Make another run part of your day
A quick session can turn into the trick you have been chasing. The 8 Foot Wide Half Pipe gives you a connected ramp to skate back and forth at home, with a three-and-a-half-foot base height. Keep that layout or add a five-foot corner, then choose the surface for your own place to practice.
Find another run at home
Eight feet across gives you a complete half-pipe layout without taking on the width of the twelve- or sixteen-foot models. Link the transition runs, kickturns and coping tricks that suit your skating, with both walls connected by the ramp's flat section. Our Ramp Shape guide helps you compare that continuous route with two separate quarter pipes.
Add height in one corner if you want it
The base ramp is three and a half feet tall, eight feet wide and 22 feet eight inches long. The five-foot option adds one raised corner section; it does not make the whole ramp five feet tall. Leave room around the ramp and access to its decks as you picture that layout. Our Space and Fit guide helps you map the base dimensions and selected corner.
Build on the included plywood layer
The kit starts with one plywood riding layer. Keep it, select a second plywood layer, or choose GatorSkins in Brown or Green or Skatelite Pro for the top riding surface. The sheet options are different materials, not different paint finishes. Our Riding Surfaces guide explains how supporting wood, riding panels and coatings work together so you can choose the surface you intend to skate.
Choose protection for the wood you expose
Add Skate Paint if you want a coating for the exposed plywood. It is a separate choice from GatorSkins or Skatelite, so choosing a riding panel does not automatically add paint to your order. Keep the coating off those panels and care for the wood elsewhere on the ramp. Our Ramp Care guide helps you plan that upkeep alongside the surface you choose.
Bring the kit together with photo instructions
The ramp arrives as pre-cut and pre-drilled components with counted hardware and photo instructions. Have a drill ready and allow about four to six hours as an assembly estimate, with the site prepared before you start. Prefer help with the build? OC Ramps installation services can quote your ramp and location, including the access and work the project needs.
What's in the Box
- One 8-foot-wide half pipe ramp kit in the selected height
- One plywood riding-surface base layer, with the selected second-plywood or premium-surface upgrade added when chosen
- Six premium-surface sheets when GatorSkins or Skatelite Pro is selected
- The correct Skate Paint amount when selected: 1 gallon for bare plywood or 1 quart for exposed plywood with a premium surface
- Pre-counted rust-resistant screws and required galvanized metal parts
- Pre-cut and pre-drilled boards with computer-cut transition pieces
- Photo instruction booklet
Shipping to the contiguous U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
8 Foot Wide Half Pipe Ramp freight delivery
This product ships by freight. OC Ramps will confirm delivery timing and the receiving requirements for the exact order. Inspect the shipment when it arrives and report visible damage promptly.
Build it yourself or add installation
Bring a drill and plan 4 to 6 hours to assemble the kit. Paid installation is available by quote. Travel, timing, site preparation, and pricing are quoted for each project.
Questions about 8 Foot Wide Half Pipe Ramp
How does the 8 Foot Wide Half Pipe compare with the 3 Foot Tall Halfpipe Ramp?
The 8 Foot Wide Half Pipe has a 3.5-foot base transition, measures 22 feet 8 inches long, and can add one 5-foot corner. The 3 Foot Tall Halfpipe keeps a 3-foot transition, offers 8-, 12-, or 16-foot widths, and measures 21 feet 8 inches long in its 8-foot version. Choose by transition layout first, then by site width.
When should I choose the 8 Foot Wide Half Pipe instead of the 5 Foot Tall Halfpipe Ramp?
The 8 Foot Wide Half Pipe is 8 feet wide, 22 feet 8 inches long, and 3.5 feet high at the base, with one optional 5-foot corner. The 5 Foot Tall Halfpipe begins at five feet, comes in 12- or 16-foot widths, uses a 30-foot base length for its 12-foot version, and can add one 7-foot corner. Choose by height and total site commitment, not surface alone.
What can riders practice on the 8 Foot Wide Half Pipe Ramp?
Use the 8 Foot Wide Half Pipe Ramp for repeated transition runs and progression on skills such as kickturns, rock-to-fakies, axle stalls, and linking tricks from wall to wall. The exact progression should match the rider's ability, the selected transition, and the clear skating area around the ramp.
How much room should I plan around the 8 Foot Wide Half Pipe Ramp?
Start with the assembled dimensions for the selected width, height, corner, and surface configuration. Then leave a clear approach, roll-away, deck access, and enough working room for assembly and maintenance. Confirm the actual site before ordering; the listed product footprint alone is not the same as a complete skating-area plan.
Can I return the 8 Foot Wide Half Pipe Ramp if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Can OC Ramps build a custom version of the 8 Foot Wide Half Pipe Ramp?
Yes. If the standard width, height, transition, or corner layout does not fit the site or intended riding, start with OC Ramps' Custom Builds page. Share the usable footprint, rider needs, desired transition, access, and location so the project can be evaluated as a custom build instead of forcing a standard kit into the wrong space.
Compare Half Pipes and Mini Ramps.
Plan the ramp before the build.
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
Specifications
Height: 3.5 feet
Width: 8 feet
Length: 22 feet, 8 inches
Tools Needed: Drill
Assembly Time: 4-6 hours
Shipping Cost: FREE!
Skate Paint: Requires 1 gallon
Shipping & Product Info
This 8′ wide halfpipe will arrive at your door, packaged and ready to come alive. Just grab your drill and get to it!
Our easy to read instructions manual (yes, we included photos) makes this ramp extremely simple to build.
All materials are designed for outdoor use.
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
