A little transition. A lot to come back for.
A quick session after work. A kickturn you want to get comfortable with. A small ramp can give you plenty of reasons to pick up your board. The 3 Foot Wide Quarter Pipe brings a two-foot-high transition to a home setup, with plywood or Skatelite surface options and photo instructions to help you put the kit together.
Make the most of a smaller skate space
You do not need a full half pipe to enjoy skating transition at home. This quarter pipe gives you one curved ramp to ride up and return from, whether you are working on kickturns or adding transition to a setup you already enjoy. Our Ramp Shape guide explains how a quarter pipe changes a session compared with a bank or a half pipe.
Measure the approach, not just the ramp
The ramp stands two feet tall, with an overall width of three feet two inches and a four-foot depth. That compact footprint is only part of the plan: leave clear space to approach the transition and roll away again. Use our Space and Fit guide to map the skating area before deciding where it will go.
Choose your surface. Protect the wood.
Keep the plywood riding surface or choose the optional Skatelite surface. Skate Paint is a separate protective coating for exposed plywood, not another sheet of riding material. If you choose Skatelite, the wood elsewhere on the ramp still needs appropriate care; do not apply Skate Paint over Skatelite. Our Riding Surfaces guide helps you understand the difference before you choose.
Enjoy the build without designing from scratch
OC Ramps provides the ramp kit, assembly hardware and instructions with photos, so you can focus on putting your quarter pipe together rather than working out a ramp design on your own. A drill is required for assembly. If you are weighing a kit against starting from plans, our DIY, Kit or Custom guide walks through what each route asks of you.
Start with the sessions you want to have
A quarter pipe can be the first feature in your home setup or the transition missing from your current one. Think about how you will skate between obstacles before adding more. If your plans call for a different size or a connected park layout, explore OC Ramps custom builds for help turning that idea into a project.
What's in the Box
- One 3-foot-wide quarter pipe ramp in the selected surface and Skate Paint configuration
- Exterior-grade lumber and plywood parts
- Pre-counted rust-resistant screws and required galvanized metal parts
- Pre-cut and pre-drilled boards with computer-cut transition pieces
- Photo instruction booklet
Shipping to the contiguous U.S.
Shipping is free to the 48 contiguous states with no order minimum. Alaska and Hawaii require a shipping quote.
Boxed kit delivery
The kit arrives packaged for assembly. Keep the components together, inspect the shipment when it arrives, and report any visible damage promptly.
Assembly planning
Assembly uses a drill and takes about 30 to 45 minutes. Build on a level foundation with the required tools and follow the photo instructions.
Questions about 3 Foot Wide Quarter Pipe Ramp
When should I choose one 3 Foot Wide Quarter Pipe instead of the pair?
Choose this single ramp when one compact transition gives the space the turn, coping, or launch feature it needs. The Pair of 3 Foot Quarter Pipes provides two complete transitions that can face each other, sit side by side, or serve separate approaches. Buy the pair only when the site can preserve a clear route to both ramps.
How does the 3 Foot Wide Quarter Pipe compare with the Jack-O Quarter Pipe?
Both are 2 feet tall, 3 feet 2 inches wide, and 4 feet deep. The standard 3 Foot Wide Quarter Pipe weighs about 68 to 70 pounds and offers plywood or Skatelite with optional paint for exposed wood. The 70-pound Jack-O keeps its fixed seasonal graphic and has no separate Skate Paint choice. Choose surface flexibility or the graphic treatment.
How does this model compare with the 4 Foot Wide Quarter Pipe?
This ramp is two feet tall, 3 feet 2 inches wide, and four feet deep. The four-foot model is taller and deeper as well as wider. Choose by the complete geometry and usable approach, not by one foot of nominal width alone.
What can riders practice on the 3 Foot Wide Quarter Pipe Ramp?
Use the 3 Foot Wide Quarter Pipe Ramp for transition practice such as kickturns, rock-to-fakies, axle stalls, and launching into a line. Its height, width, and mobility determine how it fits with the rest of the setup, so start with a clear approach and progress within the rider's ability.
Can I return the 3 Foot Wide Quarter Pipe Ramp if it is not the right fit?
Eligible unused products may be requested for return within 30 calendar days of purchase when they are in original condition and packaging with all included parts and manuals. Customized, used, skated, damaged, or incomplete products are not eligible, and freight, original shipping, processing costs, and a restocking fee may apply. Review the current OC Ramps Return Policy before ordering.
