A matched pair with six feet across each transition
A Pair of 6 Foot Quarter Pipes is a versatile choice when the setup needs two broader transitions and the freedom to rearrange them. Each ramp has enough width to stand on its own, while rear caster wheels keep the pair from becoming a permanently fixed layout decision.
Give both six-foot ramps their own room
Each ramp is 3 feet 2 inches tall, 6 feet wide, 6 feet 5 inches deep, and 216 pounds. The buyer is choosing two complete transitions, not a single double-width feature. Measure the place for each ramp and the distance between them before deciding whether they should face, separate, or store independently.
Build a two-ramp session, not a bottleneck
The pair can face each other for repeated back-and-forth movement, sit apart for separate approaches, or change arrangement later. Six feet of width lets each ramp perform on its own. Choose a layout that gives both transitions air, rather than using the second ramp to block the approach that makes the first one enjoyable.
Keep layered plywood and paint in their lanes
Each configuration includes two plywood riding layers, while the optional one-gallon Skate Paint selection protects exposed plywood across the pair. Paint is not a GatorSkins or Skatelite Pro substitute. Use it for visible wood protection while keeping the two layered-plywood ramps as the core configuration.
Use a drill-and-wrench plan for the pair
Plan about two to three hours with a drill and wrench. Build each six-foot ramp as its own organized unit, using the pre-cut parts, counted hardware, and photo instructions. A completed first ramp gives the team a useful reference before the second set of pieces is opened and assembled.
Move the pair when the room changes
Rear caster wheels help the pair shift between skating positions and storage. They matter most when the buyer has already planned the travel paths and the locations where each ramp will sit. That makes movement a repeatable part of ownership rather than an emergency solution after the setup gets crowded.
What's in the Box
- Two 6-foot quarter pipe ramps in the selected Skate Paint configuration
- Exterior-grade lumber and plywood parts
- Pre-counted rust-resistant screws and required galvanized metal parts
- Pre-cut and pre-drilled boards with computer-cut transition pieces
- Photo instruction booklet
Shipping to the contiguous U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Pair of 6 Foot Quarter Pipe Ramps freight delivery
The kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.
Assembly planning
Assembly uses a drill and wrench and takes about 2 to 3 hours. Build on a level foundation with the required tools and follow the photo instructions.
Questions about Pair of 6 Foot Quarter Pipe Ramps
When does the Pair of 6 Foot Quarter Pipe Ramps make more sense than one six-foot ramp?
The single model provides one 215-pound transition. This pair provides two matching 216-pound transitions, each with the same 3-foot-2-inch height, 6-foot width, 6-foot-5-inch depth, and rear casters. Choose the pair only when facing or separate approaches add a real session benefit and the site can carry two movement and storage plans. Otherwise, the single ramp preserves more open ground.
How does the Pair of 6 Foot Quarter Pipes compare with the four-foot pair?
Both pairs use 3-foot-2-inch-tall, 6-foot-5-inch-deep ramps with rear casters. Each six-foot ramp weighs 216 pounds and adds two feet of coping span beyond each 175-pound four-foot ramp. The six-foot pair also uses a one-gallon Skate Paint choice, while the four-foot pair uses two quarts. Choose by usable coping width, two complete footprints, and the movement routes the site can maintain.
How does the Pair of 6 Foot Quarter Pipes differ from a 12 Foot Wide Half Pipe?
The pair supplies two independent six-foot-wide transitions that can change position on rear casters. The 12 Foot Wide Half Pipe is one connected 3.5-foot-tall structure, 22 feet 8 inches long, with one optional 5-foot corner. Choose the pair when two movable approaches serve the site. Choose the half pipe when the property can support a fixed, wider back-and-forth layout and its corner decision.
What can riders practice with Pair of 6 Foot Quarter Pipe Ramps?
Face the pair for back-and-forth transition runs or use each quarter pipe as a separate return point in a larger line. Common progression includes kickturns, rock-to-fakies, axle stalls, and transfers that match the rider's ability and the available clearance.
Can I return the Pair of 6 Foot Quarter Pipe Ramps if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Specifications
Weight: 216 lbs each
Height: 3 feet, 2 inches
Width: 6 feet
Length/Depth: 6 feet, 5 inches
Tools Needed: Drill and Wrench
Assembly Time: 2-3 hours
Shipping Cost: FREE!
Skate Paint: Requires 1 quart
Shipping & Product Info
These 6′ quarterpipes arrive to your door in the kit form, all packaged up and ready to be built to shred! Only need a drill to install.
Our instructions manual (duh, we added photos) makes this ramp extremely simple to build.
Quarterpipes comes with caster wheels on the back– designed to be portable. All materials are designed for outdoor use.
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
