A compact quarter pipe with a Halloween grin
The Jack-O Quarter Pipe brings a seasonal graphic to a compact home transition. It is a choice for a rider who wants a recognizable piece of the setup with enough real ramp underneath it to turn, launch, and revisit through a short garage or backyard session.
Keep the compact footprint usable
The Jack-O Quarter Pipe is 2 feet tall, 3 feet 2 inches wide, 4 feet deep, and 70 pounds. It can fit a smaller home area, but the session still needs room before and after the transition. Check the available approach and roll-away before making a graphic ramp compete with storage or foot traffic.
Choose the Halloween graphic on purpose
The Jack-O graphic is part of this specific quarter pipe and gives the two-foot transition its seasonal identity. It is not a generic color treatment applied to any ramp. Choose it when the graphic belongs in the setup, while keeping the compact transition's practical job clear: a nearby place to turn and work the coping.
Buy the Jack-O finish as shown
The Jack-O Quarter Pipe is offered with the seasonal graphic and plywood build shown here. It has no separate Skate Paint option, so paint is not another finish choice on this model. The relevant decision is the shown Jack-O graphic on a compact two-foot transition, not an added surface package.
Build the seasonal ramp with a drill
Set aside about 30 to 45 minutes and bring a drill. Pre-cut and pre-drilled boards, counted hardware, and photo instructions turn the kit into a short, defined build. Set up on a level foundation and unpack carefully so the graphic-specific pieces stay protected until the ramp is assembled.
Make a small ramp part of the routine
A compact two-foot transition works best when it is easy to roll up to repeatedly, not hidden behind other obstacles. Put the Jack-O ramp in a place with a clear return route. Any later addition should bring a different skating job and keep the ramp's approach open.
What's in the Box
- One Jack-O Quarter Pipe kit
- Exterior-grade lumber and plywood parts
- Pre-counted rust-resistant screws and required galvanized metal parts
- Pre-cut and pre-drilled boards with computer-cut transition pieces
- Photo instruction booklet
Shipping to the contiguous U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Boxed kit delivery
The kit arrives packaged for assembly. Keep the components together, inspect the shipment when it arrives, and report any visible damage promptly.
Assembly planning
Assembly uses a drill and takes about 30 to 45 minutes. Build on a level foundation with the required tools and follow the photo instructions.
Questions about Jack-O Quarter Pipe Ramp
How does the Jack-O compare with the standard 3 Foot Wide Quarter Pipe?
Both use a compact two-foot-tall, 3-foot-2-inch-wide, four-foot-deep geometry. The Jack-O weighs 70 pounds and keeps its fixed seasonal graphic with no separate Skate Paint choice. The standard model weighs approximately 68 to 70 pounds and offers plywood or Skatelite with optional paint for exposed wood. Choose graphic identity or surface flexibility.
Can the Jack-O Quarter Pipe stay in the setup after Halloween?
Yes. Halloween defines the graphic, not an expiration date for the ramp. Its two-foot transition, coping, and compact footprint continue to serve the same skating job after the season ends. Choose it only if you want the fixed Jack-O artwork to remain part of the setup year-round.
What should I plan if the Jack-O Quarter Pipe must move between sessions?
The Jack-O Quarter Pipe weighs 70 pounds. Choose its skating and storage positions before the build, keep the movement route clear, and plan appropriate help if the ramp must change locations. Its compact size helps with placement, but the approach and roll-away still need to remain open wherever the seasonal graphic ramp is set.
What can riders practice on the Jack-O Quarter Pipe Ramp?
Use the Jack-O Quarter Pipe Ramp for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.
Can I return the Jack-O Quarter Pipe Ramp if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Specifications
Height: 2 feet
Width: 3, 2 inches
Length: 4 feet
Weight: 70lbs
Tools Needed: Drill
Assembly Time: 30-45 minutes
Shipping Cost: FREE!
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
