session.\u003c\/p\u003e\u003ch2\u003eGive six feet of coping a clear approach\u003c\/h2\u003e\u003cp\u003eThis quarter pipe is 3 feet 2 inches tall, 6 feet wide, 6 feet 5 inches deep, and 215 pounds. The added width matters only when the space leaves a proper path into and away from the transition. Use the finished dimensions to choose a position that makes the broad coping feel inviting instead of boxed in.\u003c\/p\u003e\u003ch2\u003eChoose the middle width for more room to work\u003c\/h2\u003e\u003cp\u003eSix feet across gives the rider more span at the coping than a compact quarter pipe without moving into the eight-foot model. It is a good choice when the session needs a broader target but the site still has practical limits. Let the usable approach determine whether this middle width is truly the right fit.\u003c\/p\u003e\u003ch2\u003eKeep two plywood layers and paint distinct\u003c\/h2\u003e\u003cp\u003eTwo plywood riding layers are included. The optional two-quart Skate Paint selection protects exposed plywood; GatorSkins and Skatelite Pro are not available surface choices for this ramp. Choose paint only for exposed wood and keep the layered-plywood build in view.\u003c\/p\u003e\u003ch2\u003eUse the two-to-three-hour build plan\u003c\/h2\u003e\u003cp\u003eAssembly calls for a drill, a wrench, and about two to three hours. The pre-cut boards and photo instructions reduce guesswork if parts and hardware are organized before work begins. Give the transition a level foundation, then check its connections and wheel area before rolling it into its planned position.\u003c\/p\u003e\u003ch2\u003eMove the ramp without losing the session\u003c\/h2\u003e\u003cp\u003eRear caster wheels help shift the six-foot ramp for storage or a changed room layout. The important decision is whether the space has a clear route for that movement. Plan the ramp's working position and its off-session position together, so mobility becomes part of a usable routine rather than an afterthought.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne 6-foot-wide quarter pipe ramp in the selected Skate Paint configuration\u003c\/li\u003e\n\u003cli\u003eExterior-grade lumber and plywood parts\u003c\/li\u003e\n\u003cli\u003ePre-counted rust-resistant screws and required galvanized metal parts\u003c\/li\u003e\n\u003cli\u003ePre-cut and pre-drilled boards with computer-cut transition pieces\u003c\/li\u003e\n\u003cli\u003ePhoto instruction booklet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping to the contiguous U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003e6 Foot Wide Quarter Pipe Ramp freight delivery\u003c\/h3\u003e\u003cp\u003eThe kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.\u003c\/p\u003e\u003ch3\u003eAssembly planning\u003c\/h3\u003e\u003cp\u003eAssembly uses a drill and wrench and takes about 2 to 3 hours. Build on a level foundation with the required tools and follow the photo instructions.\u003c\/p\u003e\u003ch3\u003eQuestions about 6 Foot Wide Quarter Pipe Ramp\u003c\/h3\u003e\u003ch4\u003eHow does the 6 Foot Wide Quarter Pipe Ramp compare with the four-foot model?\u003c\/h4\u003e\u003cp\u003eBoth models are 3 feet 2 inches tall and 6 feet 5 inches deep. The six-foot ramp provides two more feet across the coping and weighs 215 pounds, while the four-foot ramp weighs 175 pounds. Both use rear casters. Choose four feet when the narrower approach and lighter move suit the site; choose six when the riders will use the added coping span.\u003c\/p\u003e\u003ch4\u003eWhen should I choose one 6 Foot Wide Quarter Pipe Ramp instead of the pair?\u003c\/h4\u003e\u003cp\u003eThe single ramp gives the site one 215-pound transition and one approach to plan. The Pair of 6 Foot Quarter Pipe Ramps supplies two complete 216-pound transitions that can face each other or serve separate approaches. Choose one when a single broad turn or launch point completes the setup. Choose the pair only when the property can preserve usable approach, exit, movement, and storage space for both ramps.\u003c\/p\u003e\u003ch4\u003eHow does the standard 6 Foot Wide Quarter Pipe Ramp differ from the Unicorn Quarter Pipe Ramp?\u003c\/h4\u003e\u003cp\u003eBoth are six feet wide, 6 feet 5 inches deep, and movable on rear wheels. The standard ramp is 3 feet 2 inches tall, weighs 215 pounds, and offers two quarts of Skate Paint. The Unicorn is 2 feet 6 inches tall, weighs 185 pounds, carries its engraved graphic and shown colors, and offers one quart of paint. Choose transition geometry first, then product identity.\u003c\/p\u003e\u003ch4\u003eWhat can riders practice on the 6 Foot Wide Quarter Pipe Ramp?\u003c\/h4\u003e\u003cp\u003eUse the 6 Foot Wide Quarter Pipe Ramp for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the 6 Foot Wide Quarter Pipe Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/quarter-pipes\"\u003eCompare Quarter Pipe Ramps\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":39607729062071,"sku":"Q6","price":1049.0,"currency_code":"USD","in_stock":true},{"title":"2 Quarts","offer_id":39607729094839,"sku":"Q6+2xQuarts","price":1207.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/quart-6-wide-4-1.jpg?v=1729241386"},{"product_id":"es-shoe-box-skate-ledge","title":"éS Shoe Box Skate Ledge","description":"  \u003cp\u003e\u003cstrong\u003eA full-size shoe shape with two long coping edges\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe éS Shoe Box Skate Ledge turns a recognizable shoe silhouette into a 15.5-inch-high, four-foot-wide obstacle with rust-free coping along both eight-foot sides. It is for a rider who wants a substantial street-style ledge with a shape that is unmistakably not another rectangle.\u003c\/p\u003e\u003ch2\u003eA shoe-box silhouette at ledge scale\u003c\/h2\u003e\u003cp\u003eThe éS Shoe Box Skate Ledge uses a life-size shoe shape as opposed to a standard rectangular box. At 15.5 inches high, it has real ledge scale beneath that recognizable profile. Pick it when the form itself should add a distinctive street-style object to the spot.\u003c\/p\u003e\u003ch2\u003eTwo eight-foot coping edges create options\u003c\/h2\u003e\u003cp\u003eRust-free coping runs along both eight-foot sides of the éS Shoe Box Skate Ledge. That gives the obstacle two long working edges within one shoe-shaped body. The double-sided layout is the reason to compare it with a single-edge ledge, not merely its graphic identity.