Stars, stripes and a transition to skate
Bring stars and stripes to the spot where you practice your next kickturn. The American Flag Quarterpipe gives you a two-foot-high transition for focused sessions at home, whether it is your main feature or another stop in a longer line.
Make the American Flag design part of your spot
If you want an American Flag design in your setup, this quarter pipe puts it on a ramp you can skate every session. Choose it for the look as well as the transition, with two feet of height to compare against the ramps you already enjoy.
Give a short session a clear focus
Pick a kickturn to work on and give it a session of its own. A single quarter pipe lets you return to the same transition for another attempt, or work that turn into a line with your other obstacles. Leave a clear route back into the ramp for the next run.
Measure beyond the four-foot ramp
The ramp itself is four feet long, but your skating area needs room beyond its base. Mark out the approach and return path as well as the place the ramp will sit. Our Space and Fit guide helps you measure the session, including the clear space around the obstacle.
Put the kit together with a drill
Assembly is estimated at thirty to forty-five minutes with a drill. The kit includes instructions with pictures and pre-cut, pre-drilled boards to guide the build. Lay out the parts and follow the instruction sequence before taking the finished ramp into your skating area.
Choose its home before the build
At 70 pounds, this quarter pipe needs a practical route from the assembly area to its skating spot. Think through where it will stay between sessions and how you will move it when needed. Keep wood care in that plan with our Ramp Care guide.
What's in the Box
- One American Flag Quarterpipe kit
- Photo assembly instructions
- Pre-counted rust-resistant screws and required galvanized metal parts
- Pre-cut and pre-drilled boards with computer-cut transition pieces
Shipping to the contiguous U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Boxed kit delivery
The kit arrives packaged for assembly. Keep the components together, inspect the shipment when it arrives, and report any visible damage promptly.
Assembly planning
Assembly uses a drill and takes about 30 to 45 minutes. Build on a level foundation with the required tools and follow the photo instructions.
Questions about American Flag Quarter Pipe Ramp - 3 Foot Wide
How does the American Flag Quarter Pipe compare with Greg Lutzka's 3 in 1?
The American Flag ramp is a dedicated two-foot quarter pipe, 3 feet 2 inches wide and 4 feet deep, with its graphic fixed to the product. Greg Lutzka's 3 in 1 is 12 inches tall, 4 feet wide, and 39 inches long, and can work as a quarter pipe, ledge, or launch ramp. Choose dedicated transition height or compact multi-use variety.
How does the 3 Foot Wide American Flag Quarter Pipe Ramp compare with the Jack-O Quarter Pipe?
The American Flag and Jack-O quarter pipes share the same 2-foot height, 3-foot-2-inch width, 4-foot depth, 70-pound weight, 30-to-45-minute build, and no separate Skate Paint choice. Choose the American Flag model when its flag artwork belongs in the setup; choose Jack-O when the Halloween graphic is the identity you want. Their physical plan does not decide between them.
Can the American Flag Quarter Pipe be used outdoors?
Yes. This quarter pipe is made for indoor or outdoor use. Place it on a level foundation, keep the approach and roll-away clear, and retain the fixed American Flag finish rather than assuming a separate paint or premium-sheet package is part of this ramp.
What can riders practice on the American Flag Quarter Pipe Ramp - 3 Foot Wide?
Use the American Flag Quarter Pipe Ramp - 3 Foot Wide for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.
Can I return the American Flag Quarter Pipe Ramp - 3 Foot Wide if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Specifications
Height: 2 feet
Width: 3, 2 inches
Length: 4 feet
Weight: 70lbs
Tools Needed: Drill
Assembly Time: 30-45 minutes
Shipping Cost: FREE!
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