Specifications
Weight: 68 lbs, 70 lbs
Height: 2 feet
Width: 3 feet, 2 inches
Length/Depth: 4 feet
Tools Needed: Drill
Assembly Time: 30-45 minutes
Shipping Cost: FREE!
Skate Paint: Requires 1 quart
Shipping & Product Info
This 3′ quarterpipe arrives to your door, boxed up and ready to be put to the test. Only need a drill to install.
Our instructions manual (with helpful photos) makes this ramp so easy to build, your dog could do it.
All materials are designed for outdoor use. We’ve managed to make a quarterpipe small enough to keep in the garage but big enough to kick some serious butt!
View more info on where to place your halfpipe Halfpipe Foundations
View more info on how to protect your halfpipe Protect my Halfpipe
What to Expect
We have two teams working around the clock to mass produce the beloved kits that are in high demand, after all we service ALL skaters worldwide! The fabrication time in our warehouse starts when you place the order as the information prints out directly to our team to start production. After the kit is created, the next process is actual transit time. We work with several carriers for a variety of our products to help cut down on transit times and delays.
Our Quarter Pipe kits (4ft wide Quarter Pipe & larger), Half Pipes, and sheets of GatorSkins or Skatelite Pro all ship on a double size pallet (4ft wide x 8ft long) via freight carrier. As the double sized pallet leaves our warehouse, the freight carrier will then begin the transit process to get your order over to your local delivery terminal. As your shipment arrives in your local area, the freight carrier will have an appointment setter call you directly to schedule an appointment for delivery. Just like when you book an appointment with the cable company, you will be given a 4 – 8-hour window of delivery.
The freight driver will then arrive at your residential delivery address on the day of your scheduled appointment. Please note that this will be a curbside delivery. The driver will not be able to pull into your driveway or any other requested area on your property. You will want to be sure to have 2 – 3 able-bodied adults, in total, at your place of residence during the delivery window to assist with the unloading of this pallet. Provided the size and weight of these shipments, a liftgate is not permitted and drivers are unable to assist with any of the hand unloading process. The pallet is easy to breakdown to execute a hand unloading process with yourself and a few additional helping hands.
The entire unloading process may seem daunting however it is a fairly simple process that can be executed within 10 – 20 minutes! Please keep in mind that delays may occur with the delivery. We understand that this can be frustrating. If you experience a missed appointment, please reach out to us and our team is happy to help.
If you notice any damages or issues with the order upon receiving, please proceed with accepting the shipment, but notate on the delivery receipt by stating “DAMAGE” when signing the delivery receipt. You do not need to itemize any material which was damaged when accepting the shipment. Once your shipment has been unloaded and signed, please email our team directly with the damage(s), proof of signed delivery receipt which has been notated as damaged along with full length pictures of the material which was damaged. We will work on resolving the issue immediately.
 |
 |
| 1. Highest class exterior lumber and plywoods | 2. Pre-counted rust proof screws and instructions booklet with pictures |
 |
 |
| 3. Galvanized metal parts that prevent rusting | 4. Pre-cut and Pre-drilled boards ensure simple installation |
 |
|
| 5. Computerized cut pieces guarantee a perfect slope |
The internet has all sorts of terrible ideas as to how to quiet or dampen the sound of your skateboard ramp - in particular the mini ramps (or halfpipes).
You may read about wives tales on using insulation, filling the coping with whatever, or add pillows and blankets behind the ramp. We are here to clear the air….that is all nonsense.
There are really only 2 suggestions to help quiet your mini ramp.
- You can close up the back of your skateboard ramp with ¾” thick plywood. This will eliminate the hollow sound significantly. Again, don’t read into the bogus information about filling in that empty space before you close it up with plywood. It doesn’t work. Simply closing up the backend will help with the noise. Some customers will get creative with it- we’ve seen several put hinges on the backend - making a custom door for storage, etc. That is entirely optional to make use of the space. But in terms of noise levels, close it up.
- Also using a softer gel wheel is helpful to give you the incognito vibe your neighbors won’t complain about while shredding your skateboard ramp. Generally the harder the wheel, the louder they hear ya coming! Many skaters have multiple skateboards with a different set of wheels, most prefer the harder wheels during normal street skating use & then at night we switch over to the gel softer wheels so your neighbor’s can get their precious sleep & you can shred your heart out! Not every skater likes riding a gel wheel. There are many pros/cons. For this conversation, the biggest pro for having a softer wheel is the reduced noise factor. If you have neighbors that are goin to be a narc, just throw on the soft wheels!