\u003c\/p\u003e\u003ch2\u003eA four-foot-wide body needs honest placement\u003c\/h2\u003e\u003cp\u003eThe éS Shoe Box Skate Ledge measures 4 feet wide and 8 feet long. Those dimensions create a substantial obstacle footprint. Place it with enough open pavement around each coping side so the shoe form does not leave riders trapped against another feature.\u003c\/p\u003e\u003ch2\u003eOutdoor materials support the outside setup\u003c\/h2\u003e\u003cp\u003eThe éS Shoe Box Skate Ledge uses materials designed for outdoor use. Stable placement and regular care still matter for a full-size ledge, especially when both coping sides need to remain open. The exterior material fit supports the intended setting without making the obstacle maintenance-free.\u003c\/p\u003e\u003ch2\u003eSkip the build and start with final placement\u003c\/h2\u003e\u003cp\u003eThe éS Shoe Box arrives assembled, so the real day-one work is moving the full-size obstacle into a level position that keeps both coping edges usable. That ready-to-place format favors a buyer who wants a finished signature ledge without turning the first session into a kit build.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne éS Shoe Box Skate Ledge\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eArrives assembled and ready to place\u003c\/h3\u003e\u003cp\u003eThe éS Shoe Box Skate Ledge requires no assembly. Reserve level space for its four-by-eight-foot body and keep both coping sides open before the assembled obstacle is moved into its final position.\u003c\/p\u003e\u003ch3\u003eQuestions about éS Shoe Box Skate Ledge\u003c\/h3\u003e\u003ch4\u003eHow does the éS Shoe Box compare with the HUF Shoe Box Ledge?\u003c\/h4\u003e\u003cp\u003eThe two ledges share a 15.5-inch height, four-foot width, eight-foot length, and coping along both long sides. Choose the éS version when its branded shoe silhouette is the one the rider wants as a permanent centerpiece. The working footprint does not settle that visual decision for you.\u003c\/p\u003e\u003ch4\u003eWhy choose the éS shoe shape instead of a plain Grind Box?\u003c\/h4\u003e\u003cp\u003eThe full-size éS silhouette adds a recognizable street-style object while the two coping sides supply the working edges. A Grind Box is simpler and available in multiple lengths. Choose the shoe form only when its character adds real value to the obstacle mix.\u003c\/p\u003e\u003ch4\u003eWhen is a one-edge ledge a better fit than the éS Shoe Box?\u003c\/h4\u003e\u003cp\u003eChoose a one-edge ledge when the site cannot keep both long sides open or when a narrower footprint is more useful. Choose the éS Shoe Box when riders will genuinely use both coping edges and the full branded silhouette adds enough character to justify its scale.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the éS Shoe Box Skate Ledge?\u003c\/h4\u003e\u003cp\u003eUse the éS Shoe Box Skate Ledge for ledge skills such as 50-50 grinds, boardslides, noseslides, and ollies on or off the obstacle. Where the top and geometry support it, riders can also work on manuals and nose manuals.\u003c\/p\u003e\u003ch4\u003eCan I return the éS Shoe Box Skate Ledge if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/grind-boxes\"\u003egrind boxes and ledges\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":40656203612343,"sku":"eSBox","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/es-box_web_750x750_2.jpg?v=1632770522"},{"product_id":"jack-o-quarterpipe","title":"Jack-O Quarter Pipe Ramp","description":"  \u003cp\u003e\u003cstrong\u003eA compact quarter pipe with a Halloween grin\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Jack-O Quarter Pipe brings a seasonal graphic to a compact home transition. It is a choice for a rider who wants a recognizable piece of the setup with enough real ramp underneath it to turn, launch, and revisit through a short garage or backyard session.\u003c\/p\u003e\u003ch2\u003eKeep the compact footprint usable\u003c\/h2\u003e\u003cp\u003eThe Jack-O Quarter Pipe is 2 feet tall, 3 feet 2 inches wide, 4 feet deep, and 70 pounds. It can fit a smaller home area, but the session still needs room before and after the transition. Check the available approach and roll-away before making a graphic ramp compete with storage or foot traffic.\u003c\/p\u003e\u003ch2\u003eChoose the Halloween graphic on purpose\u003c\/h2\u003e\u003cp\u003eThe Jack-O graphic is part of this specific quarter pipe and gives the two-foot transition its seasonal identity. It is not a generic color treatment applied to any ramp. Choose it when the graphic belongs in the setup, while keeping the compact transition's practical job clear: a nearby place to turn and work the coping.\u003c\/p\u003e\u003ch2\u003eBuy the Jack-O finish as shown\u003c\/h2\u003e\u003cp\u003eThe Jack-O Quarter Pipe is offered with the seasonal graphic and plywood build shown here. It has no separate Skate Paint option, so paint is not another finish choice on this model. The relevant decision is the shown Jack-O graphic on a compact two-foot transition, not an added surface package.\u003c\/p\u003e\u003ch2\u003eBuild the seasonal ramp with a drill\u003c\/h2\u003e\u003cp\u003eSet aside about 30 to 45 minutes and bring a drill. Pre-cut and pre-drilled boards, counted hardware, and photo instructions turn the kit into a short, defined build. Set up on a level foundation and unpack carefully so the graphic-specific pieces stay protected until the ramp is assembled.\u003c\/p\u003e\u003ch2\u003eMake a small ramp part of the routine\u003c\/h2\u003e\u003cp\u003eA compact two-foot transition works best when it is easy to roll up to repeatedly, not hidden behind other obstacles. Put the Jack-O ramp in a place with a clear return route. Any later addition should bring a different skating job and keep the ramp's approach open.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne Jack-O Quarter Pipe kit\u003c\/li\u003e\n\u003cli\u003eExterior-grade lumber and plywood parts\u003c\/li\u003e\n\u003cli\u003ePre-counted rust-resistant screws and required galvanized metal parts\u003c\/li\u003e\n\u003cli\u003ePre-cut and pre-drilled boards with computer-cut transition pieces\u003c\/li\u003e\n\u003cli\u003ePhoto instruction booklet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping to the contiguous U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eBoxed kit delivery\u003c\/h3\u003e\u003cp\u003eThe kit arrives packaged for assembly. Keep the components together, inspect the shipment when it arrives, and report any visible damage promptly.