1,300+ Customer Reviews
5.0 average rating
100,000+ Kits Sold
Across the OC Ramps lineup
Making Ramps Since 1997
Experience behind every setup
Free Shipping
48 contiguous U.S. states. No minimum.
Skate Paint
Protect the wood you want to keep skating
Whether you are finishing a new plywood ramp or caring for one you already skate, the coating belongs in the plan. OC Ramps Skate Paint is a clear coating designed for wooden skateboard ramps. Choose the quantity for the surfaces you will coat and the work you can complete together, rather than buying by the ramp's footprint alone.
Skate Paint is not a replacement riding sheet or a repair for damaged plywood. Start with sound, properly prepared wood, then follow the application directions. Our Ramp Care guide brings coating, inspection and ongoing upkeep together so you can plan beyond the first coat.
Choose a quart, a gallon or a five-gallon project
The one-quart size covers approximately 50 square feet, while one gallon covers approximately 150 to 200 square feet. Measure all the wooden areas you intend to coat, including exposed sides and decks where applicable. A full four-by-eight-foot sheet is 32 square feet on one face, not counting its edges or reverse side.
The five-gallon bucket suits a larger coordinated job. It is not automatically the best choice for several small projects spread over time: opened Skate Paint must be used within 24 hours. Separate smaller containers can make more sense when different parts of the project will be ready on different days. Coverage figures are approximate, so use the product directions to finalize your quantity.
Know when you need paint and when you need a riding surface
Skate Paint coats compatible wood such as plywood and framing lumber. GatorSkins and Skatelite Pro are separate riding-surface products, not finishes you create by painting plywood. Do not apply Skate Paint over those top sheets, Masonite or tempered hardboard.
If you are deciding what to skate on, compare the ramp surface options before choosing your coating. A ramp with a separate top sheet can still have exposed wooden parts that need care. Treat the top surface and the rest of the structure as different parts of the plan rather than assuming one upgrade eliminates all maintenance.
Prepare the job before you open the can
Get the surfaces and tools ready before opening Skate Paint. Follow its directions for preparation, application and drying, and keep the ramp out of use while the coating dries. Plan the work around the next session instead of opening the can and hoping to skate immediately afterward.
Want a colored finish? Skate Paint itself is clear. Let it cure before applying flat latex paint over it; do not mix color or thinner into Skate Paint. For a new ramp project, use our buyer guides to weigh the complete setup, including materials, surfaces and upkeep, before ordering.
Frequently Asked Questions
How much Skate Paint do I need?
Measure the actual wooden faces you plan to coat rather than the ground under the ramp. One quart covers approximately 50 square feet; one gallon covers approximately 150 to 200 square feet. Add the relevant riding faces, decks and sides, then compare the total with the selected product's coverage and application directions. Do not count just the width and length of the assembled footprint.
Should I buy one large container or several smaller ones?
Consider when the work will happen as well as the total area. Opened Skate Paint must be used within 24 hours. A bulk container makes sense for a prepared job you can coat together; smaller unopened containers offer more flexibility for work planned on separate days. Compare quart, gallon and five-gallon sizes.
Is Skate Paint the same as GatorSkins or Skatelite Pro?
No. Skate Paint is a coating for compatible wood. GatorSkins and Skatelite Pro are separate riding sheets. Paint does not turn plywood into either material, and it should not be applied over those sheets. Compare ramp surfaces when choosing a top layer; choose paint for the compatible exposed wood in your project.
Does Skate Paint come in colors?
Skate Paint is clear. For color, allow it to cure before applying flat latex paint over it. Do not add colorants or thinner to the Skate Paint itself. This lets you plan protection first and the colored finish as a separate step.
Can I use Skate Paint on Masonite or tempered hardboard?
No. Skate Paint is intended for compatible real wood, including plywood and framing lumber, not Masonite or tempered hardboard. Identify the material before coating it. A dark or smooth riding face is not enough to tell you what it is made from.
Will paint fix worn or damaged ramp plywood?
A coating is not a structural repair. Inspect the wood first and address damage before recoating. If you are unsure whether the existing material is still suitable, get advice before covering it. The Ramp Care guide helps you distinguish routine upkeep from a problem that needs attention.
Can I save leftover Skate Paint for another weekend?
No. Opened Skate Paint must be used within 24 hours. Prepare the job first and select a container size you can use during that window instead of counting on storing leftovers for a later project.
Does a painted outdoor ramp still need care?
Yes. Coating is one part of looking after a wooden ramp, not a reason to stop checking it. Keep the ramp clean, inspect the riding surface and structure, and follow the product's outdoor-care instructions. Use the care guide to plan the upkeep alongside your skating.
Stay in the Loop
Get setup ideas, skate tips, exclusive deals, and first access to new products. Join 10,000+ skate families.
No spam, ever. Unsubscribe anytime.