Bring a bump into your rail session
Bump to Butter pairs a twelve-inch bump with a seventeen-inch rail for a different approach to grinds and slides. The Butter surface uses a custom plastic composite, giving this setup a distinct rail to work on as you plan the next trick in your line.
Put the bump into the approach
The twelve-inch bump changes the approach to the seventeen-inch rail. Choose this feature when you want to work on taking a trick from a ramp onto a rail, with repeated attempts on the same setup. Plan the run-in and landing space around the trick you want to practice.
Meet the Butter surface
The Butter sliding surface is a custom plastic composite, rather than the metal surface of a traditional skate rail. If grinds and slides are the focus of your sessions, that material is a key part of choosing this setup. Get familiar with its feel as you work on the tricks you want to repeat.
Choose whether to add the flat section
Choose Bump only or Bump + Flat Section. The optional flat section adds thirty inches to the setup, so include that extra length when planning your spot. Our Space and Fit guide helps you leave room for the approach and roll-away as well as the obstacle itself.
Build it with a drill and photo instructions
Bump to Butter arrives in kit form with an instruction manual and photos. Allow an estimated one to two hours for assembly using a drill. Set out the parts before starting so you can follow the build sequence and prepare the feature for its place in your line.
Include wood care in the build
Plan for one quart of Skate Paint for the wooden ramp sections. Account for applying the coating before the first session, then keep the ramp's care in your routine. Our Ramp Care guide helps you look after the setup as the sessions add up.
What's in the Box
- One Bump to Butter kit in the selected configuration
- Required assembly hardware
- Photo instruction booklet
Free shipping in the U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Assembly details
Bump to Butter has an estimated one-to-two-hour assembly window and requires a drill. Build the bump, rail, and Butter surface as one connected feature, then confirm their alignment on level pavement.
Questions about Bump to Butter Skate Obstacle
How does Bump to Butter differ from Bump to Rail?
Bump to Butter uses a custom plastic composite for its sliding feature. Bump to Rail offers a welded rail obstacle. Compare the type of grind or slide you want to work on and the material you prefer under your board or trucks.
What is the difference between Bump only and Bump + Flat Section?
Bump + Flat Section adds a flat section that extends the setup by thirty inches. Choose Bump only for the version without that extension, or add the flat section when the extra length serves the line you want to skate. Include the extension in your space plan.
How do I choose between this combo and separate obstacles?
Start with the route you want to skate and whether the same bump-and-slide approach will get regular use. If you want to place obstacles on different routes, compare individual products and their setup requirements. For Bump to Butter, choose between the Bump only and Bump + Flat Section versions to suit your plan.
How can riders use the Bump to Butter Skate Obstacle?
Use the Bump to Butter Skate Obstacle as a line-building obstacle for launches, ollies, and other tricks that fit its exact shape. Give the feature a straight approach and clear landing or exit, then progress from basic rollovers and controlled launches within the rider's ability.
Can I return the Bump to Butter Skate Obstacle if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Specifications
Weight: 68 lbs, 125 lbs
Height: Bunp: 12 inches, Rail: 17 inches
Width: 4 feet
Length: 8 feet
Tools Needed: Drill
Assembly Time: 1-2 hours
Shipping Cost: FREE!
Skate Paint: Requires 1 quart
Shipping & Product Info
Bump to Butter arrives to your door in kit form. Everything comes boxed up– ready to go! Only need a drill to install.
Our instructions manual (with photos) makes this ramp extremely simple to build. All materials are designed for outdoor use.
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