\u003c\/p\u003e\u003ch3\u003eAssembly planning\u003c\/h3\u003e\u003cp\u003eAssembly uses a drill and takes about 30 to 45 minutes. Build on a level foundation with the required tools and follow the photo instructions.\u003c\/p\u003e\u003ch3\u003eQuestions about Jack-O Quarter Pipe Ramp\u003c\/h3\u003e\u003ch4\u003eHow does the Jack-O compare with the standard 3 Foot Wide Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eBoth use a compact two-foot-tall, 3-foot-2-inch-wide, four-foot-deep geometry. The Jack-O weighs 70 pounds and keeps its fixed seasonal graphic with no separate Skate Paint choice. The standard model weighs approximately 68 to 70 pounds and offers plywood or Skatelite with optional paint for exposed wood. Choose graphic identity or surface flexibility.\u003c\/p\u003e\u003ch4\u003eCan the Jack-O Quarter Pipe stay in the setup after Halloween?\u003c\/h4\u003e\u003cp\u003eYes. Halloween defines the graphic, not an expiration date for the ramp. Its two-foot transition, coping, and compact footprint continue to serve the same skating job after the season ends. Choose it only if you want the fixed Jack-O artwork to remain part of the setup year-round.\u003c\/p\u003e\u003ch4\u003eWhat should I plan if the Jack-O Quarter Pipe must move between sessions?\u003c\/h4\u003e\u003cp\u003eThe Jack-O Quarter Pipe weighs 70 pounds. Choose its skating and storage positions before the build, keep the movement route clear, and plan appropriate help if the ramp must change locations. Its compact size helps with placement, but the approach and roll-away still need to remain open wherever the seasonal graphic ramp is set.\u003c\/p\u003e\u003ch4\u003eWhat can riders practice on the Jack-O Quarter Pipe Ramp?\u003c\/h4\u003e\u003cp\u003eUse the Jack-O Quarter Pipe Ramp for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Jack-O Quarter Pipe Ramp if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/quarter-pipes\"\u003eCompare Quarter Pipe Ramps\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":40753159307447,"sku":"halloween_quarterpipe_orange","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/img-jack-o-quarterpipe.jpg?v=1694564338"},{"product_id":"american-flag-quarterpipe-3ft","title":"American Flag Quarter Pipe Ramp - 3 Foot Wide","description":"  \u003cp\u003e\u003cstrong\u003eA compact quarter pipe that flies the flag\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe American Flag Quarter Pipe puts a recognizable graphic on a small, usable transition. It is built for a garage or backyard that needs one approachable place to turn, launch, and work the coping without pretending to be a whole park. The flag artwork is part of the product, not a generic decoration added afterward.\u003c\/p\u003e\u003ch2\u003eGive a compact transition a real footprint\u003c\/h2\u003e\u003cp\u003eThis ramp is 2 feet tall, 3 feet 2 inches wide, 4 feet deep, and 70 pounds. Its compact scale makes placement possible in smaller home spaces, but it still needs an approach and exit that are not blocked by storage or walls. Measure the skating area, not just the rectangle under the ramp.\u003c\/p\u003e\u003ch2\u003eLet the flag graphic be the reason\u003c\/h2\u003e\u003cp\u003eThe American Flag graphic is the defining finish of this exact quarter pipe. Choose it when that visual identity belongs in the setup, not because a generic quarter pipe happens to fit the same space. The two-foot transition keeps the feature approachable while the graphic keeps it unmistakably its own.\u003c\/p\u003e\u003ch2\u003eOrder the graphic as it is offered\u003c\/h2\u003e\u003cp\u003eThis graphic quarter pipe is offered without a separate Skate Paint option. That means the purchase decision is the American Flag ramp shown here, rather than a plywood-versus-paint or premium-sheet comparison. GatorSkins, Skatelite Pro, and Skate Paint are not available choices for this product.\u003c\/p\u003e\u003ch2\u003eBuild the flag ramp before the session\u003c\/h2\u003e\u003cp\u003ePlan about 30 to 45 minutes with a drill. The package provides a finished kit with pre-cut, pre-drilled transition parts, counted hardware, and photo instructions. Set the pieces out in order on a level surface so the short build stays straightforward and the graphic ramp is ready to skate.\u003c\/p\u003e\u003ch2\u003eMake it the setup's first destination\u003c\/h2\u003e\u003cp\u003eA two-foot quarter pipe can give a newer or returning rider a dependable transition to revisit throughout a session. Place the American Flag ramp where its coping and roll-away stay open. If the setup expands later, add only a feature that creates a different job instead of choking off the route back to the ramp.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne American Flag 3-foot-wide quarter pipe kit\u003c\/li\u003e\n\u003cli\u003ePhoto assembly instructions\u003c\/li\u003e\n\u003cli\u003ePre-counted rust-resistant screws and required galvanized metal parts\u003c\/li\u003e\n\u003cli\u003ePre-cut and pre-drilled boards with computer-cut transition pieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping to the contiguous U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eBoxed kit delivery\u003c\/h3\u003e\u003cp\u003eThe kit arrives packaged for assembly. Keep the components together, inspect the shipment when it arrives, and report any visible damage promptly.\u003c\/p\u003e\u003ch3\u003eAssembly planning\u003c\/h3\u003e\u003cp\u003eAssembly uses a drill and takes about 30 to 45 minutes. Build on a level foundation with the required tools and follow the photo instructions.\u003c\/p\u003e\u003ch3\u003eQuestions about American Flag Quarter Pipe Ramp - 3 Foot Wide\u003c\/h3\u003e\u003ch4\u003eHow does the American Flag Quarter Pipe compare with Greg Lutzka's 3 in 1?\u003c\/h4\u003e\u003cp\u003eThe American Flag ramp is a dedicated two-foot quarter pipe, 3 feet 2 inches wide and 4 feet deep, with its graphic fixed to the product. Greg Lutzka's 3 in 1 is 12 inches tall, 4 feet wide, and 39 inches long, and can work as a quarter pipe, ledge, or launch ramp. Choose dedicated transition height or compact multi-use variety.