OC Ramps Quarter Pipe Ramps – Two 6 Foot — rear view — backyard quarter pipe ramp kit

Pair of 6 Foot Quarter Pipe Ramps

None
$2,069.00
Skip to product information
OC Ramps Quarter Pipe Ramps – Two 6 Foot — rear view — backyard quarter pipe ramp kit
  • OC Ramps Quarter Pipe Ramps – Two 6 Foot — rear view — backyard quarter pipe ramp kit
  • OC Ramps Quarter Pipe Ramps – Two 6 Foot — backyard quarter pipe ramp kit
  • OC Ramps Quarter Pipe Ramps – Two 6 Foot — top-down view — backyard quarter pipe ramp kit
  • OC Ramps Quarter Pipe Ramps – Two 6 Foot — beginner DIY quarter pipe kit
  • OC Ramps Quarter Pipe Ramps – Two 6 Foot — buy quarter pipe ramp
  • Video of Quarter Pipe with skater by OC Ramps
Pair of 6 Foot Quarter Pipe Ramps

Pair of 6 Foot Quarter Pipe Ramps

4.8
Rated 4.8 out of 5 stars
8 Reviews
$2,069.00
With Skate Paint

More room across the transition. Twice.

When you want a wider approach without making the ramp taller, the six-foot pair gives both ends of your session more room. Each quarter pipe stands three feet two inches tall and offers six feet of riding width. Face them together for repeated runs or let each one serve its own line, with rear casters to help when the layout changes.

OC Ramps Quarter Pipe Ramps – Two 6 Foot — backyard quarter pipe ramp kit

Find your line with a wider approach

Compared with the four-foot pair, each six-foot ramp adds two feet of width while keeping the same height and depth. That extra span gives you more room across the transition to choose your approach and work toward the coping. Choose it because those wider faces will get used. Our Ramp Shape guide helps you weigh width separately from height.

Give each ramp its own place in the layout

Every ramp is six feet wide, six feet five inches deep and three feet two inches tall. There are two of those bodies to place, with open ground between them for the session you want. The pair is not a joined half pipe or one 12-foot-wide ramp. Our Space and Fit guide helps you map each footprint, approach and exit.

OC Ramps Quarter Pipe Ramps – Two 6 Foot — beginner DIY quarter pipe kit
OC Ramps Quarter Pipe Ramps – Two 6 Foot — top-down view — backyard quarter pipe ramp kit

Keep the wider setup adaptable

Each ramp weighs 216 pounds and has rear caster wheels for repositioning. Decide how you will move each one between its skating and storage positions before adding obstacles along those routes. The value is having a layout you can change deliberately, not being tied to the first arrangement. Our Site Preparation guide helps you think through the surface and access.

Build the second ramp with a clear reference

The kit provides pre-cut and pre-drilled wood components, counted screws, required metal parts and photo instructions. Have a drill and wrench ready, and keep each ramp's components grouped while you work. Completing one before starting the other gives you a finished reference without mixing the two builds. Our Kit Assembly guide helps you set up the work area.

OC Ramps Quarter Pipe Ramps – Two 6 Foot — buy quarter pipe ramp
OC Ramps Quarter Pipe Ramps – Two 6 Foot — rear view — backyard quarter pipe ramp kit

Two plywood layers, plus a coating choice

Both ramps include two plywood riding layers. The optional one-gallon Skate Paint selection serves a separate purpose: protecting the exposed wood across the pair. It does not add a riding sheet or replace the plywood layers. Our Riding Surfaces guide explains those roles, so you can make the surface and care decisions with the actual configuration in mind.

What's in the Box

Two 6-foot quarter pipe ramps in the selected Skate Paint configuration

Exterior-grade lumber and plywood parts

Pre-counted rust-resistant screws and required galvanized metal parts

Pre-cut and pre-drilled boards with computer-cut transition pieces

Photo instruction booklet

Specs

Per-ramp dimensions and options

Quantity 2 ramps
Per-ramp height 3 feet 2 inches
Per-ramp width 6 feet
Per-ramp depth 6 feet 5 inches
Per-ramp weight 216 pounds
Mobility Rear caster wheels
Position options Facing, separated, or stored
Included riding layers 2 plywood layers
Skate Paint option Optional 1-gallon selection for exposed plywood across the pair
Skate Paint application Exposed plywood across the pair only
do not apply over GatorSkins or Skatelite Pro
Tools Drill and wrench

Shipping, Delivery & Assembly

Shipping to the contiguous U.S.

Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.

Pair of 6 Foot Quarter Pipe Ramps freight delivery

This product ships by freight. OC Ramps will confirm delivery timing and the receiving requirements for the exact order. Inspect the shipment when it arrives and report visible damage promptly.

Assembly planning

Use a drill and wrench to assemble the two ramps. Follow the photo instructions and build each ramp on a level foundation.

Pay Over Time

Check Pre-Qualification Budget & Financing Guide

See provider terms for full details.
4.8
Rated 4.8 out of 5 stars
Based on 8 reviews
100%would recommend this product
Slide 1 selected
Write a Review (Opens in a new window)
8 reviews
  • JR
    Joshua R.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    6 years ago
    5 Stars

    We purchased 2 of the 3'2" tall 6' wide quarter pipes and set them up in our garage. We connected the 2 ramps with a layer of plywood and then a layer of hardboard to create a half pipe. We considered getting the garage mini-ramp, but the stock dimensions weren't a good fit for our garage and I also wanted to go 1' taller than the mini-ramp. Our kids (and I) love skating this ramp. I highly recommend this ramp and, if you have the space, installing it in your garage...it only takes up 1 parking spot in our garage, and the fact that it's indoors means it gets a ton of usage and does not require weather-proofing.

    Was this helpful?
  • PL
    Paul L.
    Verified Buyer
    I recommend this product
    Rated 4 out of 5 stars
    7 years ago
    4 Stars

    I took a few hours on a Saturday afternoon and put the 6' wide quarter pipe together with my teenage son. We only used 1 drill and it still went together easily. The one thing that wasn't easy to work with was the skate paint- thick & took a couple days to dry cus my temps

    Was this helpful?
  • WG
    William G.
    Verified Buyer
    I recommend this product
    Rated 4 out of 5 stars
    9 years ago
    4 Stars

    Very well designed ramp and came with easy to follow instructions. I was also very impressed with the speed at which it was shipped. Overall a great experience!

    Was this helpful?
  • EH
    Erik H.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    8 years ago
    5 Stars

    Great ramps and facility. Awesome owners.

    Was this helpful?
  • MP
    Mark P.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    9 years ago
    5 Stars

    Easy transaction and super fast shipping! Ordered a ramp for my 11 & 12 year old boys and it is a great product. They love it.

    Was this helpful?

Frequently Asked Questions

Questions about Pair of 6 Foot Quarter Pipe Ramps
When does the Pair of 6 Foot Quarter Pipe Ramps make more sense than one six-foot ramp?

The single model provides one 215-pound transition. This pair provides two matching 216-pound transitions, each with the same 3-foot-2-inch height, 6-foot width, 6-foot-5-inch depth, and rear casters. Choose the pair only when facing or separate approaches add a real session benefit and the site can carry two movement and storage plans. Otherwise, the single ramp preserves more open ground.
How does the Pair of 6 Foot Quarter Pipes compare with the four-foot pair?

Both pairs use 3-foot-2-inch-tall, 6-foot-5-inch-deep ramps with rear casters. Each six-foot ramp weighs 216 pounds and adds two feet of coping span beyond each 175-pound four-foot ramp. The six-foot pair also uses a one-gallon Skate Paint choice, while the four-foot pair uses two quarts. Choose by usable coping width, two complete footprints, and the movement routes the site can maintain.
How does the Pair of 6 Foot Quarter Pipes differ from a 12 Foot Wide Half Pipe?

The pair supplies two independent six-foot-wide transitions that can change position on rear casters. The 12 Foot Wide Half Pipe is one connected 3.5-foot-tall structure, 22 feet 8 inches long, with one optional 5-foot corner. Choose the pair when two movable approaches serve the site. Choose the half pipe when the property can support a fixed, wider back-and-forth layout and its corner decision.
What can riders practice with Pair of 6 Foot Quarter Pipe Ramps?

Face the pair for back-and-forth transition runs or use each quarter pipe as a separate return point in a larger line. Common progression includes kickturns, rock-to-fakies, axle stalls, and transfers that match the rider's ability and the available clearance.
Can I return the Pair of 6 Foot Quarter Pipe Ramps if it is not the right fit?

Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.

Need help choosing the right setup?

Our team and guides are here to make sure you get the right ramp the first time.
All Buyer’s Guides