A unicorn ramp with room for the session
Bring color to the setup without giving up room to skate. The Unicorn Skate Ramp combines an engraved, pre-painted side design with six feet of quarter-pipe width. Its two-foot-six-inch height gives you a transition to return to for kickturns and the next move you want to work on.
Bring home the engraved unicorn
The unicorn image is engraved into the plywood side, and the ramp arrives pre-painted in the colors shown. You can choose the illustrated design without adding a separate painting project to create that look. The skating setup gets its own character from the start.
Give your approach six feet of width
Six feet across the ramp gives you room to choose your position on the transition. Its two-foot-six-inch height defines the scale of the quarter pipe without adding height just to get more width. Consider both measurements when choosing the ramp you want to skate.
Map the depth before choosing the spot
The Unicorn extends six feet five inches from front to back. Measure that depth together with the approach and return area, especially if the space also holds other obstacles. Our Space and Fit guide helps you check the complete layout before the kit arrives.
Build the quarter pipe with photo guidance
The Unicorn arrives in kit form with an instruction manual and photos. Allow an estimated one to two hours for assembly, with the parts laid out where you can follow the build sequence. That gives you a manageable project to plan before setting aside time for the first session.
Set it where you want to skate
At 185 pounds, the Unicorn needs a considered place in the setup. Work out the route into position and where it will stay between sessions before assembling it. The plywood side design is part of a wooden ramp, so keep maintenance in the plan with our Ramp Care guide.
What's in the Box
- One 6-foot-wide Unicorn Quarter Pipe Ramp in the selected Skate Paint configuration
- Exterior-grade lumber and plywood parts
- Pre-counted rust-resistant screws and required galvanized metal parts
- Pre-cut and pre-drilled boards with computer-cut transition pieces
- Photo instruction booklet
Shipping to the contiguous U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Unicorn Quarter Pipe Ramp freight delivery
This product ships by freight. OC Ramps will confirm delivery timing and the receiving requirements for the exact order. Inspect the shipment when it arrives and report visible damage promptly.
Assembly planning
Assembly uses a drill and wrench and takes about 1 to 2 hours. Build on a level foundation with the required tools and follow the photo instructions.
Questions about Unicorn Quarter Pipe Ramp
How does the Unicorn Quarter Pipe Ramp compare with the Blue Tile Quarter Pipe?
Both are signature graphic ramps, but their geometry is different. The Unicorn is 2 feet 6 inches tall, 6 feet wide, 6 feet 5 inches deep, weighs 185 pounds, and uses rear wheels. The Blue Tile is 2 feet tall, 4 feet wide, 4 feet deep, weighs 68 pounds, and carries Brad McClain artwork. Choose the transition and footprint first, then the visual identity.
How does the Unicorn Quarter Pipe Ramp differ from the American Flag Quarter Pipe?
The Unicorn is a 2-foot-6-inch-tall, six-foot-wide transition with rear wheels, an engraved graphic, shown colors, and an optional one-quart Skate Paint choice. The American Flag model is a compact two-foot-tall, 3-foot-2-inch-wide, 70-pound ramp with a fixed graphic and no separate paint choice. Choose between the larger movable Unicorn layout and the smaller fixed-design transition the site can use comfortably.
How does the Unicorn Quarter Pipe Ramp compare with the standard 4 Foot Wide Quarter Pipe?
The Unicorn stands 2 feet 6 inches tall, spans six feet, weighs 185 pounds, and makes its engraved identity part of the product. The standard four-foot ramp is 3 feet 2 inches tall, weighs 175 pounds, uses rear casters, and offers a plain configurable presentation. Both are 6 feet 5 inches deep. Choose by transition height and usable width before deciding whether the Unicorn design belongs in the setup.
What can riders practice on the Unicorn Quarter Pipe Ramp?
Use the Unicorn Quarter Pipe Ramp for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.
Can I return the Unicorn Quarter Pipe Ramp if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Specifications
Weight: 185 lbs
Height: 2 feet, 6 inches
Width: 6 feet
Length/Depth: 6 feet, 5 inches
Tools Needed: Drill and Wrench
Assembly Time: 1-2 hours
Shipping Cost: FREE!
Shipping Info
This unique, custom quarter pipe arrives to your door in kit form and ready to be assembled! Only need a drill to install.
Our instructions manual (and photos) will make this ramp extremely simple to build.
Unicorn image engraved into plywood side. Pre-paint with the shown colors.
All materials are designed for outdoor use.
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