\u003c\/p\u003e\u003ch4\u003eHow does the 3 Foot Wide American Flag Quarter Pipe Ramp compare with the Jack-O Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eThe American Flag and Jack-O quarter pipes share the same 2-foot height, 3-foot-2-inch width, 4-foot depth, 70-pound weight, 30-to-45-minute build, and no separate Skate Paint choice. Choose the American Flag model when its flag artwork belongs in the setup; choose Jack-O when the Halloween graphic is the identity you want. Their physical plan does not decide between them.\u003c\/p\u003e\u003ch4\u003eCan the American Flag Quarter Pipe be used outdoors?\u003c\/h4\u003e\u003cp\u003eYes. This quarter pipe is made for indoor or outdoor use. Place it on a level foundation, keep the approach and roll-away clear, and retain the fixed American Flag finish rather than assuming a separate paint or premium-sheet package is part of this ramp.\u003c\/p\u003e\u003ch4\u003eWhat can riders practice on the American Flag Quarter Pipe Ramp - 3 Foot Wide?\u003c\/h4\u003e\u003cp\u003eUse the American Flag Quarter Pipe Ramp - 3 Foot Wide for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the American Flag Quarter Pipe Ramp - 3 Foot Wide if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/quarter-pipes\"\u003eCompare Quarter Pipe Ramps\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":40753242374327,"sku":"Q3-FLAG","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/3_12784b64-3170-4a63-9c74-79bff357c446.jpg?v=1656352422"},{"product_id":"triangle-apple-rail","title":"Triangle Apple Skate Rail","description":"  \u003cp\u003e\u003cstrong\u003eMark Appleyard's triangle, wrapped in coping\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Triangle Apple Rail takes the familiar grind target and gives it a completely different silhouette: a six-foot plywood triangle cradled by galvanized coping. Designed with Mark Appleyard, it sits low enough to work into a compact setup while giving riders more shape to explore than another standard flat bar.\u003c\/p\u003e\u003ch2\u003eNot another flat bar\u003c\/h2\u003e\u003cp\u003eThe Triangle Apple Rail uses a plywood triangle cradled by galvanized coping, so the working shape is part rail and part banked obstacle. That gives the setup a different decision than a standard round or flat bar without pretending the product is a full launch ramp.\u003c\/p\u003e\u003ch2\u003eSix feet long with a low, wide profile\u003c\/h2\u003e\u003cp\u003eThe Triangle Apple measures 6 feet long, 24 inches wide, and 12 inches high, weighing 60 pounds. Plan the product footprint plus clear pavement for the approach and roll-away before deciding where it will live and stay during a session.\u003c\/p\u003e\u003ch2\u003eA ramp kit built to go together\u003c\/h2\u003e\u003cp\u003eThe kit includes exterior lumber and plywood, pre-counted rust-resistant screws, photo instructions, galvanized metal parts, and pre-cut, pre-drilled boards. Keep those parts grouped during the build so the finished triangle and coping follow the supplied design without sourcing a separate hardware list.\u003c\/p\u003e\u003ch2\u003eDesigned with Mark Appleyard\u003c\/h2\u003e\u003cp\u003eMark Appleyard designed the Triangle Apple Rail around a six-foot triangular profile wrapped in galvanized coping. The attribution belongs to this exact obstacle, while the 24-inch width, 12-inch height, and 60-pound weight explain how the product will actually fit a planned spot.\u003c\/p\u003e\u003ch2\u003eAdd one quart of Skate Paint when needed\u003c\/h2\u003e\u003cp\u003eChoose the Triangle Apple without Skate Paint or add one quart for the exposed wood. Keep the coating choice separate from the base rail kit in the order, then follow the Skate Paint application and cure guidance before the first session.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne Triangle Apple Rail kit\u003c\/li\u003e\n\u003cli\u003eOne 1-quart container of Skate Paint only when selected\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eA kit built to assemble\u003c\/h3\u003e\u003cp\u003ePre-cut, pre-drilled boards, galvanized metal parts, pre-counted rust-resistant screws, and photo instructions are included. Keep the pieces grouped and follow the supplied build sequence before skating.\u003c\/p\u003e\u003ch3\u003ePlan for a 60-pound obstacle\u003c\/h3\u003e\u003cp\u003eThe finished Triangle Apple weighs 60 pounds. Choose a stable location with room for the 6-foot product, its 24-inch width, the approach, and the roll-away.\u003c\/p\u003e\u003ch3\u003eQuestions about Triangle Apple Skate Rail\u003c\/h3\u003e\u003ch4\u003eHow does the Triangle Apple differ from a flat skate rail?\u003c\/h4\u003e\u003cp\u003eIts plywood triangle sits beneath galvanized coping, creating a wider 24-inch obstacle with rail-and-ramp character. A flat rail keeps the working surface on a narrower bar. Choose Triangle Apple when the triangular body, not just a coping edge, is the desired feature.\u003c\/p\u003e\u003ch4\u003eHow does Triangle Apple compare with the Dave Bachinsky Crescent Ledge?\u003c\/h4\u003e\u003cp\u003eTriangle Apple is a six-foot plywood triangle wrapped in coping, creating a low rail-and-bank form. The Crescent is a ten-foot curved ledge that changes from a 9-inch low end to a 14-inch high end. Choose the compact triangular body or the long changing-height edge based on the movement the rider wants.\u003c\/p\u003e\u003ch4\u003eWhen should I compare Triangle Apple with Bump to Rail?\u003c\/h4\u003e\u003cp\u003eCompare them when the rider wants coping plus a shaped plywood body. Triangle Apple centers a six-foot triangle wrapped in coping, while Bump to Rail fixes a bump to a raised red rail. Choose the movement and route that the complete obstacle should create.\u003c\/p\u003e\u003ch4\u003eWhat tricks can riders practice on the Triangle Apple Skate Rail?\u003c\/h4\u003e\u003cp\u003eUse the Triangle Apple Skate Rail for rail tricks such as boardslides and 50-50 grinds, then progress to more technical slides and grinds as control improves. Keep a straight, clear approach and exit that match the rail's height and length.\u003c\/p\u003e\u003ch4\u003eCan I return the Triangle Apple Skate Rail if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/skate-rails\"\u003eskate rails\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None","offer_id":43139027435759,"sku":"TAR","price":329.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":43139027468527,"sku":"TAR_QSP","price":408.