Cowabunga, with the ramp specs to back it up
The Turtle Half Pipe Ramp pairs a 12-foot-wide home transition with a specific purple, lime-green, and orange identity. Its included taller corner and optional lime-green board guards make it a deliberate build, not a generic half pipe with a costume applied afterward. Choose it when the visual treatment belongs in the space as much as the transition does.
Plan around the included tall corner
The Turtle ramp is 12 feet wide, 22 feet 8 inches long, and 3.5 feet tall with one 5-foot corner extension included. That asymmetry should guide the site layout from the beginning. Reserve clear approaches for both ends and make sure the taller corner has the room it needs before deciding on surface or accessory details.
Keep the Turtle details tied to this ramp
One 5-foot corner extension is part of the Turtle layout, and lime-green board guard rails are available for both decks. Those details make the ramp distinct without replacing the need for a usable skating site. Choose the board guards for this exact Turtle build, then keep the graphic identity and physical layout connected in the final order.
Protect the Turtle without losing its identity
Two plywood riding layers are included, giving the Turtle its complete wood riding stack. Use two gallons of Skate Paint when plywood remains the exposed skating surface. Upgrade to nine GatorSkins sheets in Brown or Green for the best-value dedicated top surface, or choose nine Skatelite Pro sheets for the premium professional-grade surface. Either premium path still uses one quart of Skate Paint on exposed plywood, while the Turtle graphics, included corner, and optional board guards remain part of the same build.
Build the Turtle as a five-to-seven-hour project
Plan five to seven hours with a drill to put the Turtle ramp together. The pre-cut boards, computer-cut transitions, counted hardware, and photo instructions should be staged before construction begins. Prepare a level foundation and protect the selected visual components while the structural work is completed in the documented order.
Quote installation for the actual Turtle site
Set the riding surface, board guards, paint coverage, and labor plan before finalizing the project. That keeps the Turtle graphics and selected upgrades connected to one build. Financing is available with Shop Pay Installments; available plans, rates, and approval depend on the order and buyer eligibility. Paid installation is quoted for the actual address, travel, access, preparation, and timing.
What's in the Box
- One 12-foot-wide Turtle half pipe ramp kit with one 5-foot corner extension
- Two plywood riding-surface layers
- Lime-green board guard rails on both decks when selected
- Nine premium-surface sheets when GatorSkins or Skatelite Pro is selected
- The correct Skate Paint amount when selected: 2 gallons for bare plywood or 1 quart for exposed plywood with a premium surface
- Pre-counted rust-resistant screws and required galvanized metal parts
- Pre-cut and pre-drilled boards with computer-cut transition pieces
- Photo instruction booklet
Shipping to the contiguous U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Turtle Half Pipe Ramp - 12 Foot Wide freight delivery
The kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.
Build it yourself or add installation
Bring a drill and plan 5 to 7 hours to assemble the kit. Paid installation is available by quote. Travel, timing, site preparation, and pricing are quoted for each project.
Questions about Turtle Half Pipe Ramp - 12 Foot Wide
How does the Turtle Half Pipe Ramp compare with the standard 12 Foot Wide Half Pipe?
Both use a 12-foot width, 22-foot-8-inch length, and 3.5-foot base height. The Turtle includes one 5-foot corner and carries its purple, lime-green, and orange identity with optional lime-green board guards. The standard model makes the 5-foot corner optional and does not include that Turtle package. Choose whether the signature corner and visual treatment are required or whether a standard base layout is the better starting point.
How does the Turtle Half Pipe Ramp compare with the 8 Foot Wide Half Pipe?
Both ramps are 22 feet 8 inches long and start at 3.5 feet tall. The Turtle is 12 feet wide and includes one 5-foot corner, while the standard eight-foot model is narrower and makes that corner optional. Choose the Turtle when its wider signature layout belongs in the site; choose eight feet when the smaller width and optional corner preserve a more practical footprint.
What can riders practice on the Turtle Half Pipe Ramp - 12 Foot Wide?
Use the Turtle Half Pipe Ramp - 12 Foot Wide for repeated transition runs and progression on skills such as kickturns, rock-to-fakies, axle stalls, and linking tricks from wall to wall. The exact progression should match the rider's ability, the selected transition, and the clear skating area around the ramp.
How much room should I plan around the Turtle Half Pipe Ramp - 12 Foot Wide?
Start with the assembled dimensions for the selected width, height, corner, and surface configuration. Then leave a clear approach, roll-away, deck access, and enough working room for assembly and maintenance. Confirm the actual site before ordering; the listed product footprint alone is not the same as a complete skating-area plan.
Can I return the Turtle Half Pipe Ramp - 12 Foot Wide if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Can OC Ramps build a custom version of the Turtle Half Pipe Ramp - 12 Foot Wide?
Yes. If the standard width, height, transition, or corner layout does not fit the site or intended riding, start with OC Ramps' Custom Builds page. Share the usable footprint, rider needs, desired transition, access, and location so the project can be evaluated as a custom build instead of forcing a standard kit into the wrong space.
Compare Half Pipes and Mini Ramps.
Plan the ramp before the build.
Specifications
Height: 3.5 feet
Width: 12 feet
Length: 22 feet, 8 inches
Tools Needed: Drill
Assembly Time: 5-7 hours
Shipping Cost: FREE!
Skate Paint: Requires 2 gallons
Shipping & Product Info
The half pipe arrives to your door boxed up and ready to install. All you need of your own is a drill!
Our instruction manual comes with photos, which help make this ramp extremely easy to build.
All materials are designed for outdoor use.
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
