Your ramp delivery brings another feature to skate
Add the Manny Pad to an eligible large quarter-pipe or half-pipe order and the shipping pallet becomes part of your setup. The six-inch-high pad gives you a place for manuals, with galvanized coping along both eight-foot sides for grinds. It arrives built, ready to find its place in the line once the ramp shipment is unpacked.
Turn the pallet into a session
Your eligible ramp order ships on the Manny Pad itself. After unloading, you have another obstacle to work into the spot alongside the ramp you ordered. Choose the add-on when you want manual and grind practice to be part of the same home setup.
Work either eight-foot edge
Both long sides have galvanized coping for grinds. Position the pad so you can reach the edge you want to skate and leave room to roll away. Having a grind edge on each side gives you another approach to work on within the same obstacle.
Make manuals the focus
The pad stands six inches high, with an eight-foot length to work along. Use it as a target for a manual or nose manual, or add that balance section to a longer line. Compare the height with the obstacles you already skate when deciding how to approach it.
Give the pad room beyond its footprint
At eight feet long and four feet wide, the pad takes a defined place in the setup. Add the approach and exit to that rectangle, including access to the coping you plan to use. Our Space and Fit guide helps you plan the riding area around it.
Plan the move from delivery to skate spot
The Manny Pad comes already built and weighs 85 pounds. Plan how you will move it from the unloading area into position after unpacking the ramp shipment. There is no pad assembly project to add to the build, but its size and weight still deserve a practical handling plan.
What's in the Box
- One assembled Manny Pad with galvanized coping along both 8-foot sides
Available with a qualifying ramp order
The Manny Pad is available only with a qualifying large quarter-pipe or half-pipe order. The ramp ships on the assembled pad as its pallet, so this product is not offered as a standalone parcel purchase.
Delivered with the large-ramp shipment
The assembled Manny Pad ships on the qualifying large ramp's freight pallet. OC Ramps will confirm delivery timing and the receiving requirements for the exact order. Inspect the shipment when it arrives and report visible damage promptly.
Arrives assembled and ready to place
No Manny Pad assembly is required. Before delivery, reserve level pavement for the eight-foot obstacle and leave usable approach and roll-away space beyond both ends.
Questions about Skateboard Manny Pad
How does the Skateboard Manny Pad compare with the Double Step Ledge?
The Manny Pad is a low eight-foot platform with coping on both sides and a qualifying-ramp purchase requirement. Double Step is a six-foot kit with two connected ledge heights. Choose the Manny Pad when the large-ramp project can use a long low platform; choose Double Step for standalone height variety.
How does the Manny Pad differ from a standard Grind Box?
The Manny Pad is a low, long platform tied to a qualifying large-ramp order and doubles as that ramp's freight pallet. A Grind Box is a standalone ledge product offered in multiple lengths. Choose based on purchase path and obstacle role, not appearance alone.
Who should add the Manny Pad to a qualifying ramp order?
It fits a buyer who wants the freight pallet to become a low, assembled manual-and-ledge obstacle after the larger ramp arrives. The decision is not just about saving packaging; it is whether an eight-foot, six-inch-high pad adds a useful second feature to the site.
What tricks can I practice on the Skateboard Manny Pad?
The flat top is designed for manual practice, including manuals and nose manuals, plus ollies on and off the pad. Riders can also use its edges for suitable slides and grinds as their skill level progresses.
Can I return the Skateboard Manny Pad if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
