OC Ramps Fingerboard Half Pipe — rear view — backyard half pipe ramp kit

Fingerboard Half Pipe

$199.00
Skip to product information
OC Ramps Fingerboard Half Pipe — rear view — backyard half pipe ramp kit

Fingerboard Half Pipe

5.0
Rated 5.0 out of 5 stars
4 Reviews
$199.00

Bring the half-pipe session to your fingerboard

Set the Fingerboard Half Pipe down, grab your board and work both transitions. The assembled wooden ramp has galvanized-metal coping for tricks at the edges, with a three-pound weight that lets the session move to the next spot. Skate it on your own or take turns with friends.

OC Ramps Fingerboard Half Pipe — top-down view — backyard half pipe ramp kit

Build a back-and-forth session

The half-pipe form gives you opposing transitions in one fingerboard obstacle. Return from one side to the other as you link turns and transition tricks, or focus on a move at one wall. The connected form keeps both sides together when you reset the spot.

Take the trick to the metal coping

Galvanized metal forms the coping on the exterior-grade lumber ramp. Use those edges as targets for fingerboard stalls or grinds as you work from the transition. The wood-and-metal construction brings familiar ramp materials into the miniature setup.

OC Ramps Fingerboard Half Pipe — backyard half pipe ramp kit
OC Ramps Fingerboard Half Pipe — close-up detail — backyard half pipe ramp kit

Make room for twenty-one inches of ramp

The ramp measures twenty-one inches long, ten inches wide and six inches high. Check that footprint against the surface you want to use, with access for your hand at both transitions. Explore the fingerboard ramps collection when choosing another feature for the setup.

Take the session to the next spot

The Half Pipe weighs three pounds and is made to travel between fingerboard spots. Bring it to a friend's setup or move it when the table needs to serve another purpose. Both transitions stay in one piece as the location changes.

OC Ramps Fingerboard Half Pipe — rear view — backyard half pipe ramp kit
OC Ramps Fingerboard Half Pipe — top-down view — backyard half pipe ramp kit

Start with a finished ramp

The Fingerboard Half Pipe arrives preassembled. Bring your own fingerboard and choose the spot for the session; there is no ramp kit to build first. Take turns with friends or spend the session working on your own next trick.

What's in the Box

One preassembled OC Ramps Fingerboard Half Pipe

Specs

Product details

Form Two transitions joined by a flat section
Material Exterior-grade lumber with galvanized-metal coping
Assembly Preassembled
Length 21 inches
Width 10 inches
Height 6 inches
Weight 3 lb

Shipping

Free shipping in the U.S.

Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.

Pay Over Time

See provider terms for full details.

5.0
Rated 5.0 out of 5 stars
Based on 4 reviews
100%would recommend this product
Slide 1 selected
4 reviews
  • K&
    Kristian & Tigran S.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    4 years ago
    5 Stars

    We have the 3.5 mini for the garage and love it also have the finger board half pipe which is very cool!!! 4 foot box & the green ride on rail. Love the products great quality

  • J
    Jonah
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    2 years ago
    5 Stars

    This is an amazing ramp

  • AM
    Abel m.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    4 years ago
    5 Stars

    Beautiful craftsmanship as I admired the ramp as I wrapped it for my grandson for Christmas . Top shelf quality and I cant wait to see his expression on his face when he fingerboards his 1st move. Unfortunately its not Christmas yet so the only picture I can send is one he put his boards around a signature.

  • JJ
    JARED J. H.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    5 years ago
    5 Stars

    great craftsmanship, will be adding more to my park

Frequently Asked Questions

Questions about Fingerboard Half Pipe
What are the dimensions and weight of Fingerboard Half Pipe?

It measures twenty-one inches long, ten inches wide and six inches high, and weighs three pounds. Allow access to both transitions when choosing its place in the setup.

When should I consider one Fingerboard Quarter Pipe instead?

Choose a single Quarter Pipe when you want one transition you can place independently. The Half Pipe brings opposing transitions together in one obstacle for a back-and-forth session.

What could I add alongside a Fingerboard Half Pipe?

A fingerboard launch, ledge or manual pad can add another kind of trick to the setup. Choose the next feature around the line you want to skate and the room available.

What fingerboard tricks work with the Fingerboard Half Pipe?

Link turns between the transitions, or work on stalls and grinds at the metal coping. Leave access for your hand at both ends so you can follow the board through the trick.