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/products\/TriangleAppleRail2.jpg?v=1659719665"},{"product_id":"garage-mini-ramp-2-tall-halfpipe","title":"Garage Mini Ramp Kit","description":"  \u003cp\u003e\u003cstrong\u003eMake one more run a nightly problem\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGarage Mini Ramp Kit is a compact, real half-pipe experience for the places people actually come home to: a garage, basement, backyard, or dedicated corner. Pick the width around the room and the people who will use it, then make a surface choice that respects its tighter transition.\u003c\/p\u003e\u003ch2\u003eMeasure the ramp and the room around it\u003c\/h2\u003e\u003cp\u003eThe standard eight-foot Garage Mini Ramp Kit is 26 inches tall and 15 feet 8 inches long, with 8-, 12-, and 16-foot widths available. Tape out the whole ramp before buying. The useful home setup leaves enough room to enter, exit, carry boards around it, and keep the rest of the space functioning.\u003c\/p\u003e\u003ch2\u003eMake after-school and after-work sessions easy\u003c\/h2\u003e\u003cp\u003eThis ramp earns its place when it makes a quick session feel possible without a drive or a complicated setup. Choose the width around the riders who will use it most, whether that is a compact personal ramp or a wider shared session. The best choice is the version that will still get skated on an ordinary Tuesday.\u003c\/p\u003e\u003ch2\u003eUpgrade the included two-layer riding stack\u003c\/h2\u003e\u003cp\u003eTwo plywood riding layers are already included, so the base Garage Mini Ramp has its complete wood riding stack. Add Skate Paint whenever plywood remains the exposed skating surface: one gallon at 8 feet and two gallons at 12 or 16 feet. Upgrade to Skatelite Pro for a dedicated professional-grade final skating surface; the required sheet count is four, six, or eight by width, with a smaller paint amount for the wood that remains exposed. GatorSkins is not offered on this tighter transition because it can crack.\u003c\/p\u003e\u003ch2\u003eBuild a compact ramp with an organized plan\u003c\/h2\u003e\u003cp\u003ePlan about four to six hours with a drill for the standard eight-foot kit. Pre-cut, pre-drilled parts, counted hardware, and photo instructions keep the project manageable when the work area is ready. Stage the pieces before starting, protect the chosen surface material, and leave time for a final check before the first session.\u003c\/p\u003e\u003ch2\u003eChoose a width you will keep using\u003c\/h2\u003e\u003cp\u003eWidth changes the room across the transition, material quantities, and the space the ramp requires. Decide that first so the surface and installation plan match the same ramp. Financing is available with Shop Pay Installments; available plans, rates, and approval depend on the order and buyer eligibility. Paid installation is quoted for the actual address, access, timing, and site preparation.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne Garage Mini Ramp kit in the selected 8-, 12-, or 16-foot width\u003c\/li\u003e\n\u003cli\u003eTwo plywood riding-surface layers, with Skatelite Pro added when selected\u003c\/li\u003e\n\u003cli\u003eThe correct Skate Paint amount for the selected width and surface when paint protection is selected\u003c\/li\u003e\n\u003cli\u003eExterior-grade lumber and plywood parts\u003c\/li\u003e\n\u003cli\u003ePre-counted rust-resistant screws and galvanized metal parts\u003c\/li\u003e\n\u003cli\u003ePre-cut and pre-drilled boards with computer-cut transition pieces\u003c\/li\u003e\n\u003cli\u003ePhoto instruction booklet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eFreight delivery: what to expect\u003c\/h3\u003e\u003cp\u003eThe kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.\u003c\/p\u003e\u003ch3\u003eAssembly and installation\u003c\/h3\u003e\u003cp\u003eBring a drill and plan 4 to 6 hours to assemble the standard 8-foot kit. Paid installation is available by quote. Travel, timing, site preparation, and pricing are quoted for each project.\u003c\/p\u003e\u003ch3\u003eQuestions about Garage Mini Ramp Kit\u003c\/h3\u003e\u003ch4\u003eHow does the Garage Mini Ramp Kit compare with the 8 Foot Wide Half Pipe?\u003c\/h4\u003e\u003cp\u003eAt eight feet wide, the Garage Mini Ramp is 26 inches tall and 15 feet 8 inches long. The 8 Foot Wide Half Pipe is 3.5 feet tall, 22 feet 8 inches long, and can add one 5-foot corner. Garage includes two plywood riding layers and does not offer GatorSkins; the taller model starts with one plywood layer and offers both premium sheets. Choose by transition, length, and surface path.\u003c\/p\u003e\u003ch4\u003eHow much Skatelite Pro and Skate Paint comes with each Garage Mini Ramp width?\u003c\/h4\u003e\u003cp\u003eSkatelite Pro uses four sheets at 8 feet wide, six at 12 feet, and eight at 16 feet. With Skatelite selected, paint for exposed plywood is one quart at 8 or 12 feet and one gallon at 16 feet. For the included plywood surface, the paint amounts are one gallon at 8 feet and two gallons at 12 or 16 feet.\u003c\/p\u003e\u003ch4\u003eWhat can riders practice on the Garage Mini Ramp Kit?\u003c\/h4\u003e\u003cp\u003eUse the Garage Mini Ramp Kit for repeated transition runs and progression on skills such as kickturns, rock-to-fakies, axle stalls, and linking tricks from wall to wall. The exact progression should match the rider's ability, the selected transition, and the clear skating area around the ramp.\u003c\/p\u003e\u003ch4\u003eHow much room should I plan around the Garage Mini Ramp Kit?\u003c\/h4\u003e\u003cp\u003eStart with the assembled dimensions for the selected width, height, corner, and surface configuration. Then leave a clear approach, roll-away, deck access, and enough working room for assembly and maintenance. Confirm the actual site before ordering; the listed product footprint alone is not the same as a complete skating-area plan.\u003c\/p\u003e\u003ch4\u003eCan I return the Garage Mini Ramp Kit if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003ch4\u003eCan OC Ramps build a custom version of the Garage Mini Ramp Kit?\u003c\/h4\u003e\u003cp\u003eYes. If the standard width, height, transition, or corner layout does not fit the site or intended riding, start with OC Ramps' Custom Builds page. Share the usable footprint, rider needs, desired transition, access, and location so the project can be evaluated as a custom build instead of forcing a standard kit into the wrong space.