Bring the half-pipe session to your fingerboard
Set the Fingerboard Half Pipe down, grab your board and work both transitions. The assembled wooden ramp has galvanized-metal coping for tricks at the edges, with a three-pound weight that lets the session move to the next spot. Skate it on your own or take turns with friends.
Build a back-and-forth session
The half-pipe form gives you opposing transitions in one fingerboard obstacle. Return from one side to the other as you link turns and transition tricks, or focus on a move at one wall. The connected form keeps both sides together when you reset the spot.
Take the trick to the metal coping
Galvanized metal forms the coping on the exterior-grade lumber ramp. Use those edges as targets for fingerboard stalls or grinds as you work from the transition. The wood-and-metal construction brings familiar ramp materials into the miniature setup.
Make room for twenty-one inches of ramp
The ramp measures twenty-one inches long, ten inches wide and six inches high. Check that footprint against the surface you want to use, with access for your hand at both transitions. Explore the fingerboard ramps collection when choosing another feature for the setup.
Take the session to the next spot
The Half Pipe weighs three pounds and is made to travel between fingerboard spots. Bring it to a friend's setup or move it when the table needs to serve another purpose. Both transitions stay in one piece as the location changes.
Start with a finished ramp
The Fingerboard Half Pipe arrives preassembled. Bring your own fingerboard and choose the spot for the session; there is no ramp kit to build first. Take turns with friends or spend the session working on your own next trick.
What's in the Box
- One preassembled OC Ramps Fingerboard Half Pipe
Free shipping in the U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Questions about Fingerboard Half Pipe
What are the dimensions and weight of Fingerboard Half Pipe?
It measures twenty-one inches long, ten inches wide and six inches high, and weighs three pounds. Allow access to both transitions when choosing its place in the setup.
When should I consider one Fingerboard Quarter Pipe instead?
Choose a single Quarter Pipe when you want one transition you can place independently. The Half Pipe brings opposing transitions together in one obstacle for a back-and-forth session.
What could I add alongside a Fingerboard Half Pipe?
A fingerboard launch, ledge or manual pad can add another kind of trick to the setup. Choose the next feature around the line you want to skate and the room available.
What fingerboard tricks work with the Fingerboard Half Pipe?
Link turns between the transitions, or work on stalls and grinds at the metal coping. Leave access for your hand at both ends so you can follow the board through the trick.
Specifications
Weight: 3 lbs
Height: 6 inches
Width: 10 inches
Length: 21 inches
Shipping Cost: FREE!
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
