A low four-foot kicker for a focused launch decision
The GB Kicker Ramp is a nine-inch-high, four-foot-long obstacle with a 19-inch width, a short assembly window, and a one-quart Skate Paint requirement. It suits a rider choosing a compact kicker instead of a taller bank or a long multi-part launch feature.
A nine-inch kicker keeps the launch low
The GB Kicker Ramp measures 9 inches high. That low profile makes it a different choice from a tall bank or large transition. It works best when the session needs a compact launch target without turning a small area into a major ramp installation.
Four feet long and 19 inches wide
The GB Kicker Ramp measures 4 feet long and 19 inches wide. Those dimensions define a narrow, focused obstacle. Leave clear pavement on the approach and exit, because the usable riding path is larger than the four-foot structure alone and needs a straight entry.
Ten minutes and a drill for the build
Assembly requires a drill and takes about 10 minutes. That short estimate is useful for planning, not a reason to rush the finished obstacle. Organize the parts, complete the build on level ground, align the nine-inch connection profile, and inspect the kicker before riding.
Paint belongs to the exposed wood
One quart of Skate Paint is specified for the GB Kicker Ramp. That quantity is tied to the kicker's exposed plywood and outdoor-care needs. Treat the coating as part of maintaining this wood feature, not as a generic add-on for any obstacle.
Build launch and grind lines around the GB Kicker
Use the GB Kicker as a compact launch, or align its nine-inch height and 19-inch width with a compatible OC Ramps Grind Box to create a focused approach. Riders can work on controlled launches, ollies, and box tricks while keeping a straight run-in and clear roll-away around the full setup.
What's in the Box
- One GB Kicker ramp
Free shipping in the U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Assembly details
For GB Kicker Ramp, assembly is estimated at 10 minutes and the tools are drill. Follow the product instructions for the exact kit.
Questions about GB Kicker Ramp
How is the GB Kicker intended to work with an OC Ramps Grind Box?
The nine-inch height and 19-inch width align with the Grind Box profile, allowing the kicker to form a planned approach into the box. Choose the Grind Box length separately, then map the combined route so the connection improves the session instead of crowding it.
Why would I choose the GB Kicker over the Wedge Bump?
Choose the GB Kicker when its narrow profile and Grind Box relationship are the priority. Choose the broader Wedge Bump when a more general launch or connector fits the obstacle mix. The better ramp is the one that solves the actual route as opposed to the one with the bigger footprint.
Can the GB Kicker connect with different Grind Box lengths?
Yes. Its matching nine-inch height and 19-inch width support the Grind Box profile while the box length is chosen as a separate product. Plan enough pavement for the selected length and kicker together so the combined feature has a usable run-in and roll-away.
How can riders use the GB Kicker Ramp?
Use the GB Kicker Ramp as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.
Can I return the GB Kicker Ramp if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Specifications
Weight: 30 lbs, 20 lbs
Height: 9 inches (same as Grind Box)
Width: 19 inches (same as Grind Box)
Length: 4 feet
Tools Needed: Drill
Assembly Time: 10 minutes
Shipping Cost:FREE!
Skate Paint: Requires 1 quart
Shipping Info
Designed for best portability — move and connect to your grind box with ease
Update improvements to design: black logo is no longer included in kits.
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