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/halfpipe\"\u003eCompare Half Pipes and Mini Ramps\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/custom-skateboard-ramps\"\u003eExplore custom skate ramp builds\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"8 ft \/ No \/ 2 Plywood Layers (Included)","offer_id":44190957666543,"sku":"GarageMini-8ftWide","price":2499.0,"currency_code":"USD","in_stock":true},{"title":"8 ft \/ No \/ Skatelite Pro (Recommended)","offer_id":44190952358127,"sku":"GarageMini-8ftWide+SL","price":3635.0,"currency_code":"USD","in_stock":true},{"title":"8 ft \/ Yes (Correct Amount Included) \/ 2 Plywood Layers (Included)","offer_id":44190957699311,"sku":"GarageMini-8ftWide+Gallon","price":2698.0,"currency_code":"USD","in_stock":true},{"title":"8 ft \/ Yes (Correct Amount Included) \/ Skatelite Pro (Recommended)","offer_id":44190952521967,"sku":"GarageMini-8ftWide+1QSP+SL","price":3714.0,"currency_code":"USD","in_stock":true},{"title":"12 ft \/ No \/ 2 Plywood Layers (Included)","offer_id":44190957732079,"sku":"GarageMini-12ftWide","price":3799.0,"currency_code":"USD","in_stock":true},{"title":"12 ft \/ No \/ Skatelite Pro (Recommended)","offer_id":44190952751343,"sku":"GarageMini-12ftWide+SL","price":5503.0,"currency_code":"USD","in_stock":true},{"title":"12 ft \/ Yes (Correct Amount Included) \/ 2 Plywood Layers (Included)","offer_id":44190957764847,"sku":"GarageMini-12ftWide+2xGSP","price":4197.0,"currency_code":"USD","in_stock":true},{"title":"12 ft \/ Yes (Correct Amount Included) \/ Skatelite Pro (Recommended)","offer_id":44190952915183,"sku":"GarageMini-12ftWide+1QSP+SL","price":5582.0,"currency_code":"USD","in_stock":true},{"title":"16 ft \/ No \/ 2 Plywood Layers (Included)","offer_id":44190957797615,"sku":"GarageMini-16ftWide","price":4799.0,"currency_code":"USD","in_stock":true},{"title":"16 ft \/ No \/ Skatelite Pro (Recommended)","offer_id":44190953144559,"sku":"GarageMini-16ftWide+SL","price":7071.0,"currency_code":"USD","in_stock":true},{"title":"16 ft \/ Yes (Correct Amount Included) \/ 2 Plywood Layers (Included)","offer_id":44190957830383,"sku":"GarageMini-16ftWide+2xGSP","price":5197.0,"currency_code":"USD","in_stock":true},{"title":"16 ft \/ Yes (Correct Amount Included) \/ Skatelite Pro (Recommended)","offer_id":44190953308399,"sku":"GarageMini-16ftWide+GSP+SL","price":7270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/files\/garage-mini__1_22cb7096-225e-4a3f-ae92-8246f4eec2a7.jpg?v=1699023305"},{"product_id":"greg-lutzkas-3-in-1-quarter-pipe","title":"Greg Lutzka 3 in 1 Quarter Pipe","description":"  \u003cp\u003e\u003cstrong\u003eThree obstacle jobs in one compact build\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGreg Lutzka's 3 in 1 Quarter Pipe is a small obstacle that avoids being a one-trick purchase. Its compact geometry can be approached as a quarter pipe, ledge, or launch ramp, making it a smart choice when floor space is limited but the session still needs variety.\u003c\/p\u003e\u003ch2\u003eFit three jobs into a compact footprint\u003c\/h2\u003e\u003cp\u003eAt 12 inches tall, 4 feet wide, and 39 inches long, the Greg Lutzka 3 in 1 Quarter Pipe is built for a compact part of the setup. Its 65-pound weight helps keep the scale practical. Plan enough open ground around each usable face so the obstacle can change jobs without changing location.\u003c\/p\u003e\u003ch2\u003eChoose the approach, change the obstacle\u003c\/h2\u003e\u003cp\u003eThis piece can serve as a quarter pipe, a ledge, or a launch ramp depending on how it is approached. That is the buying decision: one object that can invite different tricks instead of a fixed obstacle with one narrow purpose. Set it where each approach can remain clear and choose the job the session needs that day.\u003c\/p\u003e\u003ch2\u003eMatch the top surface to the use\u003c\/h2\u003e\u003cp\u003eThe 3 in 1 can be selected with plywood or Skatelite for the top skating surface. The optional one-quart Skate Paint choice protects exposed plywood and stays off the Skatelite surface. Choose the riding material first, then add paint only where wood remains exposed.\u003c\/p\u003e\u003ch2\u003eBuild it once, then keep it versatile\u003c\/h2\u003e\u003cp\u003eAssembly calls for a drill and about 45 to 60 minutes. The pre-cut and pre-drilled parts, counted fasteners, and photo instructions keep the build focused without turning the obstacle into a fabrication project. Use a level foundation and check the hardware before trying the piece from its different approaches.\u003c\/p\u003e\u003ch2\u003eLet the next obstacle do something else\u003c\/h2\u003e\u003cp\u003eBecause this one piece already covers transition, ledge, and launch roles, do not crowd it with a duplicate job. If the setup grows, add an obstacle that creates a different type of movement while keeping the 3 in 1's approaches open. That is how a small collection stays fun instead of feeling cramped.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne Greg Lutzka 3-in-1 Quarter Pipe\u003c\/li\u003e\n\u003cli\u003eExterior-grade lumber and plywood parts\u003c\/li\u003e\n\u003cli\u003ePre-counted rust-resistant screws and required galvanized metal parts\u003c\/li\u003e\n\u003cli\u003ePre-cut and pre-drilled boards with computer-cut transition pieces\u003c\/li\u003e\n\u003cli\u003ePhoto instruction booklet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShipping to the contiguous U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eGreg Lutzka 3 in 1 Quarter Pipe freight delivery\u003c\/h3\u003e\u003cp\u003eThe kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.\u003c\/p\u003e\u003ch3\u003eAssembly planning\u003c\/h3\u003e\u003cp\u003eAssembly uses a drill and takes about 45 to 60 minutes. Build on a level foundation with the required tools and follow the photo instructions.\u003c\/p\u003e\u003ch3\u003eQuestions about Greg Lutzka 3 in 1 Quarter Pipe\u003c\/h3\u003e\u003ch4\u003eHow does the Greg Lutzka 3 in 1 differ from the GRL Combo?\u003c\/h4\u003e\u003cp\u003eThe Greg Lutzka model is one 12-inch-tall, four-foot-wide obstacle that serves as a quarter pipe, ledge, or launch ramp according to the approach. The GRL Combo combines a six-foot grind box, skate rail, and launch ramp in one product. Choose the Greg Lutzka model for one compact obstacle with three uses, or the GRL Combo for three distinct skating features within the same setup.