A shoe box made for skate sessions
The éS x OC Ramps Shoe Box turns a familiar skate-shoe box into a full-size ledge. Two eight-foot coping edges give you room for grinds and slides, while the oversized box shape brings a different look to your spot. It arrives assembled, so there is no kit build between delivery and setting it in place.
Put the shoe-box shape in your spot
This collaboration between éS and OC Ramps takes the shoe-box shape out of the shop and into the session. Choose it when you want the look of the obstacle to be part of the spot, alongside the tricks you plan to skate on it.
Work both eight-foot coping edges
Coping runs along both eight-foot sides, giving you two long edges for grinds and slides. Plan a 50-50 or boardslide approach around the side you want to skate, and leave room to roll away. Position the box so the second edge stays useful instead of disappearing against a wall.
Choose the ledge height you want to skate
The ledge stands 15.5 inches high. Compare that height with the box or curb you already practice on and the tricks you want to take to this one. Our Ramp Shape guide explains how an obstacle's shape changes the approach and the kind of session it invites.
Measure the box and the riding paths
The Shoe Box is eight feet long and four feet wide. Mark out that footprint, then leave additional space for the approach and exit on each side you intend to skate. Our Space and Fit guide walks through the measurements that make the whole setup usable.
Make room for an assembled ledge
The Shoe Box arrives already assembled. Check the access route to its final position before delivery, taking the four-foot width and eight-foot length into account. You can skip the assembly project, but planning how the full-size obstacle reaches your skate spot is still part of getting ready.
What's in the Box
- One éS Shoe Box Skate Ledge
Free shipping in the U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Arrives assembled and ready to place
The éS Shoe Box Skate Ledge requires no assembly. Reserve level space for its four-by-eight-foot body and keep both coping sides open before the assembled obstacle is moved into its final position.
Questions about éS Shoe Box Skate Ledge
How does the éS Shoe Box compare with the HUF Shoe Box Ledge?
Both measure 15.5 inches high, four feet wide and eight feet long, with coping along both long sides. Choose between the éS and HUF collaboration designs based on the look you want in your setup.
Why choose the éS Shoe Box instead of a plain grind box?
The éS collaboration brings an oversized shoe-box design to a ledge for grinds and slides. Choose it when that design is part of what you want in the spot, then compare the footprint and skating edges with the other box you are considering.
Does the setup need access to both coping edges?
Leaving access to both long sides lets you use both coping edges. If one side faces a wall or another obstacle, account for that when planning your approaches and deciding whether the four-foot-wide box suits the space.
What tricks can riders practice on the éS Shoe Box Skate Ledge?
Use the éS Shoe Box Skate Ledge for ledge skills such as 50-50 grinds, boardslides, noseslides, and ollies on or off the obstacle. Where the top and geometry support it, riders can also work on manuals and nose manuals.
Can I return the éS Shoe Box Skate Ledge if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Specifications
Height: 15.5 inches
Width: 4 feet
Length: 8 feet
Tools Needed: Drill
Assembly Time: NONE!
Shipping Cost: FREE!
Shipping & Product Info
éS Shoe Box – Skate Ledge arrives to your door already assembled and ready to skate!
All materials are designed for outdoor use.What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
