Bring the brick-ledge look into your line
Greg Lutzka's Brick Box combines outer brick paneling with a galvanized-metal construction for a street-style feature you can put in your setup. The six-foot ledge stands twelve inches high, giving you a defined edge to return to for grinds and slides.
Choose the brick-panel look
Designed by Greg Lutzka, the Brick Box uses galvanized metal with outer brick paneling. It brings the look of a brick feature to a purpose-built skate obstacle. Choose it when that street-style character is part of the spot you want to create.
Work along six feet of ledge
The Brick Box gives you a six-foot length for grind-and-slide practice. Use the edge as the focus of a session or work it into a line with another obstacle. Leave enough room to approach the trick and roll away beyond the box.
Choose one coping edge or two
Choose one coping edge when the box will have one main skating side. Add the second when you want to approach both sides and can keep those routes open. Make the choice around where the box will sit and how you want to use it during a session.
Fit a sixteen-inch-deep box into the spot
The box is sixteen inches deep, so mark that depth together with its six-foot length before choosing a position. Keep the approach and exit clear of the next obstacle. Our Space and Fit guide helps you plan where the feature goes and where the skating continues.
Add the ledge without a kit build
The Brick Box arrives with no assembly needed. Work out its route into the skating area and choose its position before delivery. That lets you spend your preparation on the layout instead of putting the box together.
What's in the Box
- One Greg Lutzka Brick Box in the selected coping configuration
Free shipping in the U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Arrives assembled
The Greg Lutzka Brick Box needs no assembly. Choose a level location for the six-foot box, preserve an open route along the selected coping edge or edges, and place the finished obstacle before the session begins.
Questions about Greg Lutzka Brick Grind Box
How should I choose between one coping edge and two?
Choose one coping edge when the ledge will have a primary working side. Choose two when the placement can keep both long sides open and riders will use that access. The second edge adds value only when the surrounding route makes it usable.
How does the Brick Box differ from a standard Grind Box?
The Greg Lutzka Brick Box combines a brick-style signature form with a selectable coping-edge count. A standard Grind Box offers a simpler low ledge in several lengths. Choose the Brick Box when its design and edge choice add value beyond the basic rectangular format.
When should I compare the Brick Box with a skate bench?
Compare them when choosing the shape and edge you want for grind-and-slide sessions. The Brick Box gives you a twelve-inch-high ledge with one or two coping edges. A skate bench brings a different form to the spot. Compare the particular bench's height, working edges and footprint with the line you want to skate.
What tricks can riders practice on the Greg Lutzka Brick Grind Box?
Use the Greg Lutzka Brick Grind Box for ledge skills such as 50-50 grinds, boardslides, noseslides, and ollies on or off the obstacle. Where the top and geometry support it, riders can also work on manuals and nose manuals.
Can I return the Greg Lutzka Brick Grind Box if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