\u003c\/p\u003e\u003ch4\u003eHow does the Greg Lutzka 3 in 1 compare with the 4 Foot Wide Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eThe Greg Lutzka 3 in 1 is 12 inches tall, 4 feet wide, 39 inches long, and 65 pounds, with quarter-pipe, ledge, and launch-ramp uses. The 4 Foot Wide Quarter Pipe is 3 feet 2 inches tall, 6 feet 5 inches deep, and 175 pounds. Choose compact versatility or a taller dedicated transition.\u003c\/p\u003e\u003ch4\u003eWhat should I plan if the Greg Lutzka 3 in 1 must move between sessions?\u003c\/h4\u003e\u003cp\u003eAt 65 pounds, the Greg Lutzka 3 in 1 is compact but should not be treated like a lightweight accessory. Choose its skating and storage positions before assembly, keep the movement route clear, and plan appropriate help if it will change locations regularly. The product's small footprint does not mean one person should carry it.\u003c\/p\u003e\u003ch4\u003eWhat can riders practice on the Greg Lutzka 3 in 1 Quarter Pipe?\u003c\/h4\u003e\u003cp\u003eUse the Greg Lutzka 3 in 1 Quarter Pipe for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.\u003c\/p\u003e\u003ch4\u003eCan I return the Greg Lutzka 3 in 1 Quarter Pipe if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/quarter-pipes\"\u003eCompare Quarter Pipe Ramps\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/ramps-101\"\u003ePlan the ramp before the build\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"None \/ Plywood","offer_id":44256056312047,"sku":"GL3in1","price":449.0,"currency_code":"USD","in_stock":true},{"title":"None \/ Skatelite","offer_id":45281815724271,"sku":"GL3in1+Gatorskins","price":599.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Plywood","offer_id":44256056377583,"sku":"GL3in1+Quart","price":528.0,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Skatelite","offer_id":45281815757039,"sku":"GL3in1+QSP+Gatorskins","price":678.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/files\/greglutzkaminiquarterpipe.jpg?v=1700864685"},{"product_id":"skater-starter-pack-1","title":"OC Ramps Starter Package 1","description":"  \u003cp\u003e\u003cstrong\u003eA first setup that can change before every session\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStarter Package 1 combines two Wedge Bump Ramps, a Roll-On Rail, and a Greg Lutzka complete skateboard so a new skater is not locked into one obstacle. Spread the ramps apart, bring them together, or move the rail between them as balance and confidence grow.\u003c\/p\u003e\u003ch2\u003eTwo Wedge Bumps, more than one arrangement\u003c\/h2\u003e\u003cp\u003ePlace the two Wedge Bump Ramps side by side, leave a gap between them, or use them in different parts of the setup. The package gives a beginner two matching launch shapes without forcing every session into one permanent layout or one repeated riding target.\u003c\/p\u003e\u003ch2\u003eRoll onto the rail before learning to ollie onto it\u003c\/h2\u003e\u003cp\u003eThe Roll-On Rail lets a new skater approach the working surface without first ollieing onto a taller bar. That creates a practical place to work on balance and basic grinds while the rest of the package handles launch and transition practice.\u003c\/p\u003e\u003ch2\u003eA Greg Lutzka complete is ready for the setup\u003c\/h2\u003e\u003cp\u003eThe included Greg Lutzka complete uses a 31-by-7.5-inch, 7-ply hard rock maple deck with aluminum trucks, ABEC bearings, and 50 mm wheels. A matching fingerboard and tutorial video provide two additional ways to learn the package beyond the ramps and rail.\u003c\/p\u003e\u003ch2\u003eUse the tutorial and fingerboard between sessions\u003c\/h2\u003e\u003cp\u003eThe matching fingerboard and tutorial access give a beginner a way to study the included setup away from the pavement. They do not replace riding time, but they make the package more than three obstacles and a board by adding a smaller visual learning tool to the order.\u003c\/p\u003e\u003ch2\u003eKeep one bump available as the layout grows\u003c\/h2\u003e\u003cp\u003eBecause Package 1 includes two matching Wedge Bumps, one can remain a familiar takeoff while the other moves to a new gap, rail, or route. That split lets the setup change without removing every known reference point from a beginner's session at once.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo Wedge Bump Ramps\u003c\/li\u003e\n\u003cli\u003eOne Roll-On Rail\u003c\/li\u003e\n\u003cli\u003eOne Greg Lutzka complete skateboard with ABEC bearings, 50 mm wheels, aluminum trucks, and a 31-by-7.5-inch 7-ply hard rock maple deck\u003c\/li\u003e\n\u003cli\u003eOne matching fingerboard and tutorial video access\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eKeep the Package 1 pieces organized\u003c\/h3\u003e\u003cp\u003eStarter Package 1 includes two Wedge Bump Ramps, a Roll-On Rail, and a complete skateboard. Sort ramp, rail, and board parts by their own instructions before setup.\u003c\/p\u003e\u003ch3\u003eBuild the Package 1 setup in stages\u003c\/h3\u003e\u003cp\u003ePlace or assemble the two Wedge Bumps first, then add the Roll-On Rail with clear pavement around each feature. The arrangement can change as the rider learns.\u003c\/p\u003e\u003ch3\u003eQuestions about OC Ramps Starter Package 1\u003c\/h3\u003e\u003ch4\u003eWhich new rider is Starter Package 1 best suited to?\u003c\/h4\u003e\u003cp\u003eIt fits a beginner who needs a complete board plus small obstacles that can be rearranged as confidence grows. The two Wedge Bumps and Roll-On Rail support different early practice jobs without requiring a large permanent ramp or an advanced fixed layout.\u003c\/p\u003e\u003ch4\u003eHow should an adult decide whether Package 1 or Package 2 is the better start?\u003c\/h4\u003e\u003cp\u003eChoose Package 1 for two matching Wedge Bumps and a simple Roll-On Rail arrangement. Choose Package 2 when Micro Spine and Launch WR add more transition and wallie variety. Both include a Greg Lutzka complete, so obstacle mix should lead the comparison.\u003c\/p\u003e\u003ch4\u003eDoes the package remove the need for protective gear?\u003c\/h4\u003e\u003cp\u003eNo. Use a properly fitted helmet, knee pads, and elbow pads, and set every obstacle with a clear route suited to the rider's current ability. The package supplies ramps, a rail, a board, and learning extras; protective gear remains a separate responsibility.\u003c\/p\u003e\u003ch4\u003eHow can riders use the OC Ramps Starter Package 1?