Make one more run a nightly problem
Garage Mini Ramp Kit is a compact, real half-pipe experience for the places people actually come home to: a garage, basement, backyard, or dedicated corner. Pick the width around the room and the people who will use it, then make a surface choice that respects its tighter transition.
Measure the ramp and the room around it
The standard eight-foot Garage Mini Ramp Kit is 26 inches tall and 15 feet 8 inches long, with 8-, 12-, and 16-foot widths available. Tape out the whole ramp before buying. The useful home setup leaves enough room to enter, exit, carry boards around it, and keep the rest of the space functioning.
Make after-school and after-work sessions easy
This ramp earns its place when it makes a quick session feel possible without a drive or a complicated setup. Choose the width around the riders who will use it most, whether that is a compact personal ramp or a wider shared session. The best choice is the version that will still get skated on an ordinary Tuesday.
Use the surface the tight transition supports
Two plywood riding layers are included, so a plywood build already has its riding stack. Skate Paint protects exposed wood, using one gallon at 8 feet and two gallons at 12 or 16 feet on bare-plywood builds. Skatelite Pro adds a Natural Wood Tan, professional-grade paper-composite outdoor final skating surface for skateboards, scooters, BMX, and roller skates. GatorSkins is not offered because this ramp's tighter transition can crack it.
Build a compact ramp with an organized plan
Plan about four to six hours with a drill for the standard eight-foot kit. Pre-cut, pre-drilled parts, counted hardware, and photo instructions keep the project manageable when the work area is ready. Stage the pieces before starting, protect the chosen surface material, and leave time for a final check before the first session.
Choose a width you will keep using
The width affects more than the first impression: it changes the room across the transition, the selected material quantities, and the commitment the ramp makes to the space. Decide that first, then review financing in an eligible cart or request a paid-installation quote that accounts for the real address, access, timing, and site preparation.
What's in the Box
- One Garage Mini Ramp kit in the selected 8-, 12-, or 16-foot width
- Two plywood riding-surface layers, with Skatelite Pro added when selected
- The correct Skate Paint amount for the selected width and surface when paint protection is selected
- Exterior-grade lumber and plywood parts
- Pre-counted rust-resistant screws and galvanized metal parts
- Pre-cut and pre-drilled boards with computer-cut transition pieces
- Photo instruction booklet
Free shipping in the U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Freight delivery: what to expect
The kit ships by scheduled curbside freight. The carrier calls with a delivery window, and two to three able-bodied adults should be ready to hand-unload and inspect the shipment.
Assembly and installation
Bring a drill and plan 4 to 6 hours to assemble the standard 8-foot kit. Paid installation is available by quote. Travel, timing, site preparation, and pricing are quoted for each project.
Questions about Garage Mini Ramp Kit
How does the Garage Mini Ramp Kit compare with the 8 Foot Wide Half Pipe?
At eight feet wide, the Garage Mini Ramp is 26 inches tall and 15 feet 8 inches long. The 8 Foot Wide Half Pipe is 3.5 feet tall, 22 feet 8 inches long, and can add one 5-foot corner. Garage includes two plywood riding layers and does not offer GatorSkins; the taller model starts with one plywood layer and offers both premium sheets. Choose by transition, length, and surface path.
How much Skatelite Pro and Skate Paint comes with each Garage Mini Ramp width?
Skatelite Pro uses four sheets at 8 feet wide, six at 12 feet, and eight at 16 feet. With Skatelite selected, paint for exposed plywood is one quart at 8 or 12 feet and one gallon at 16 feet. For the included plywood surface, the paint amounts are one gallon at 8 feet and two gallons at 12 or 16 feet.
How can I make the Garage Mini Ramp quieter at home?
Closing the open backs with 3/4-inch plywood can significantly reduce the hollow sound. Softer gel wheels can also lower wheel noise compared with harder wheels. Back panels, hinges, or a storage door are optional custom additions, not standard kit components, so plan them separately and confirm the enclosure approach before changing the ramp.
Can the Garage Mini Ramp Kit be used outdoors?
Yes. The ramp materials are intended for outdoor use. Begin with a level foundation, protect the plywood that remains exposed with the appropriate finish, and keep GatorSkins off this tighter transition because that material can crack on this model.
Should I choose the Garage Mini Ramp or a Pair of 3 Foot Quarter Pipes?
The Garage Mini Ramp creates one continuous 26-inch-tall half-pipe setup; its standard 8-foot version is 15 feet 8 inches long. A Pair of 3 Foot Quarter Pipes gives two separate 2-foot transitions that can face each other, sit side by side around a gap, or split into separate approaches. Choose Garage for continuous back-and-forth riding or the pair for layout flexibility.
What if a standard Garage Mini Ramp width still does not fit?
Do not trade away the approach, exit, or access around the decks just to make a standard kit fit. Use the custom-build path to discuss the available room and intended riders before choosing a width, surface, or another ramp configuration.
Specifications
Height: 26 inches
Width: 8 feet
Length: 15 feet, 8 inches
Tools Needed: Drill
Assembly Time: 4-6 Hours
Shipping Cost: FREE!
Skate Paint: Requires 1 gallon
Shipping & Product Info
Garage Mini ramp halfpipe arrives to your door in the kit form. Everything comes boxed up– ready to go! Only need a drill to install.
Our instructions manual (with user-friendly photos) makes this ramp extremely simple to build.
All materials are designed for outdoor use.
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
