A compact quarter pipe that flies the flag
The American Flag Quarter Pipe puts a recognizable graphic on a small, usable transition. It is built for a garage or backyard that needs one approachable place to turn, launch, and work the coping without pretending to be a whole park. The flag artwork is part of the product, not a generic decoration added afterward.
Give a compact transition a real footprint
This ramp is 2 feet tall, 3 feet 2 inches wide, 4 feet deep, and 70 pounds. Its compact scale makes placement possible in smaller home spaces, but it still needs an approach and exit that are not blocked by storage or walls. Measure the skating area, not just the rectangle under the ramp.
Let the flag graphic be the reason
The American Flag graphic is the defining finish of this exact quarter pipe. Choose it when that visual identity belongs in the setup, not because a generic quarter pipe happens to fit the same space. The two-foot transition keeps the feature approachable while the graphic keeps it unmistakably its own.
Order the graphic as it is offered
This graphic quarter pipe is offered without a separate Skate Paint option. That means the purchase decision is the American Flag ramp shown here, rather than a plywood-versus-paint or premium-sheet comparison. GatorSkins, Skatelite Pro, and Skate Paint are not available choices for this product.
Build the flag ramp before the session
Plan about 30 to 45 minutes with a drill. The package provides a finished kit with pre-cut, pre-drilled transition parts, counted hardware, and photo instructions. Set the pieces out in order on a level surface so the short build stays straightforward and the graphic ramp is ready to skate.
Make it the setup's first destination
A two-foot quarter pipe can give a newer or returning rider a dependable transition to revisit throughout a session. Place the American Flag ramp where its coping and roll-away stay open. If the setup expands later, add only a feature that creates a different job instead of choking off the route back to the ramp.
What's in the Box
- One American Flag 3-foot-wide quarter pipe kit
- Photo assembly instructions
- Pre-counted rust-resistant screws and required galvanized metal parts
- Pre-cut and pre-drilled boards with computer-cut transition pieces
Shipping to the contiguous U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Boxed kit delivery
The kit arrives packaged for assembly. Keep the components together, inspect the shipment when it arrives, and report any visible damage promptly.
Assembly planning
Assembly uses a drill and takes about 30 to 45 minutes. Build on a level foundation with the required tools and follow the photo instructions.
Questions about American Flag Quarter Pipe Ramp - 3 Foot Wide
How does the American Flag Quarter Pipe compare with Greg Lutzka's 3 in 1?
The American Flag ramp is a dedicated two-foot quarter pipe, 3 feet 2 inches wide and 4 feet deep, with its graphic fixed to the product. Greg Lutzka's 3 in 1 is 12 inches tall, 4 feet wide, and 39 inches long, and can work as a quarter pipe, ledge, or launch ramp. Choose dedicated transition height or compact multi-use variety.
How does the 3 Foot Wide American Flag Quarter Pipe Ramp compare with the Jack-O Quarter Pipe?
The American Flag and Jack-O quarter pipes share the same 2-foot height, 3-foot-2-inch width, 4-foot depth, 70-pound weight, 30-to-45-minute build, and no separate Skate Paint choice. Choose the American Flag model when its flag artwork belongs in the setup; choose Jack-O when the Halloween graphic is the identity you want. Their physical plan does not decide between them.
Can the American Flag Quarter Pipe be used outdoors?
Yes. This quarter pipe is made for indoor or outdoor use. Place it on a level foundation, keep the approach and roll-away clear, and retain the fixed American Flag finish rather than assuming a separate paint or premium-sheet package is part of this ramp.
What can riders practice on the American Flag Quarter Pipe Ramp - 3 Foot Wide?
Use the American Flag Quarter Pipe Ramp - 3 Foot Wide for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.
Can I return the American Flag Quarter Pipe Ramp - 3 Foot Wide if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Specifications
Height: 2 feet
Width: 3, 2 inches
Length: 4 feet
Weight: 70lbs
Tools Needed: Drill
Assembly Time: 30-45 minutes
Shipping Cost: FREE!
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
