1,300+ Customer Reviews
5.0 average rating
100,000+ Kits Sold
Across the OC Ramps lineup
Making Ramps Since 1997
Experience behind every setup
Free Shipping
48 contiguous U.S. states. No minimum.
Ramp Surfaces
Choose the riding surface before you finish the ramp
The top sheet is the part of the ramp your wheels meet every run. OC Ramps offers GatorSkins and Skatelite panels for building or refreshing that riding surface. Whether you are upgrading a kit or planning a DIY ramp, compare the actual panel dimensions, finish and preparation options before deciding what to order.
A riding sheet is one part of the construction, not a complete ramp. Keep the supporting structure, panel layout and installation requirements in the same plan. Replacing the top layer does not correct damaged material underneath it.
Compare GatorSkins and Skatelite by the panels you will receive
GatorSkins panels measure 48 by 94 inches and are available in Brown or Green. Those are separate color choices, not a promise that you can reverse one panel to change colors. The 94-inch length is two inches shorter than a full eight-foot sheet, which matters when you lay out cuts and seams.
The Skatelite panel measures four by eight feet and is one-quarter inch thick, with a natural wood-tan finish. Do not treat the two products' nominal size labels as identical cutting plans. Compare the current product specifications and the finished appearance you want, then work out the pieces your ramp needs.
Choose panel preparation that matches your build
Both product pages offer an optional pre-drill, countersink and cut service for OC Ramps kits. If you are ordering for an eligible kit, that option handles those preparation steps before installation. Make sure the kit and configuration are clear when arranging preparation.
For a DIY design, choose the option without that kit-specific service and plan the sheet layout to your own build. A simple area calculation can help estimate material, but it does not account for every cut, seam or offcut. Use the actual surface measurements and installation instructions to finalize the order rather than rounding the ramp footprint into a sheet count.
Keep surface upgrades and wood protection separate
GatorSkins and Skatelite are riding panels; Skate Paint is a coating for compatible exposed wood. Do not paint over the GatorSkins or Skatelite top sheets. A ramp with a separate riding surface can still have wooden parts and fasteners that need inspection and care.
Use the OC Ramps buyer guides to compare your build options and the Ramp Care guide to plan ongoing upkeep. If you are choosing an entire ramp, start with the surface options offered on that ramp's product page so you can consider the kit and upgrade together.
Frequently Asked Questions
Should I choose GatorSkins or Skatelite for my ramp?
Start with the exact panels, your ramp's construction and the finish you want. GatorSkins offers Brown or Green panels measuring 48 by 94 inches; the Skatelite product here is a four-by-eight-foot, quarter-inch panel in natural wood tan. Compare the product instructions and preparation options rather than assuming one material is universally best for every ramp.
Are GatorSkins panels a full four by eight feet?
Use 48 by 94 inches for the GatorSkins panels sold here. A full eight feet is 96 inches, so the panel is two inches shorter. That difference can affect cuts, seams and quantity. Plan from the supplied dimensions, not just the four-by-eight wording in a product name.
Are Brown and Green two sides of one GatorSkins panel?
Choose Brown or Green as a separate product option. Do not order on the assumption that flipping the panel gives you the other color. Select the color and preparation option that match the project you intend to build.
Can OC Ramps pre-drill and cut the sheets for me?
The GatorSkins and Skatelite product pages offer pre-drilling, countersinking and cutting for OC Ramps kits only. Choose that service for the eligible kit you are ordering for. It is not a general cut-to-any-DIY-plan service; DIY builders can order without the preparation option.
How many surface panels should I order?
Map the actual riding surfaces and the cuts needed for each piece. Account for transitions, decks, seams and offcuts using the selected panel's dimensions. Dividing total area by sheet area gives only a starting estimate, not a complete cutting plan. Confirm the layout before ordering, especially when switching between 94-inch and 96-inch sheet lengths.
Can I use Skate Paint instead of buying a riding sheet?
They are different choices, not interchangeable versions of one product. Skate Paint coats compatible wood; a GatorSkins or Skatelite panel supplies a separate top sheet. Choose the ramp construction and riding surface first, then identify which exposed wooden parts need coating. Do not apply Skate Paint over these riding panels.
Does a new top sheet eliminate ramp maintenance?
No. Keep checking the complete ramp, including the supporting wood, edges, fasteners and surrounding site. A surface upgrade does not repair damage below it or remove the need for care. The Ramp Care guide helps you plan those checks.
Should I order loose sheets or select a surface upgrade with a ramp kit?
If you are buying a new kit, review the surface choices on that product first so the ramp and upgrade are considered together. Loose panels are a separate buying route for a planned build or resurfacing job. Do not assume a loose-sheet order includes a ramp kit, supporting lumber or every item needed for installation.
Stay in the Loop
Get setup ideas, skate tips, exclusive deals, and first access to new products. Join 10,000+ skate families.
No spam, ever. Unsubscribe anytime.