Three obstacle jobs in one compact build
Greg Lutzka's 3 in 1 Quarter Pipe is a small obstacle that avoids being a one-trick purchase. Its compact geometry can be approached as a quarter pipe, ledge, or launch ramp, making it a smart choice when floor space is limited but the session still needs variety.
Fit three jobs into a compact footprint
At 12 inches tall, 4 feet wide, and 39 inches long, the Greg Lutzka 3 in 1 Quarter Pipe is built for a compact part of the setup. Its 65-pound weight helps keep the scale practical. Plan enough open ground around each usable face so the obstacle can change jobs without changing location.
Choose the approach, change the obstacle
This piece can serve as a quarter pipe, a ledge, or a launch ramp depending on how it is approached. That is the buying decision: one object that can invite different tricks instead of a fixed obstacle with one narrow purpose. Set it where each approach can remain clear and choose the job the session needs that day.
Match the top surface to the use
The 3 in 1 can be selected with plywood or Skatelite for the top skating surface. The optional one-quart Skate Paint choice protects exposed plywood and stays off the Skatelite surface. Choose the riding material first, then add paint only where wood remains exposed.
Build it once, then keep it versatile
Assembly calls for a drill and about 45 to 60 minutes. The pre-cut and pre-drilled parts, counted fasteners, and photo instructions keep the build focused without turning the obstacle into a fabrication project. Use a level foundation and check the hardware before trying the piece from its different approaches.
Let the next obstacle do something else
Because this one piece already covers transition, ledge, and launch roles, do not crowd it with a duplicate job. If the setup grows, add an obstacle that creates a different type of movement while keeping the 3 in 1's approaches open. That is how a small collection stays fun instead of feeling cramped.
What's in the Box
- One Greg Lutzka 3-in-1 Quarter Pipe
- Exterior-grade lumber and plywood parts
- Pre-counted rust-resistant screws and required galvanized metal parts
- Pre-cut and pre-drilled boards with computer-cut transition pieces
- Photo instruction booklet
Shipping to the contiguous U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Freight delivery: what to expect
The kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.
Assembly planning
Assembly uses a drill and takes about 45 to 60 minutes. Build on a level foundation with the required tools and follow the photo instructions.
Questions about Greg Lutzka 3 in 1 Quarter Pipe
How does the Greg Lutzka 3 in 1 differ from the GRL Combo?
The Greg Lutzka model is one 12-inch-tall, four-foot-wide obstacle that serves as a quarter pipe, ledge, or launch ramp according to the approach. The GRL Combo is three separate pieces: a six-foot grind box, an orange rail, and a launch ramp. Choose one compact multi-role object or three rearrangeable obstacles.
How does the Greg Lutzka 3 in 1 compare with the 4 Foot Wide Quarter Pipe?
The Greg Lutzka 3 in 1 is 12 inches tall, 4 feet wide, 39 inches long, and 65 pounds, with quarter-pipe, ledge, and launch-ramp uses. The 4 Foot Wide Quarter Pipe is 3 feet 2 inches tall, 6 feet 5 inches deep, and 175 pounds. Choose compact versatility or a taller dedicated transition.
What should I plan if the Greg Lutzka 3 in 1 must move between sessions?
At 65 pounds, the Greg Lutzka 3 in 1 is compact but should not be treated like a lightweight accessory. Choose its skating and storage positions before assembly, keep the movement route clear, and plan appropriate help if it will change locations regularly. The product's small footprint does not mean one person should carry it.
Can the Greg Lutzka 3 in 1 replace three full-size obstacles?
It gives one compact obstacle three uses: quarter pipe, ledge, and launch ramp. That versatility is the advantage, but its 12-inch height and four-foot width remain fixed. Choose it for compact variety, not as a claim that it duplicates three larger features.
What if I need a taller or wider version of the 3 in 1?
This Greg Lutzka model keeps its 12-inch height and four-foot width. Compare another obstacle when a larger transition or longer ledge is the real need, or use the custom-build path to discuss a different footprint instead of assuming this product scales.
Specifications
Weight: 65 lbs
Height: 12 inches
Width: 4 feet
Length: 39 inches
Tools Needed: Drill
Assembly Time: 45-60 minutes
Shipping Cost: FREE!
Skate Paint: Requires 1 quart
Shipping & Product Info
Greg Lutzka 3 in 1 Quarter Pipe arrives with everything boxed up with easy step by step instructions. Therefor it’s ready for assembly!
Hardware included. Only a drill is needed for installation on this quarterpipe.
All materials are designed for outdoor use.
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