\u003c\/h4\u003e\u003cp\u003eUse the included obstacles to build more than one practice line instead of repeating a single feature. Start with controlled approaches and basic tricks on each obstacle, then connect compatible launches, grinds, slides, or manuals as the rider's confidence grows.\u003c\/p\u003e\u003ch4\u003eCan I return the OC Ramps Starter Package 1 if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/skate-ramps\"\u003eBrowse skate ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":46069160902895,"sku":"Start#1-2xWedge+RollOnRail+GLskateDeck","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/files\/Package_A_V3_copy.jpg?v=1775238271"},{"product_id":"starter-package-2-limited-run-copy","title":"OC Ramps Starter Package 2","description":"  \u003cp\u003e\u003cstrong\u003eFour pieces, four ways to keep a beginner progressing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStarter Package 2 combines a Micro Spine, Roll-On Rail, Launch WR, and Greg Lutzka complete skateboard. Instead of repeating the same obstacle, the package moves a beginner between two-sided transition, balance and grind practice, a launch-or-wallie feature, and a complete board built for the session.\u003c\/p\u003e\u003ch2\u003eStart with two-sided transition on the Micro Spine\u003c\/h2\u003e\u003cp\u003eThe Micro Spine puts back-to-back transition faces into the package, so a beginner can approach from either direction and learn how speed carries over the center. Keep both sides clear instead of pushing the feature against a wall, preserving a usable return path.\u003c\/p\u003e\u003ch2\u003eRoll onto the rail and build balance first\u003c\/h2\u003e\u003cp\u003eThe Roll-On Rail gives a new skater a lower-friction entry into balance and basic grind practice because the rider can roll onto it instead of needing to ollie onto the working surface on day one. That makes it a distinct tool from the Micro Spine and Launch WR.\u003c\/p\u003e\u003ch2\u003eChoose the launch side or the wallie side\u003c\/h2\u003e\u003cp\u003eLaunch WR brings two distinct faces into one obstacle. Use the launch side as a takeoff and the wallie side as a different wall-style target, giving the same package another job without adding a fifth large piece or repeating the Micro Spine's transition role.\u003c\/p\u003e\u003ch2\u003eA Greg Lutzka complete comes with the setup\u003c\/h2\u003e\u003cp\u003eThe included skateboard uses a 31-by-7.5-inch, 7-ply hard rock maple deck with aluminum trucks, ABEC bearings, and 50 mm wheels. Tutorial video access and a matching fingerboard are included with the complete, giving the beginner a board and learning tools in the same order.\u003c\/p\u003e\u003ch2\u003eUse the fingerboard and tutorial to preview the setup\u003c\/h2\u003e\u003cp\u003eThe matching fingerboard and tutorial access give a beginner a way to see obstacle ideas before the next full session. They complement the complete skateboard and three large features without pretending screen time replaces practice, adding a fifth package benefit beyond the obstacle mix itself.\u003c\/p\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne Micro Spine\u003c\/li\u003e\n\u003cli\u003eOne Roll-On Rail\u003c\/li\u003e\n\u003cli\u003eOne Launch WR with launch and wallie sides\u003c\/li\u003e\n\u003cli\u003eOne Greg Lutzka complete skateboard with ABEC bearings, 50 mm wheels, aluminum trucks, a 31-by-7.5-inch 7-ply hard rock maple deck, matching fingerboard, and tutorial video access\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFree shipping in the U.S.\u003c\/h3\u003e\u003cp\u003eShipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.\u003c\/p\u003e\u003ch3\u003eSeparate the Package 2 features\u003c\/h3\u003e\u003cp\u003eStarter Package 2 combines a Micro Spine, Roll-On Rail, Launch WR, and a complete skateboard. Keep the instructions and parts for each obstacle together.\u003c\/p\u003e\u003ch3\u003eGive Package 2's two-sided features room\u003c\/h3\u003e\u003cp\u003eSet the Micro Spine and Launch WR with usable approaches on both sides, then position the rail as its own balance-and-grind feature.\u003c\/p\u003e\u003ch3\u003eQuestions about OC Ramps Starter Package 2\u003c\/h3\u003e\u003ch4\u003eWhich beginner is Starter Package 2 best suited to?\u003c\/h4\u003e\u003cp\u003eIt fits a new rider who wants several distinct practice shapes immediately: two-sided transition on Micro Spine, balance and grinds on Roll-On Rail, and launch or wallie work on Launch WR, plus a complete skateboard for the session.\u003c\/p\u003e\u003ch4\u003eHow should an adult compare Starter Package 2 with Package 1?\u003c\/h4\u003e\u003cp\u003eChoose Package 2 for more varied obstacle shapes, including Micro Spine and Launch WR. Choose Package 1 for two matching Wedge Bumps and a simpler rearrangeable layout. Both include a Greg Lutzka complete, so compare the ramp-and-rail mix first.\u003c\/p\u003e\u003ch4\u003eDoes Starter Package 2 include protective gear?\u003c\/h4\u003e\u003cp\u003eNo. Use a properly fitted helmet, knee pads, and elbow pads, and keep every route appropriate for the rider's current ability. The package includes obstacles, a complete skateboard, a matching fingerboard, and tutorial access; protective gear is separate.\u003c\/p\u003e\u003ch4\u003eHow can riders use the OC Ramps Starter Package 2?\u003c\/h4\u003e\u003cp\u003eUse the included obstacles to build more than one practice line instead of repeating a single feature. Start with controlled approaches and basic tricks on each obstacle, then connect compatible launches, grinds, slides, or manuals as the rider's confidence grows.\u003c\/p\u003e\u003ch4\u003eCan I return the OC Ramps Starter Package 2 if it is not the right fit?\u003c\/h4\u003e\u003cp\u003eEligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/skate-ramps\"\u003eBrowse skate ramps and obstacles\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/return-policy\"\u003eReview the OC Ramps Return Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"OC RAMPS","offers":[{"title":"Default Title","offer_id":46069171060975,"sku":"Start#2-MicroSpine+RollOnRail+LaunchWR+GLskateDeck","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/5637\/4711\/files\/Package_Bvv2_copy.jpg?v=1775238233"}],"url":"https:\/\/ocramps.com\/collections\/compact-backyard-setups.oembed","provider":"OC Ramps","version":"1.0","type":"link"}