Eight feet of The Equation across the coping
The Dave and Cody 8 Foot Quarter Pipe is a substantial, broad transition for a home setup that wants more coping width without becoming a half pipe. Rear caster wheels make its size more practical when the space has to serve more than skating. It is best chosen for the rider who will use its extra width often.
Plan for a wide, substantial quarter pipe
This quarter pipe is 3 feet 2 inches tall, 8 feet wide, 6 feet 5 inches deep, and 350 pounds. The broad coping span is the reason to choose it, so leave the approach and exit clear enough to use that width. Measure where it will skate, move, and rest before delivery.
Use the full coping span
Eight feet across gives the Dave and Cody transition room for a rider to work along the coping rather than aiming at one narrow point. It is a good fit when the session benefits from a broad return feature. The decision is about the type of transition the setup needs, not simply choosing the largest available width.
Protect wood without changing the riding surface
Two plywood riding layers are included, and the two-quart Skate Paint option protects exposed plywood. GatorSkins and Skatelite Pro are not available surface choices for this ramp. Choose paint when the exposed wood needs protection, and keep the Equation artwork separate from that finish decision.
Use the drill and wrench plan
The build calls for a drill, a wrench, and about two to three hours. Pre-cut boards, galvanized metal parts, and photo instructions make the process traceable when the pieces stay organized. Set up a level work area first, then check the fasteners and transition connections before the ramp goes into use.
Move it when the setup changes
Rear caster wheels are a practical reason to choose this eight-foot ramp when the space also needs to be cleared or rearranged. Plan a storage path before assembly, not after. That gives the ramp a repeatable home between sessions without treating a 350-pound feature as permanently fixed by accident.
What's in the Box
- One Dave and Cody 8-foot-wide quarter pipe in the selected Skate Paint configuration
- Exterior-grade lumber and plywood parts
- Pre-counted rust-resistant screws and required galvanized metal parts
- Pre-cut and pre-drilled boards with computer-cut transition pieces
- Photo instruction booklet
Shipping to the contiguous U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Dave and Cody 8 Foot Quarter Pipe freight delivery
The kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.
Assembly planning
Assembly uses a drill and wrench and takes about 2 to 3 hours. Build on a level foundation with the required tools and follow the photo instructions.
Questions about Dave and Cody 8 Foot Quarter Pipe
What differs between the Dave and Cody Quarter Pipe and the standard 8 Foot Wide Quarter Pipe?
Both are 3 feet 2 inches tall, 8 feet wide, 6 feet 5 inches deep, and 350 pounds. Both use rear casters, two plywood riding layers, and an optional two-quart paint choice. The Dave and Cody version adds The Equation identity. Choose it when that signature context matters; choose the standard model when the same geometry, mobility, and surface configuration are the priority.
How does the Dave and Cody 8 Foot Quarter Pipe compare with the Unicorn Quarter Pipe Ramp?
Both use a 6-foot-5-inch depth and rear wheels, but the Dave and Cody ramp is 3 feet 2 inches tall, 8 feet wide, 350 pounds, and offers two quarts of Skate Paint. The Unicorn is 2 feet 6 inches tall, 6 feet wide, 185 pounds, and offers one quart with its engraved graphic. Choose the broader Equation transition or the smaller Unicorn identity and footprint.
When should I choose the six-foot quarter pipe instead of the Dave and Cody eight-foot model?
Both are 3 feet 2 inches tall and 6 feet 5 inches deep, with two plywood layers, rear casters, and a two-quart paint option. The six-foot model weighs 215 pounds, while Dave and Cody is eight feet wide and 350 pounds. Choose six feet when storage and approach width matter more than the extra coping span or Equation identity.
What can riders practice on the Dave and Cody 8 Foot Quarter Pipe?
Use the Dave and Cody 8 Foot Quarter Pipe for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.
Can I return the Dave and Cody 8 Foot Quarter Pipe if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Specifications
Weight: 350 lbs
Height: 3 feet, 2 inches
Width: 8 feet
Length/Depth: 6 feet, 5 inches
Tools Needed: Drill and Wrench
Assembly Time:2-3 hours
Shipping Cost: FREE!
Skate Paint: Requires 2 quarts
Shipping & Product Info
This quarterpipe arrives to your door in the kit form. Everything comes boxed up– ready to go! Only need a drill to install.
Our instructions manual (of course there’s photos) makes this ramp easy to assemble and ready for a sesh.
Quarterpipe comes with caster wheels on the back– designed to be easy to store when not in use. All materials are designed for outdoor use.
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
