The right amount for a smaller ramp or obstacle
One Quart Ramp Skate Paint gives a focused wood-ramp project a coating made for skating, not a generic deck sealant. It covers about 50 square feet, which makes it the practical size for a smaller ramp, obstacle, or touch-up area that does not need a full gallon opened at once.
Cover a focused 50-square-foot project
One Quart Ramp Skate Paint covers about 50 square feet of exposed wooden ramp surface. That amount fits a small obstacle, repair area, or compact ramp that does not justify opening a gallon. Measure the real wood faces and edges, not the ground footprint beneath the ramp.
Measure the wood that will be coated
A 4-by-8-foot plywood sheet is 32 square feet, but cuts, transitions, and exposed sides change the amount that needs coating. Count the actual surface before choosing the quart. The 50-square-foot figure is a coverage guide, not permission to ignore the wood left uncovered.
Keep a small job on schedule
Stage the roller, clean wood, and dry-weather work window before opening One Quart Ramp Skate Paint. Use opened paint within 24 hours. A small container works best when the focused job can be completed in that window rather than left unfinished.
Roll one solid coat
Apply One Quart Ramp Skate Paint as one thick, even coat with a regular nap roller; a sponge roller is preferred. The product is not meant to be sprayed or mixed with thinner. Work evenly across the small project so the coating remains consistent from edge to edge.
Return to skating after the cure
Allow a full 24 hours before skating the coated surface, then keep the outdoor ramp covered with a tarp as part of normal care. The quart solves a focused coating job; it does not remove the need to protect the finished wood from weather between sessions.
What's in the Box
- One 1-quart container of Ramp Skate Paint
Free shipping in the U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Paint order timing
Skate Paint leaves the warehouse within one to three days and typically arrives three to six days after shipment. Use the carrier update when setting paint day, especially when the work depends on a dry-weather window.
Made for real wood
Apply Skate Paint to real wood such as plywood or lumber. Do not use it on Masonite or tempered hardboard, and do not mix in colorants, thinner, or other additives.
Application and care
Roll on one thick, even coat, allow 24 hours to dry, and keep using a tarp as part of the ongoing ramp-care plan. Open the container only when the full job is ready.
Questions about 1 Quart Ramp Skate Paint
Can I recoat a small ramp with 1 Quart Ramp Skate Paint without sanding off the entire old layer?
Yes. Clean the ramp thoroughly and remove debris, but a complete sand-down of the original Skate Paint coat is not required for reapplication. Make sure the measured repair area still fits the quart's coverage before opening the container for the focused recoating job.
Should I apply primer or another sealer before using a quart of Skate Paint?
No. Skate Paint already includes an epoxy component that serves the primer role, so a separate primer or sealer is not part of the application. Start with properly prepared real wood instead of building a stack of unrelated coatings beneath the quart.
Can one quart of Skate Paint go over an existing painted surface?
Yes, Skate Paint can adhere over an existing painted surface, although direct application to bare wood is preferred. Clean and assess the small project first, because the new coating will stick to what is already there and cannot repair a weak underlying layer.
How should I use 1 Quart Ramp Skate Paint?
Use 1 Quart Ramp Skate Paint on properly prepared exposed plywood in a compatible ramp project. Match the amount to the project, follow the current application directions, and do not apply it over GatorSkins or Skatelite Pro top sheets.
Can I return the 1 Quart Ramp Skate Paint if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
What is Skatepaint?
A polyurethane epoxy component paint designed specifically for wooden skate ramps. Skatepaint protects the skate ramp from the water, snow and skateboard abuse.
How is it different from cheap sealants/polyurethanes at my local hardware store?
Cheap sealants are made for outdoor wood patios — not skateboard ramps. They create a “slip-n’-slide” effect. Meaning, the urethane skateboard wheels do not stick to the wood- its too slick a surface. You will ruin your ramp by applying such a sealant. We receive call after call of ramp builders that try and go the cheap route and by an inexpensive sealant to coat the ramp…bad idea. These ramp builders end up calling us thereafter knowing that Skatepaint will cure the problem. Don’t waste your time with cheap paints—go the smart route; buy and paint your ramp once with Skatepaint
What can I apply it to?
ANY type of wood, ie Plywood, 2×4’s. Do NOT use on Masonite/Tempered Hardboard–its a cheap cardboard and not a real wood
How many coats do I need to apply?
One solid, thick, even coat is enough.
How long does it take to dry?
A full 24 hours.
Do I roll it on or spray it?
Use a regular nap roller. Sponge is best recommended. It does not need to be an expensive type of roller- just something basic.
How long will Skatepaint last?
Skatepaint can last up to 3 years. However, it all depends on your personal circumstances. For example, where you live, how much rain/moisture you get, how often skaters ride the ramp, if you cover it with a plastic tarp, how well you take care of it, etc.
How do I reapply it?
There is no need to completely sand down the original coat. Make sure the ramp is free and clean from debris. Then apply the Skatepaint.
Do I still need a plastic tarp to cover my ramp?
Yes. It is highly recommended. The better you take care of your ramp, the longer it will last! Simple as that! In reality, even a ramp with expensive Skatelite needs to be protected with a tarp.
What colors do you have?
Skatepaint is only available in clear. If you’d like, you can apply a colored (flat) latex paint over the Skatepaint after its cured. This you can buy from any hardware store.
Can I add my own color mix-in or thinner?
No. Do not add anything to the chemicals of Skatepaint. It is not designed for additives of any kind.
Can I Skatepaint over an existing painted surface?
Yes. But please note; Skatepaint sticks to whatever you apply it to therefore its best recommend to apply the Skatepaint directly to the bare wood.
Should I seal or primer it before I apply Skatepaint?
No! Skatepaint has an epoxy in it, acting as a primer. It’s a two in one.
What happens if I ruined my ramp with Thompon’s water sealant already?Replace the wood, then use Skatepaint. No cutting corners next time! There is a reason cheap sealants do not work on wooden ramps–they weren’t designed to do so. Skatepaint is the only protectant paint that will prolong the life of your skateboard ramp.
What is the shelf life? Can I save the extra paint I don’t use?
Once you open the can or bucket, you have 24 hours to paint your skate ramp—there is no saving any paint. The shelf life to an un-opened can is 6-9 months.
Will this work on Masonite? Will it still be slippery?
Skatepaint works on ALL types of wood- Masonite is not a real wood, so no. We also do not recommend using Masonite for any outdoor ramp. Use an exterior smooth sanded plywood instead. Masonite is a glorified cardboard–most of the composite materials are not wooden.
I see spots that didn’t absorb the Skatepaint on my ramp, what happened
The Skatepaint application needs to be done evenly. Skatepaint should be applied and rolled over the same spot more than once. After you paint a section, return and roll over it again and again. There should be a glossy look to the ramp after its cured.
What is the delivery time for Skatepaint?
Once you place the order, we’ll ship it out within 1-3 days. After it leaves our warehouse, you should receive it within 3-6 days.
How much do I need to paint my ramp?
Determine the square footage of your ramp. One quart covers 50 sq ft. One gallon covers 150-200 sq ft. One bucket covers 1000 sq ft. A regular 4×8 plywood sheet is 32 sq ft. Count your plywood sheets to better determine your square footage. Most mini ramp halfpipes can use 1-2 gallons. Quarter pipes often use a quart. The bucket of Skatepaint is often used for larger skate ramps or for multiple ramps.
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
